Controlling the phase stability of polymer blends through the introduction of impenetrable interfaces

In this work, the effect of the introduction of modified solid surfaces into polymer blends on the phase‐separation process was investigated. Glass fibers with surfaces having different chemistries were introduced into polystyrene–poly(methyl methacrylate) blends. The glass fibers used either had fully hydrated surfaces or had surfaces covered with a random copolymer, poly(styrene‐co‐methyl methacrylate). The copolymer was synthesized by free‐radical polymerization of styrene and methyl methacrylate in the presence of previously vinyl silane‐treated glass fibers. The copolymerization and grafting procedures were investigated by FTIR and thermal analysis. Blends containing the fibers were studied using FTIR microscopy and optical microscopy. FTIR microscopy results showed that the composition of the phases in the blends was shifted by using fibers with different surface chemistries. Fibers with grafted copolymers were capable of narrowing the immiscibility region in the phase diagram, while fully hydrated fibers were able to expand the gap. It was proposed that interfacial interactions regulated by a hydrophilic–hydrophobic type of forces were responsible for guiding the described phase‐separation process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1619–1627, 2003     

Morphology and thermomechanical properties of recycled PET–organoclay nanocomposites

Recycled PET/organoclay nanocomposites were prepared by melt intercalation process with several amounts (1, 3, and 5 wt %) of clay modified with quaternary ammonium salt (DELLITE 67G) dispersed in a recycled poly(ethylene terephthalate) (rPET) matrix. The resultant mechanical properties (modulus and yield strength) of the nanocomposites were found to be different from those of rPET. Wide angle X‐ray scattering (WAXS) and Transmission Electron Microscopy (TEM) measurements have shown that although complete exfoliation was not achieved, delaminated clay platelets could be observed. Thermal analysis did not show significant changes in the thermal properties from those of recycled PET. Mechanical testing showed that nanocomposite properties were superior to the recycled PET in terms of strength and elasticity modulus. This improvement was attributed to nanoscale effects and strong interaction between the rPET matrix and the clay interface, as revealed by WAXS and TEM. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1839–1844, 2007     

Comparative study of homogeneous and heterogeneous styrene polymerizations with Ni(acac)2/MAO catalytic system

Styrene polymerization was carried out with Ni(acac)₂/MAO and Ni(acac)₂/SiO₂/MAO. The influence of reaction parameters (Al/Ni mole ratio, catalyst concentration, temperature and time polymerization) on styrene polymerization was evaluated. It was observed that both catalytic systems were affected by reaction parameters and that the heterogeneous catalyst presented higher activity than the homogeneous one. Polystyrenes with different molecular weight, stereoregularity and polydispersity were obtained. These results suggest that different active catalyst species could have been present. In addition, two types of methylaluminoxane (MAO) with different molecular weights were also evaluated as cocatalyst. As a result, the catalyst activity and stereospecificity were strongly affected by the MAO type.     

Crosslink reaction of natural rubber with thiuram sulphur donors in the presence of a thiuram monosulfide

The vulcanization of natural rubber was studied with the sulfurating agents dipentamethylene thiuram tetrasulfide (DPTT) and tetramethylene thiuram disulfide (TMTD) in the presence of tetramethyl thiuram monosulfide (TMTM). This last accelerant affects the rate and efficiency of the vulcanization as well as the structures of crosslinks formed by the two sulphur donors. It may give rise to a polymerization between adjacent double bonds and generate a inhomogeneous crosslink distribution with an adverse effect on physical properties. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 491–499, 2002     

Lithium disilicate glass produced at high pressure: Characterization of structural,thermal and mechanical properties

In this work, high-density lithium disilicate (LS₂) vitreous systems were produced by melting and quenching under high pressure (7.7 GPa) following two distinct experimental routes. In the first case, LS₂ glass was remelted at 7.7 GPa and 1600°C and, then, quenched. In the second case, a stoichiometric mixture of precursor oxides (Li₂O and SiO₂) was melted at 1600°C and 7.7 GPa before quenching. A reference LS₂ glass sample was produced at atmospheric pressure using conventional melting and quenching procedure. The samples were characterized by X-ray diffraction, differential thermal analysis, and instrumented ultramicro hardness measurements. X-ray diffraction confirmed that all samples were amorphous and thermal analysis suggests that different glassy structures were produced depending on the route of synthesis. Hardness and elastic modulus of the glasses produced under high pressure were higher than those of the reference glass, reflecting the irreversible densification effect induced by the high-pressure processing.     

