Edge-to-edge plane matching as a criterion for interphase boundaries of low energy

As demonstrated by Aaronson and his colleagues over five decades or so, the structure, energy, and dynamic response of interphase boundaries in metallic systems are strongly correlated. It has also become clear that very few, if any, solid/solid transformation interfaces can be considered truly “incoherent.” Most treatments of the geometry of irrational interfaces (facet planes) have focused on the density of coincidence sites or near-coincidence sites (NCS); this naturally involves consideration of the matching of densely packed atomic planes lying parallel to the facet. Edge-to-edge plane matching represents an alternative and, perhaps, more general approach to the geometry of transformation interfaces. For diffusional transformations, growth ledges are required to displace and reproduce the structure of the facet plane; their geometrical properties are distinct from those of the interfacial facets. The role of local thermodynamic driving force in determining the migration mode is assessed. Several recent observations of the transient faceting of irrational interfaces, for which the density of NCS is relatively low, have stimulated considerations of the significance of the invariant-line condition and of edge-to-edge plane matching as criteria for local minima in interfacial free energy. This article is based on a presentation made in the “Hume-Rothery Symposium on Structure and Diffusional Growth Mechanisms of Irrational Interphase Boundaries,” which occurred during the TMS Winter meeting, March 15–17, 2004, in Charlotte, NC, under the auspices of the TMS Alloy Phases Committee and the co-sponsorship of the TMS-ASM Phase Transformations Committee.     

Insiders Behaving Badly

This column goes beyond previous insider analyses to identify a framework for a taxonomy of insider threats including both malicious and inadvertent actions by insiders that put organizations or their resources at some risk. The framework includes factors reflecting the organization, the individual, the information technology system, and the environment.     

MicroRNAs in Metastasis and the Tumour Microenvironment

Metastasis is the process whereby cancer cells migrate from the primary tumour site to colonise the surrounding or distant tissue or organ. Metastasis is the primary cause of cancer-related mortality and approximately half of all cancer patients present at diagnosis with some form of metastasis. Consequently, there is a clear need to better understand metastasis in order to develop new tools to combat this process. MicroRNAs (miRNAs) regulate gene expression and play an important role in cancer development and progression including in the metastatic process. Particularly important are the roles that miRNAs play in the interaction between tumour cells and non-tumoral cells of the tumour microenvironment (TME), a process mediated largely by circulating miRNAs contained primarily in extracellular vesicles (EVs). In this review, we outline the accumulating evidence for the importance of miRNAs in the communication between tumour cells and the cells of the TME in the context of the pre-metastatic and metastatic niche.     

Engineering of Janus-Like Dendrimers with Peptides Derived from Glycoproteins of Herpes Simplex Virus Type 1: Toward a Versatile and Novel Antiviral Platform

Novel antiviral nanotherapeutics, which may inactivate the virus and block it from entering host cells, represent an important challenge to face viral global health emergencies around the world. Using a combination of bioorthogonal copper-catalyzed 1,3-dipolar alkyne/azide cycloaddition (CuAAC) and photoinitiated thiol–ene coupling, monofunctional and bifunctional peptidodendrimer conjugates were obtained. The conjugates are biocompatible and demonstrate no toxicity to cells at biologically relevant concentrations. Furthermore, the orthogonal addition of multiple copies of two different antiviral peptides on the surface of a single dendrimer allowed the resulting bioconjugates to inhibit Herpes simplex virus type 1 at both the early and the late stages of the infection process. The presented work builds on further improving this attractive design to obtain a new class of therapeutics.     

Water flux,DSC, and cytotoxicity characterization of membranes of cellulose acetate produced from sugar cane bagasse,using PEG 600

Summary In this article, cellulose acetate produced through the homogeneous acetylation of sugar cane bagasse cellulose was used to produce membranes, using poly(ethyleneglycol) 600 (PEG 600) as an admixture. The membranes were characterized using water flux measurements (Payne’s cup), differential scanning calorimetry (DSC) and neutral red uptake (cytotoxicity). The results showed that PEG 600 acts as a crystallinity inductor and/or pore former in the cellulose acetate matrix. The induction of crystallinity is important for this system since it had not been reported on the literature yet. The results also demonstrated that the studied membranes present a nontoxic behavior.     

