Electron-Phonon Decoupling NbSi CMB Bolometers

Precise measurements of the cosmic microwave background (CMB) is crucial to cosmology, since any proposed model of the Universe must account for the features of this radiation. E_cient very large bolometer arrays (>10,000?pixels) constitute an important challenge for CMB observations and are actually developed by many groups worldwide. We present here an explorative new bolometer design based on a structure that simplifies the fabrication process and exhibits high sensitivity. This innovative device replaces delicate membrane-based structures and eliminates the mediation of phonons: the incoming energy is directly captured and measured in the electron bath of an appropriate sensor and the thermal decoupling is achieved via the intrinsic electron-phonon decoupling of the sensor at very low temperature. Reported results come from a 204-pixel matrix of Nb _x Si_1?x transition edge sensors with a meander structure fabricated on a 2-inch silicon wafer using electron-beam co-evaporation and standard lithography process. To validate the application to CMB measurements, we have realized an optical calibration of our sample in the focal plane of a dilution cryostat test bench.     

50 mK cooling solution with an ADR precooled by a sorption cooler

CEA/SBT is currently developing a 2.5 K-50 mK cooling solution composed of a small demagnetization refrigerator (ADR) precooled by a sorption cooler, equivalent to the high temperature stage of a two-stage ADR system. Thanks to the use of this dual technology, a low weight cooler able to reach 50 mK with a heat sink up to 2.5 K can be designed. Because the sorption cooler is probably the lightest solution to produce sub-Kelvin temperatures, these developments allow us to propose a solution to face the drastic reduction in the mass budget of space missions like SPICA or IXO. The European Space Agency (ESA) is funding the development of an engineering model able to produce 1 μW net heat lift at 50 mK. It is sized so that the sorption cooler provides an additional 10 μW at 300 mK. The ESA main requirements are an autonomy of more than 24 h and a recycling time smaller than 8 h. We present the design of the system able to meet these requirements as well as the expected performances and preliminary measurements.     

A spray pyrolysis route to the undoped ZnO layer of Cu(In,Ga)(S,Se)2 solar cells

The undoped ZnO in the window layer of Cu(In,Ga)(S,Se)₂ solar cells is deposited here by a non-vacuum spray pyrolysis method yielding solar cells of similar efficiencies to cells prepared with the standard sputtered layer. The spray pyrolysis method allows the undoped ZnO to be deposited in sequence on the same apparatus or in-line directly after deposition of the spray-‘ILGAR’ (ion layer gas reaction) In₂S₃ buffer layer. Thus it is highly suitable for manufacturing, not only is spray pyrolysis economical, avoiding the need for two target sputtering systems, but for monolithic integrated modules the second ‘P2’ scribe, carried out to interconnect cells, can be undertaken before sputtering permitting the highly doped ZnO:Al front contact to directly connect to the rear Mo back contact.     

The effect of female age and ovarian reserve on pregnancy rate in male infertility: treatment of azoospermia with sperm retrieval and intracytoplasmic sperm injection

Factors other than spermatozoa could be the major determinant of the success of assisted reproduction treatment in cases of male infertility. Our aim was to evaluate the effect of the wife's age and ovarian reserve on assisted reproduction success rates in the most severe type of male infertility, i.e. azoospermia. A total of 249 consecutive couples suffering from male infertility caused by azoospermia underwent microsurgical epididymal sperm aspiration (MESA) or testicular sperm extraction (TESE) with intracytoplasmic sperm injection (ICSI). Of these men, 186 had irreparable obstructive azoospermia, and 63 had non-obstructive azoospermia due to testicular failure. Neither the pathology, the source, the quantity, nor the quality of spermatozoa had any effect on fertilization or pregnancy rates. Maternal age and ovarian reserve (number of eggs) had no effect on fertilization or embryo cleavage, but did dramatically affect the embryo implantation, pregnancy and delivery rates. Wives of azoospermic men who were in their 20s had a 46% live delivery rate per cycle, wives aged 30-36 years had a 34% live delivery rate per cycle, wives aged 37-39 years had a 13% live delivery rate per cycle, and wives > or = 40 years had only a 4% live delivery rate per cycle. The number of eggs retrieved also affected pregnancy and delivery rate, but to a lesser extent than age. In virtually all cases of obstructive azoospermia, and in 62% of cases with non-obstructive azoospermia caused by germinal failure, sufficient spermatozoa could be retrieved to perform ICSI, with normal fertilization and embryo cleavage. However, the pregnancy rate and the live delivery rate were dependent strictly on the age of the wife, and on her ovarian reserve. Unfortunately, exaggerated claims of high pregnancy rates can thus easily be made by manipulating, in a very simple way, selection for female factors.     

