Inbreeding in Swiss Braunvieh and its influence on breeding values predicted from a repeatability animal model.

Inbreeding coefficients were computed for 910,444 animals of the Swiss Braunvieh population. Of the animals born in 1984, 71.5% were inbred with 67.9, 3.4, and .2% having inbreeding coefficients between greater than 0 and 5%, greater than 5 to 10%, and greater than 10%, respectively. The average inbreeding coefficient was 1.14% but, for animals with both parents and at least one grandparent known, it was 1.67%. Breeding values for total milk, fat, and protein yields and for fat and protein percentages were predicted using a repeatability animal model including a regression on the inbreeding coefficient. Phenotypic performance was sizeably depressed for milk yield only (-26 kg/% of inbreeding or 2.4% of the phenotypic standard deviation). Adjusting for inbreeding increased the estimated genetic trend slightly. Inbreeding is only partially accounted for when it is ignored in the construction of the inverse of the numerator relationship matrix. This effect was investigated by comparing predicted breeding values from a model including the complete matrix with predicted breeding values from a model including a matrix constructed with inbreeding ignored. Only .8% of all predicted breeding values were affected by more than +/- 5.5 kg. The maximum difference observed was 55.3 kg. The observed average absolute differences between the breeding values of offspring predicted with the two models increased with inbreeding of parents.     

The Hg (Mercury) system

An erratum to this article is available at .     

The thermal ignition of lignocellulosics in infinite slab and cubic geometries

Wood shaving samples were heated in both cubic baskets and in a previously described system realising the conditions of the ‘infinite slab’ in thermal ignition. Results from the two sets of experiment were found to be totally consistent with each other.     

Visualizing the topography of coating surfaces

An optical system for imaging the topography of (coating) surfaces using a video monitor is described. The grey level of the image correlates with the slope of the surface. The principle of operation of the method is explained and some applications are indicated.     

The effect of pack-aluminisation on the microstructure of MCrAlY and the performance of thermal barrier coatings

Plasma spraying and pack-aluminising processes were combined and applied to the nickel-base superalloy Mar-M247 to improve its cyclic oxidation resistance. The performance tests of duplex ZrO₂-8 wt.%Y₂O₃/MCrAlY thermal barrier coatings (TBCs) were conducted at 1050 °C, 1075 °C, 1100 °C, 1150 °C and 1200 °C. The results of the experiments in this study showed that TBC specimens with the aluminised MCrAlY bond coat exhibited higher cyclic lives (except for the Ni-22Cr-10Al-1Y bond coat), at all the temperatures tested, than specimens on which the bond coat was not aluminised. The microstructures of the Co-29Cr-6Al-1Y, Co-32Ni-21Cr-8Al-0.5Y and Ni-22Cr-10Al-1Y bond coats with or without aluminising treatment were examined in detail using a scanning electron microscope equipped with an electron probe microanalyzer.     

Absorption spectra of solid rare earth complexes obtained from the inner filter effect on luminescence

The inner filter effect is observed in luminescence whenever a second substance is present that has absorptions which overlap the luminescence. This results in a diminution of the luminescence at those wavelengths and is generally observed in solution. In the present communication we show that this effect can be observed when a solid rare earth complex is physically mixed with a solid luminescent organic matrix with which it does not interact. The resulting luminescence is reduced in emission intensity at those wavelengths corresponding to the absorptions of the rare earth ion. This is illustrated with a mixture of Na₃[Ho(ODA)₃] ·2NaClO₄·6H₂O and pyrene at 77 K, and it is shown that the absorption spectrum of the holmium complex can be extracted from the luminescence spectrum of pyrene. This absorption spectrum is in good agreement with that obtained by conventional spectroscopy with a single crystal.     

Preparation of cross-section specimens for transmission electron microscopy from alpha-Al2O3/Ni solid state bonded bicrystal interfaces.

The technique which is described combines the advantages of the techniques formerly proposed in the literature in each stage of the preparation of transmission electron microscopy (TEM) specimens including a single metal-ceramic interface. It allows easy handling of the thin foils in spite of their brittleness. Preferential thinning of the softer material in the two-phase foil is prevented, and both sides of the interface are thinned down to comparable thicknesses. The nickel-alumina bicrystal interface observed in TEM is neat and free from any reaction layer. This method is easily adaptable to other metal-ceramic systems.     

Transmission outage models for sub-transmission network reliabilityevaluation

Methods are presented for modeling the failure and repair of transmission equipment and their impact on subtransmission system reliability. The methods account for arbitrary load variation and nonexponential downtime distribution for components. The effects of single independent outages common-mode outages and independent overlapping outages are studied. The results are used to identify conditions when nonexponentially distributed downtimes can lead to significant errors if the method of analysis does not take this factor into account