Influence of steric length in electrosteric surfactants on emulsion polymerization

Four PPG Avanel Series S surfactants (sodium alkyl polyether sulfonates) with varying ethylene oxide content (n = 3, 7, 9, and 15) were used to investigate the influence of the steric length in this type of electrosteric stabilizers on emulsion polymerization. The polymerization studies employing potassium persulfate as an initiator with styrene, methyl methacrylate, and vinyl acetate monomers showed no apparent change in particle size, number of particles, and polymerization rate with the changing steric length of the surfactant. Steric influences were observed in the redox-initiated systems of styrene, butyl acrylate, and methyl methacrylate. Increasing the ethylene oxide unit content from three to nine units decreased the rate of polymerization, the particle size and number in the polystyrene latexes. Polymerizations with the acrylates displayed the same trend except that the polymerization rate reached a minimum value at nine ethylene oxide units and increased when the surfactant containing 15 ethylene oxide units was used.     

Morphology, structure and properties of a poly(1-butene)/montmorillonite nanocomposite

A specifically formulated nanocomposite based on isotactic poly(1-butene) (PB) and montmorillonite was studied, by wide angle X-ray diffraction (WAXD), small angle X-ray scattering (SAXS), transmission electron microscopy (TEM) and polarized light optical microscopy, investigating the polymorphism of the polymer, and examining the interaction between PB and the silicate. Montmorillonite was found to disrupt the ordered morphology of the polymer, determining a dramatic increase in the rate of the II→I phase transition. Interaction between polymer and clay was studied by TEM and SAXS also under a quantitative point of view. A significant enhancement of physical-mechanical properties was observed, even though exfoliation did not occur, but just a slight intercalation and a reduction in the size of tactoids.     

Alarm pheromone system of leaf-footed bugLeptoglossus zonatus (Heteroptera: Coreidae)

The alarm pheromone system ofLeptoglossus zonatus (Dallas) adults was shown to be composed of hexyl acetate, hexanol, hexanal, and hexanoic acid. Single components tested in the field elicited dispersive behavior of over 70% of adults. 2-(E)-Hexenal, found in the secretion of nymphs, but not in the exudates of adults, was also active against adults. In addition, first-instar nymphs responded to the four components of the alarm pheromone of adults as well as to 2-(E)-hexenal, a component of their own alarm pheromone system. Adults and nymphs possess different alarm pheromone systems, which are not specific to their own life stage. That hemipteran alarm pheromone systems are not species-specific was supported by the fact that both adult and nymphL. zonatus responded to butanoic acid, an alarm pheromone of Alydidae, which was not found in this Coreidae species.     

The role of the Tm3+ concentration on CaMoO4 properties processed by microwave hydrothermal under stirring condition

The compounds based on calcium molybdate (CaMoO₄) are the subject of extensive research due to their excellent optical properties and a broad range of potential technological applications. In this work, we report a systematic study of CaMoO₄:Tm³⁺ phosphors synthesized by coprecipitation and processed in a microwave-hydrothermal system at low temperature (100°C) and stirring. The effect of the Tm³⁺ doping content (0%–12%) is studied in full detail to understand their role in the CaMoO₄:Tm³⁺ morphological, structural, and luminescent properties. The X-ray diffraction, Raman, and Fourier Transform Infrared spectroscopic techniques revealed that all the prepared powders have a tetragonal crystal structure with a distinct density of cation vacancies and structural disorders. The band gap remains almost constant for doping levels lower than 8%, but it narrows strongly for powders doped with 12% Tm³⁺ ions. The designed phosphors have shown two emission bands in which intensity depends on the Tm³⁺ ions doping level. For doping levels lower than 2%, the photoluminescence profile displays a broad emission band peaking at 543 nm (green). For concentrations higher than 4%, the band centered at 543 nm decreases in intensity and the near-infrared emission band at around 800 nm, assigned to ³F₃, ³H₄ → ³H₆ transitions from Tm³⁺ ion, become more intense. The outcomes of this work reveal that appropriated Tm³⁺ ions doping levels can be applied to suppress the PL emission in the visible range and improve that in the near-infrared region in CaMoO₄-based materials.     

Synthesis and characterization of eugenol-based silicone modified waterborne polyurethane with excellent properties

A eugenol-based silicone-containing monomer 4,4′-(1,1,3,3-tetramethyldisiloxane-1,3-dipropyl)bis-2-methoxyphenol(EUSi) was synthesized from eugenol and 1,1,3,3-tetramethyldisiloxane via the hydrosilylation reaction. And waterborne polyurethane (WPU) with excellent properties was obtained by using EUSi as a type of diol chain extender. The unique combination of rigidity and flexibility in the chemical structure of EUSi greatly facilitated the mechanical properties, thermal properties, and water resistance of WPU. With only a 3% dosage of EUSi, the maximum tensile strength was increased from 6.2 to 22.4 MPa, while the water absorption was decreased from 31.3% to a surprisingly 7.6%. Our work provides a new convenient strategy for the preparation of organosilicon-modified WPU with improved performance.