Long-term evaluation of implantation of fresh and cryopreserved human embryos following ovarian stimulation with buserelin acetate-human menopausal gonadotrophin (HMG) or clomiphene citrate-HMG

This study is a long-term evaluation of the total pregnancy potential of cohorts of fresh and cryopreserved sibling embryos from in-vitro fertilization (IVF) cycles stimulated with either the gonadotrophin-releasing hormone analogue buserelin (BUS) (long protocol) or clomiphene citrate (CC) both in combination with human menopausal gonadotrophin (HMG). Therefore a retrospective analysis was performed on patients who entered the IVF programme between January 1986 and July 1987 and who had triple embryo transfer in the collection cycle. Significantly more fertilized oocytes developed to good-quality embryos in the CC-HMG group (86.1%) than in the BUS-HMG group (80.8%). Transfer of the three morphologically best-looking embryos was performed in day 2 post-insemination in 106 CC-HMG and 80 BUS-HMG cycles. Supernumerary embryos were cultured for a further 24 h and multicellular embryos with up to 20% of fragments were frozen slowly with 1.5 M dimethylsulphoxide on day 3 post-insemination (162 embryos in CC-HMG cycles, 102 embryos in BUS- HMG cycles). Outcome was measured by embryo survival rate, embryo implantation rate and delivery rate in fresh and frozen embryo transfers. Delivery rates were 31.3 and 21.7% per fresh embryo transfer in BUS-HMG and CC- HMG cycles respectively. Fresh embryo implantation rates were significantly higher in collection cycles stimulated with BUS-HMG (17.9%) than in cycles stimulated with CC-HMG (11.3%). Implantation rates were significantly enhanced in embryos transferred in excess of one in cycles leading to pregnancy, perhaps indicative of higher embryo quality in BUS-HMG cycles. Almost all cryopreserved embryos have by now been thawed, so the contribution of frozen embryos to overall pregnancy rates can be evaluated. Overall morphological survival rates of frozen-thawed embryos have by now been thawed, so the contribution of frozen embryos to overall pregnancy rates can be evaluated Overall morphological survival rates of frozen-thawed embryos were similar for 140 embryos from CC-HMG cycles (50%) and 100 embryos from BUS-HMG cycles (46%). The percentage of fully intact embryos was, however, significantly lower in the BUS-HMG group (19%) than in the CC-HMG group (39.5%). Delivery rates were significantly lower following 30 transfers of frozen-thawed embryos from BUS-HMG-stimulated cycles (3.3%) than following 42 transfers of frozen-thawed embryos from CC-HMG cycles (19.1%). Embryo implantation rates were lower for frozen-thawed embryos from BUS-HMG cycles (2.3%) than from CC-HMG cycles (12.7%). Here we demonstrate that ovarian stimulation with the long protocol BUS-HMG instead of the CC-HMG protocol led to higher embryo implantation rates in collection cycles but to lower intact embryo survival rates and to lower embryo implantation rates for frozen sibling embryos. Despite the lower implantation rates with frozen embryos originating from the BUS-HMG protocol, there was no significant difference between total delivery rate per transfer from cycles stimulated with CC-HMG (30.2%) compared with BUS-HMG (33.8%).     

Outdoor Measurements of Leaf Water Content Using THz Quasi Time-Domain Spectroscopy

We report the first outdoor measurements for continuous in vivo leaf-water monitoring using THz spectroscopy. For this, we have developed a compact and portable THz quasi time-domain spectrometer which can be powered by a battery. We monitor the water status of a corn plant (Zea mays) and discuss the influence of the day-night variations of the outdoor temperature.     

Calculation of the long-range order parameter from atom probe data

In addition to the known diffraction techniques, field-ion microscopy with atom probe is well established for determining the long-range order parameter. The site occupation probabilities of the chemical species on the different sublattices may be estimated from experimental profiles. However, this evaluation method demands that the superstructure planes be identified unequivocally from the data. This condition is not fulfilled in all cases. We propose a new analytical method for which this condition need not be met.     

A New Cyclic Scheduling Algorithm for Flexible Manufacturing Systems

Flexible manufacturing system control is an NP-hard problem. A cyclic approach has been demonstrated to be adequate for an infinite scheduling problem because of maximal throughput reachability. However, it is not the only optimization criterion in general. In this article we consider the minimization of the work in process (WIP) as an economical and productivity factor. We propose a new cyclic scheduling algorithm giving the maximal throughput (a hard constraint) while minimizing WIP. This algorithm is based on progressive operations placing. A controlled beam search approach has been developed to determine at each step the schedule of the next operations. After presenting the main principles of the algorithm, we compare our approach to several most known cyclic scheduling algorithms using a significant existing example from the literature.