Stability studies on methyl and ethyl fatty acid esters of sunflowerseed oil

Fatty acid esters, high in linoleic acid, were prepared and stored for long-term engine tests. Storage tests with these esters were undertaken to obtain more information on optimal storage requirements and general stability characteristics. Samples were kept at three temperature levels (20 C, 30 C and fluctuating around 50 C) for a 90-day period and were removed at regular intervals for chemical and physical analysis. The influence of air, temperature, light, TBHQ and contact with mild steel was evaluated by comparing the free fatty acid, peroxide, anisidine, ultraviolet absorption, viscosity and induction periods. A statistical model was used to evaluate the data and to reduce the large number of data points to comparable curves. Storage of esters in contact with air, especially at a temperature above 30 C, resulted in significant increases in peroxide, ultraviolet absorption, free fatty acid, viscosity and anisidine values. Exclusion of air retarded oxidation at all temperature levels. A direct relationship between viscosity increases and oxidation parameters was evident. Exposure to light caused a small increase in the oxidation parameters of esters stored at the highest temperature level. Addition of TBHQ prevented oxidation of samples stored under moderate conditions. Under unfavorable storage conditions the anti-oxidant was no longer effective. Mild steel had very little effect on the oxidation parameters. Only the anisidine values of samples stored at the highest temperature level were slightly increased. Methyl esters performed slightly better than ethyl esters during the storage test. The following practical guidelines for storage of fatty acid ester fuels are: (i) airtight containers should be used; (ii) the storage temperature should be <30 C; (iii) mild steel (rust free) containers may be used, and (iv) TBHQ has a beneficial effect on oxidation stability.     

Development of alternative technical systems

This paper considers the integration of alternative technical systems (TS) belonging to a wider class of competing TS, into a supersystem. The paper introduces the notion of alternative TS, shows the peculiarities of their incorporation into a supersystem, reveals the mechanisms used for such incorporation, and shows areas of application for the suggested method.     

A slotted post-wall waveguide array with interdigital structure for 45/spl deg/ linear and dual polarization

This work proposes a dual-polarized planar antenna; two post-wall slotted waveguide arrays with orthogonal 45/spl deg/ linearly-polarized waves interdigitally share the aperture on a single layer substrate. Uniform excitation of the two-dimensional slot array is confirmed by experiment in the 25 GHz band. The isolation between two slot arrays is also investigated in terms of the relative displacement along the radiation waveguide axis in the interdigital structure. The isolation is 33.0 dB when the relative shift of slot position between the two arrays is -0.5/spl lambda//sub g/, while it is only 12.8 dB when there is no shift. The cross-polarization level in the far field is -25.2 dB for a -0.5/spl lambda//sub g/ shift, which is almost equal to that of the isolated single polarization array. It is degraded down to -9.6 dB when there is no shift.     

Social utility Functions-part II: applications

Social utilities account for agent preferences and, thus, can characterize complex interrelationships, such as cooperation, compromise, negotiation, and altruism, that can exist between agents. Satisficing game theory, which is based on social utilities, offers a framework within which to design sophisticated multiagent systems. Key features of this approach are: a) an N-agent system may be represented by a 2N-dimensional Bayesian network, called a praxeic network; b) the theory accommodates a notion of situational altruism (a willingness to defer to others in a controlled way if so doing would actually benefit others under the condition that others wish to take advantage of such largesse); and c) satisficing games admits a protocol for effective negotiation between agents who, though interested in their own welfare, are also willing to give some deference to others. Three applications are presented. The first two involve well-known two-person games: the Prisoner's Dilemma and the Battle of the Sexes, and the third is a simulated uninhabited aerial vehicle scenario.     

A stochastically optimized adaptive procedure for the location of MAS auxiliary monopoles: the case of electromagnetic scattering by dielectric cylinders

A genetically optimized technique that fully automates the potentially laborious allocation of the auxiliary monopoles for the method of auxiliary sources (MAS) is presented for the problem of electromagnetic (EM) scattering by isotropic dielectric cylinders with various cross sections. The proposed technique uses as input information not only the geometry of the scatterer but also the exciting field and the material properties of the cylinders are implicitly taking part in the optimization procedure. The resulting auxiliary surfaces, where the simulating monopoles are situated, are appropriately adapted to the original boundary surface and the MAS modeling is greatly facilitated. In addition, certain considerations are taken into account in order to avoid undesirable numerical dependencies between the fictitious monopoles. Finally, the accuracy of the numerical method combined with overdetermined systems of equations is examined for isotropic cylinders of various geometries and dielectric characteristics.     

Use of electrochemical oxidation process as post-treatment for the effluents of a UASB reactor treating cellulose pulp mill wastewater.

The main purpose of this study was to evaluate the performance of the electrochemical oxidation process as a post-treatment for the effluents of a bench-scale UASB reactor treating simulated wastewater from an unbleached pulp plant. The oxidation process was performed using a single compartment cell with two plates as electrodes. The anode was made of Ti/Ru0.3Ti0.7O2 and the cathode of stainless steel. The following variables were evaluated: current density (75, 150 and 225 mA cm(-2)) and recirculation flow rate in the electrochemical cell (0.22, 0.45 and 0.90 L h(-1)). The increase in current density from 75 to 225 mA cm(-2) did not increased the color removal efficiency for the tested flow rates, 0.22, 0.45 and 0.90 L h(-1), however the energy consumption increased significantly. The results indicated the technical feasibility of the electrochemical treatment as post-treatment for UASB reactors treating wastewaters from pulp and paper plants.     

Structure and catalytic properties of dealuminated modified zeolites Y

The effect of treatment with a zirconyl nitrate aqueous solution on the structure; the hydroxyl-layer constitution; and the adsorptive, acid, and catalytic properties of dealuminated zeolite Y was studied. The zeolite was prepared by boiling NH₄Y in an ethylenediaminetetraacetic acid disodium salt solution followed by ion exchange with ammonium chloride and calcination in a 100% steam flow at 750°C. X-ray diffraction, IR spectroscopy, and DTA data show the formation of an ultrastable form of zeolite Y. The incorporation of zirconium in zeolite led to an increase in the proportion of strong acid sites, thus raising the yield of cracking products during n-hexane conversion tested on platinum-containing catalyst samples.