Effect of different surface treatments on polypropylene composites reinforced with yerba mate fibers: Physical,mechanical, chemical,and morphological properties

This study presents the preparation of post-consumer polypropylene (r-PP) composites filled with 30 wt% yerba mate (YM) stick particles. To improve the fiber–matrix adhesion, three surface treatments were performed: alkaline treatment with sodium hydroxide (NaOH) and use of 3-aminopropyltriethoxysilane (APTS) and maleic anhydride graft polypropylene copolymer (PP-g-MA) as coupling agents. Mechanical properties including tensile, flexural, and impact resistance were determined, and chemical (Fourier transform infrared spectroscopy [FTIR]), physical (water absorption), and morphological analyses were performed. The main findings show that the treatments were efficient in improving the mechanical properties of the composites, with emphasis on the r-PP/YM30/APTS and r-PP/YM30/PP-g-MA composites, which proved to be superior in tensile, flexion and impact strength and absorption of water compared to the untreated composite. The morphological analysis showed a better interaction between the fiber and the polymeric matrix for the composites with YM/APTS and YM/PP-g-MA, which corroborates the results of tensile and flexural strength, as well as with the spectra of FTIR in which the chemical modification of the fibers is observed. However, the results show that these treatments are promising in obtaining composites with recycled matrix with better properties.     

Real-time lane tracking using Rao-Blackwellized particle filter

A novel approach to real-time lane modeling using a single camera is proposed. The proposed method is based on an efficient design and implementation of a particle filter which applies the concepts of the Rao-Blackwellized particle filter (RBPF) by separating the state into linear and non-linear parts. As a result the dimensionality of the problem is reduced, which allows the system to perform in real-time in embedded systems. The method is used to determine the position of the vehicle inside its own lane and the curvature of the road ahead to enhance the performance of advanced driver assistance systems. The effectiveness of the method has been demonstrated implementing a prototype and testing its performance empirically on road sequences with different illumination conditions (day and nightime), pavement types, traffic density, etc. Results show that our proposal is capable of accurately determining if the vehicle is approaching the lane markings (Lane Departure Warning), and the curvature of the road ahead, achieving processing times below 2 ms per frame for laptop CPUs, and 12 ms for embedded CPUs.     

Algorithm based on simulated annealing for land-use allocation

This article describes the use of simulated annealing for allocation of land units to a set of possible uses on, the basis of their suitability for those uses, and the compactness of the total areas allotted to the same use or kind of use, which are fixed a priori. The results obtained for the Terra Chá district of Galicia (N.W. Spain) using different objective weighting schemes are compared with each other and with those obtained for this district under the same area constraints, using hierarchical optimization, ideal point analysis, and multi-objective land allocation (MOLA) to maximize average use suitability. Inclusion of compactness in the simulated annealing objective function avoids the highly disperse allocations typical of optimizations that ignore this sub-objective.     

A prototype for cartographic human body analysis

A cartographic-oriented model uses algebraic map operations to perform spatial analysis of medical data relative to the human body. A prototype system uses 3D visualization techniques to deliver analysis results. A prototype implementation suggests the model might provide the basis for a medical application tool that introduces new information insight.     

Classification of Fuzzy Mathematical Morphologies Based on Concepts of Inclusion Measure and Duality

Mathematical morphology was originally conceived as a set theoretic approach for the processing of binary images. Extensions of classical binary morphology to gray-scale morphology include approaches based on fuzzy set theory. This paper discusses and compares several well-known and new approaches towards gray-scale and fuzzy mathematical morphology. We show in particular that a certain approach to fuzzy mathematical morphology ultimately depends on the choice of a fuzzy inclusion measure and on a notion of duality. This fact gives rise to a clearly defined scheme for classifying fuzzy mathematical morphologies. The umbra and the level set approach, an extension of the threshold approach to gray-scale mathematical morphology, can also be embedded in this scheme since they can be identified with certain fuzzy approaches.