等离子炉炭热法冶炼钼铁

等离子炉炭热法冶炼钼铁是利用炭在高温下的强还原性，以炭热和等离子热代替金属热．直接得到优质钼铁。     

饱和软土天然含水量估算指标及ω一e回归方程的建立

天然含水量ω是土的最基本物理量指标之一。采用数理统计方法，建立经验方程来修正土的天然含水量ω的测定值，使修正后的天然含水量数值与实际中的真值符合程度更为接近，效果甚好。     

动情期家兔输卵管上皮及其分泌活动的电镜观察

本实验用透射电镜和扫描电镜观察了动情期家兔输卵管上皮。证实分泌细胞和纤毛细胞都有分泌功能，共分泌三种分泌物质。本文对这些分泌物质的分泌方式、分泌活动进行了研究和探讨。另外，发现上皮基膜下方始终有一层成纤维细胞形成的胞质膜伴行，据此，对血一输卵管腔屏障的构成亦进行了讨论。     

微光CCD摄像器件综合特性的分析与比较

ＣＣＤ的优良特性使其在微光电视技术领域得到了广泛运用。本文对各种微光ＣＣＤ摄像器件的综合特性例如信噪比、探测率、动态范围与计数模式等进行了详细的研究与对比，并得出基本结论。     

黑旺铁矿锚链主机基础开挖中的控制爆破

通过合理地选用控爆参数、起爆工艺并采取加强防护等措施，在爆破环境复杂的条件下，将爆破震动、飞石等的危害严格地控制在允许范围内，保证了爆区周围人与物的安全。     

混合结构楼房爆破拆除倒塌范围的确定

通过对混合结构楼房爆破倾倒过程特点的分析,提出了楼房在倾倒过程中的运动计算模型,并应用体积平衡原理,得到这类楼房爆破爆堆参数计算公式,用该公式计算的结果与实例中爆堆实测数据相比较,相对误差不超过11%.     

Numerical simulation of aerosol collection in filters with staggered parallel rectangular fibres

 In this paper, filters with rectangular fibres arranged in a staggered and parallel array and placed transverse to the flow are studied numerically. A two- dimensional flow field is obtained by solving Navier–Stokes equations with the control volume method. Periodic boundary conditions are introduced in the calculation. In order to achieve higher accuracy, a second-order upwind scheme is adopted and a fine mesh is arranged near the fibre and the symmetrical plane of the flow field where large gradients in velocity are expected. Particle trajectories are calculated by solving the corresponding Lagrangian equation of motion to obtain the collection efficiency of a single rectangular fibre, in which positions of the approaching particles on the inlet plane of the flow field are randomly distributed according to the Monte-Carlo principle. The simulation considers all the important mechanisms of particle capture including interception, inertial impaction and Brownian motion. Effects of fibre aspect ratio, filter packing density, particulate size and Reynolds number on the collection efficiency are numerically determined. The volumetric packing density ranges from 0.4 to 4% and the particle diameter is from 0.01 μm to 2 μm. Reynolds number based on the height of computational domain varies from 20 to 100 and the aspect ratio is from 0.1 to 10. Simulations with and without Brownian motion are carried out for different Reynolds numbers, packing densities and aspect ratios and the results show that Brownian effects are significant for particles smaller than 1 μm. Received 25 May 2001     

Atmospheric and low pressure shadow masked MOVPE growth of InGaAs(P)/InP and (In)GaAs/(Al)GaAs heterostructures and quantum wells

The shadow masked growth technique is presented as a tool to achieve thickness and bandgap variations laterally over the substrate during metalorganic vapor phase epitaxy. Lateral thickness and bandgap variations are very important for the fabrication of photonic integrated circuits, where several passive and active optical components need to be integrated on the same substrate. Several aspects of the shadow masked growth are characterized for InP based materials as well as for GaAs based materials. Thickness reductions are studied as a function of the mask dimensions, the reactor pressure, the orientation of the masked channels and the undercutting of the mask. The thickness reduction is strongly influenced by the mask dimensions and the reactor pressure, while the influence of the orientation of the channels and the amount of undercutting is only significant for narrow mask windows. During shadow masked growth, there are not only thickness variations but also compositional variations. Therefore, we studied the changes in In/Ga and As/P ratios for InGaAs and InGaAsP layers. It appears that mainly the In/Ga-ratio is responsible for compositional changes and that the As/P-ratio remains unchanged during shadow masked growth.     

对我国酱油酿造几项新技术应用之浅见

本文概述了三十年来我国酿造酱油工业开展研究的六项新技术在现阶段的投产可行性，及进一步研究方向的看法。     

厌氧胶快速渗补技术在汽车发动机上的应用

将金属铜易与过氧化物发生氧化还原反应生成游离基的原理应用于厌氧胶，开发了针时金属零件表面微孔进行局部渗补的实用技术。在相关技术可靠性和工艺可行性得以论证的前提下。将局部渗补技术成功地应用于渗补发动机泄漏缸盖，减少了废品损失，取得了良好的经济效益。