Analysis of S-SEED''s characteristics in optical switch

This article introduces the basic structure of a symmetric self-electrooptic effect device （S-SEED）, and applies the Kirchoff＇ s current law and a purely equivalent capacitive model, to analyze S-SEED＇s switch characteristics. Linear approximation and N-segment approximation are utilized to obtain S-SEED＇s voltage-time （V-T） and characteristics. Theoretical analysis is verified by simulations, and the results demonstrate that the precision of S-SEED＇s switch time can satisfy the requirement in applications with linear approximation. Moreover, the simulations compare S-SEED＇s switch characteristics with different input powers and input contrast ratios, which reveal that increasing input contrast ratio is an effective way to improve S-SEED＇s switch characteristics.     

建筑物下采煤方法设计

论文针对了北掌矿井井田范围建(构)筑物多、压煤严重等特点,在分析比较充填开采和条带式开采等"建下"开采方法的技术上,确定了比较适合该矿的冒落条采法开采技术,指出新建矿井以建筑物下开采为主也可获得较好的经济社会效益。在此基础上,对条采工作面长度,保留煤柱宽度及主要指标进行了设计。     

高分辨率合成孔径雷达图像舰船检测方法

寻找针对高分辨率SAR图像的舰船目标检测算法。利用KSW双阈值分割技术，其效果比传统检测方法好，有利于进一步的目标分类和识别。且必须根据SAR图像分辨率来选择舰船检测算法。     

Automating application software generation

Many approaches have been proposed to enhance software productivity and reliability. These approaches typically fall into three categories: the engineering approach, the formal approach and the knowledge-based approach. But the optimal gain in software productivity cannot be obtained if one relies on only one of these approaches. This paper describes the work in knowledge-based software engineering conducted by the authors for the past 10 years. The final goal of the research is to develop a paradigm for software engineering which integrates the three approaches mentioned above. A knowledge-based tool which can support the whole process of software development is provided in this paper.     

一种前馈型全摆幅恒跨导准恒增益CMOS运放设计

设计了一种适合在低电源电压下工作的前馈型输入级放大结构，在全摆幅的动态工作范围内，输入级跨导保持不变，采用负载电流补偿以保证增益近似恒定，输出采用前馈型AB类输结构，实现全摆幅输出。     

A two-dimensional time-domain finite element formulation for periodic structures

A formulation is presented for a two-dimensional time-domain finite-element method (FEM-TD) that incorporates periodic boundaries. The specifics of the method are shown for scattering problems, but it should be straightforward to extend it to radiation problems. The method solves for a transformed field variable (instead of solving directly for the electric field) in order to easily enable periodic boundary conditions in the time domain. The accuracy and stability of the method is demonstrated by a series of examples where the new formulation is compared with reference solutions. Very accurate results are obtained when the excitation (frequency range) and the geometry are such that no higher order Floquet modes are present. The accuracy is degraded in the presence of higher order modes due to the rather simple absorbing boundary condition that is used with the present formulation. The method is found to be stable even for angles of incidence close to grazing.     

An experiment for showing some kind of artificial understanding

In this paper we design an experiment which can be depicted as a simple scenario, a very limited 'world'. In this world, there are an actor that can pursue a project and an observer that is keeping its eyes on the actor. We try to show in the experiment that the observer can to some degree understand the actor based on its knowledge and some metaphors, i.e. understand what the actor is doing and why. As the conclusion of this experiment, we try to show some features of 'understanding'. These are (1) that 'understanding' has to be based on some preliminary knowledge; (2) that 'understanding' is a process of incremental learning; (3) that, as for symbolic systems, some metaphors are necessary for mapping real entities into concepts in mind.     

曲靖二期工程电气、热控工艺质量策划的运用

介绍了曲靖电厂二期工程电气、热控安装工艺质量策划工艺质量的方法 ,及策划过程和划重点     

ZL101合金锶变质效果及热处理工艺的改进

对现场生产的ZLl01合金铸件材质进行了全面分析，针对存在的产品成分不准，变质效果不好，力学性能不合格的问题，通过改进合金的锶变质工艺和热处理工艺，改善了合金的组织和性能，达到了对材料的成分、性能的各项要求。     

硫酸铈和磷酸处理对铌酸表面酸度及催化活性的影响

用硫酸铈和磷酸对固体铌酸进行了表面处理。表面酸度和TG DTA测定结果表明 ,与未处理的固体铌酸相比 ,处理后表面强酸量提高 3～ 5倍 ,耐受温度由 30 0℃提高到 5 0 0～ 6 0 0℃。用于催化酯化合成二甘醇二苯甲酸酯增塑剂 ,处理后固体铌酸的催化活性和重复使用寿命有明显提高。