Long-wavelength infrared photoinduced switching of a resonanttunneling diode using the intersubband transition

Voltage switching induced by long-wavelength infrared light from a CO₂ laser was observed using a double-barrier resonant tunneling diode (RTD) biased in the bistable region and the intersubband transition (IT) between the quantum confined states. Possible optoelectronic and all-optical switching applications involving hysteresis are proposed and discussed     

Rotative quadrature phase-shift keying

A rotative quadrature phase-shift keying (RQPSK) modulation scheme is proposed. By rotating the QPSK signal constellation by pi /2 either clockwise or anticlockwise during a symbol duration, the conventional QPSK scheme can be modified to transmit 3 bits per symbol to achieve both power and bandwidth efficiency.<>     

Conformational effects in the reversed-phase chromatographic behavior of recombinant human growth hormone (rhGH) and N-methionyl recombinant human growth hormone (Met-hGH).

This paper examines the retention behavior of recombinant DNA-derived human growth hormone (rhGH) in reversed-phase chromatography and its separation from the closely related N-methionyl variant (Met-hGH). It is first shown that retention for rhGH decreases with increasing column temperature when 1-propanol (1-PrOH) is used as organic modifier. On the other hand, retention increases with temperature when acetonitrile (CH3CN) is employed. The differences in behavior for the two organic modifiers could be related to conformational changes in the protein as determined by solution and adsorption intrinsic fluorescence spectroscopy. Specifically, desorption and elution of rhGH using 1-PrOH could be correlated with a solvent-induced conformational change, with retention decreasing with increasing temperature due to the increasing ease of structural alteration. On the other hand for CH3CN the increase in retention correlated with temperature rise was related to a partial structural change yielding a more hydrophobic species. In this case, a surface-driven process is suggested. The work then turned to the separation of rhGH and Met-hGH where it was found for both organic modifiers optimum separation occurred at 45 degrees C and pH 6.5. Separate studies revealed that during the conformational change Met-hGH appeared more hydrophobic than rhGH since protein-protein aggregation was observed at a lower 1-PrOH concentration. It is suggested that this hydrophobic difference, which was optimized under the conditions cited above, resulted in the separation. The study demonstrates the importance of conformational changes in retention behavior and separation of protein samples.     

Effect of carbon dioxide pneumoperitoneum on bacteraemia and endotoxaemia in an animal model of peritonitis

The umbilicus is the site of a number of well-recognized and unusual congenital anomalies. The authors report two rare anomalies of the umbilicus, one involving the appendiceal artery and the other the appendix vermiformis.     

Uncertainty analysis and allocation of joint tolerances in robot manipulators based on interval analysis

Many uncertain factors influence the accuracy and repeatability of robots. These factors include manufacturing and assembly tolerances and deviations in actuators and controllers. The effects of these uncertain factors must be carefully analyzed to obtain a clear insight into the manipulator performance. In order to ensure the position and orientation accuracy of a robot end effector as well as to reduce the manufacturing cost of the robot, it is necessary to quantify the influence of the uncertain factors and optimally allocate the tolerances. This involves a study of the direct and inverse kinematics of robot end effectors in the presence of uncertain factors. This paper focuses on the optimal allocation of joint tolerances with consideration of the positional and directional errors of the robot end effector and the manufacturing cost. The interval analysis is used for predicting errors in the performance of robot manipulators. The Stanford manipulator is considered for illustration. The unknown joint variables are modeled as interval parameters due to the inherent uncertainty. The cost-tolerance model is assumed to be of an exponential form during optimization. The effects of the upper bounds on the minimum cost and relative deviations of the directional and positional errors of the end effector are also studied.     

Unsaturated diffusivity functions for concrete derived from NMR images

Deterioration of concrete or reinforcing steel through excessive contaminant concentration is often the result of repeated wetting and drying cycles. At each cycle, the absorption of water carries new contaminants into the unsaturated concrete. Nuclear Magnetic Resonance (NMR) is used with large concrete samples to observe the shape of the wetting profile during a simple one-dimensional wetting process. The absorption of water by dry concrete is modelled by a nonlinear diffusion equation with the unsaturated hydraulic diffusivity being a strongly nonlinear function of the moisture content. Exponential and power functions are used for the hydraulic diffusivity and corresponding solutions of the diffusion equation adequately predict the shape of the experimental wetting profile. The shape parameters, describing the wetting profile, vary little between different blends and are relatively insensitive to subsequent re-wetting experiments allowing universal parameters to be suggested for these concretes.

---

Résumé La détérioration du béton ou du béton armé à travers la concentration excessive de contaminant est souvent le résultat de cycles humides et secs répétés. A chaque cycle, l'absorption de l'eau amène de nouveaux contaminants à l'intérieur du béton non saturé en eau. Pour observer le profil du processus d'humidification, on peut utiliser la Résonance Magnétique Nucléaire (RMN) sur de grands échantillons de béton dans le cadre d'une simple étude unidimensionnelle de ce profil. Il est démontré que l'absorption d'eau par du béton sec peut être précisément modélisée par une équation de diffusion non linéaire où la diffusivité hydraulique non saturée est fonction hautement non linéaire de l'humidité du contenant. Des fonctions exponentielles et puissances peuvent définir la diffusivité hydraulique. Les solutions résultant de l'équation modélisant cette diffusion permettent de prédire avec précision la forme du profil de l'humidification expérimentale. Les paramètres de forme qui décrivent le profil de l'humidification varient peu entre les différents mélanges de béton et sont relativement insensibles à des expériences de réhumidification ultérieures. Cela permet de suggérer que ces bétons suivent des paramètres d'humidification universels.

     

Theoretical investigation of penetration characteristics in gas metal-arc welding using finite element method

In the modeling of the gas metal-arc (GMA) welding process, heat inputs to the workpiece by the arc and the metal transfers have been considered separately. The heat energy delivered due to the metal transfer has been approximated in the form of a cylindrical volumetric heat source, whose dimensions of the radius and the height are dependent on the molten metal droplet characteristics. The pinch instability theory (PIT) and the static force balance theory (SFBT) of drop detachment have independently been used to obtain the expressions for various characteristics of the drop,i.e., the drop radius, the drop velocity, and the drop frequency at various welding parameters. The occurrence or the nonoccurrence of finger penetration, routinely found in the GMA welding at high welding currents, has been satisfactorily explained by the cylindrical heat source model. The effect of various welding parameters,e.g., the welding current, the wire radiusetc., on the weld bead penetration characteristics has been investigated. In this modeling effort, the heat conduction equation has been solved in three dimensions.