Modeling Crosstalk Effects in CNT Bus Architectures

Carbon nanotubes (CNTs) have been widely proposed as interconnect fabric for nano and very deep submicron (silicon-based) technologies due to their robustness to electromigration. In this paper, issues associated with crosstalk among bus lines implemented by CNTs are investigated in detail. CNT-based interconnects are modeled and the effects of crosstalk on performance and correct operation are evaluated by simulation. Existing models are modified to account for geometries in bus architectures made of parallel single-walled nanotubes and a single multiwalled nanotube. New RLC equivalent circuits are proposed for these bus architectures. A novel bus architecture with low crosstalk features is also proposed. This bus architecture is made of dual-walled nanotubes arranged in parallel. In this architecture, the crosstalk-induced delay and corresponding uncertainty (as well as crosstalk-induced peak voltage) are significantly reduced; a modest area penalty is incurred. Reductions up to 59% for the crosstalk-induced delay and up to 81% for the crosstalk-induced peak voltage are reported. These results confirm that the proposed bus arrangement noticeably improves performance and provides reliable operation     

A new epitope presenting system displays a HIV-1 V3 loop sequence and induces neutralizing antibodies

The principal neutralizing domain, IGPGRAF sequence, from the V3-loop of HIV-1 was inserted in two positions on the surface of the protein that makes up the capside shell of the insect Flock House Virus. The hybrid proteins were expressed in insect cells via recombinant baculoviruses. Three different hybrids were used as immunogens: two with a single copy of the insert in different positions of the carrier protein and a third with two copies of the insert at the same positions as before. All hybrid proteins induced strong and broad specific immune response in guinea pigs against different V3-loop sequences. However, only one of the hybrid proteins was able to induce a strong neutralizing response against MN and IIIB HIV-1 isolates. Our results demonstrate that a very short peptide sequence of HIV-1 can constitute a valuable immunogen able to induce a neutralizing response if presented to the immune system in the context of the FHV capsomer structure.     

Energy and comfort: A new type for TRNSYS

Two subroutines have been developed which permit users of the TRNSYS programme to calculate the parameters of ambiental comfort (PMV and PPD).The first subroutine deals with the calculation of the view factors inside a room for all the values of the spatial coordinates and, thus, permits the average radiant temperature to be calculated in every position. The second subroutine has been developed in accordance with the indications of the ISO 7730 standard.Both subroutines have been validated and then interfaced to TRNSYS.The integrated programme has been utilised to compare the performances of different heating systems in terms of energy consumption and comfort, maintaining the temperature of the interior constant for different climatic conditions.     

Comparative Rheomechanical and Adhesive Properties of Two Hydrocolloid Dressings: Dependence on the Degree of Hydration

Hydration is believed to modify the mechanical properties (resistance to stress) and the rheological (viscoelastic) properties of hydrocolloid dressings. Rheomechanical properties in turn influence adhesional properties. In this work the relationships between the degree of hydration and the rheomechanical and the adhesive properties of two different commercial dressings (regular and nondispersive) were investigated. The two dressings showed different hydration characteristics. The regular dressing takes up water rapidly and tends to reach saturation after 12 hr. As the dressing swells and loses its integrity there is an accompanying reduction of both rheomechanical and adhesive properties. The nondispersive dressing exhibits a linear water uptake profile over extended periods of hydration up to 4 days. It does not swell and its rheomechanical and adhesive properties remain unchanged after hydration, The comparative evaluation of the results obtained with the various methods points to the relevance of mechanical and viscoelastic properties to the functionality assessment of dressings.     

Effect of steel fibres at two different stages: The material and the structure

The addition of steel fibres to plain concrete is intended both to improve the material's ductility and that of the structure in which it is used. These two effects of steel fibres are clearly distinguishable through an analysis of cracking both at a local and a global level. This analysis is essential if the use of steel fibres is to be optimized.     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

The combined use of ultrasound and densitometry in the prediction of vertebral fracture

Measurement of ultrasonographic parameters provides information concerning not only bone density but also bone architecture. We investigated the usefulness of ultrasonographic parameters and bone mineral density for evaluating the probability of vertebral fracture. 397 postmenopausal women (59.1 +/- 6.0 years) with (n = 178) or without (n = 219) atraumatic vertebral fractures were studied. In all women, bone mineral density (BMD) of the lumbar spine was evaluated by dual X-ray absorptiometry (DXA) and speed of sound (SOS); broadband ultrasound attenuation (BUA) and Stiffness in the calcaneus were evaluated by an Achilles unit (Lunar Corporation). Ultrasonographic parameters and BMD were compared by examining the magnitude of the odds ratios, to determine which produces the highest estimate of the probability of odds of fracture, and by examining widths of the respective confidence intervals (CI) to show which estimate of odd ratio is the most precise. The relative risk of vertebral fracture, after adjusting for potential confounders, was 3.5 (CI 2.6-4.8) for BUA; 4.5 (CI 3.2-6.2) for SOS; 5.8 (CI 4.0-8.4) for Stiffness and 7.5 (CI 4.8-11.5) for BMD. Ultrasound (US) parameters were still significant independent predictors of vertebral fracture, even after adjusting for BMD. The relative risk of fracture for a simultaneous decrease by 1 SD of BMD and by 1 SD of each ultrasound parameter was 17.3 (CI 9.4-39.6) for BMD and SOS; 18.3 (CI 8.4-30.6) for BMD and BUA and 22.1 (CI 8.9-52.7) for BMD and Stiffness. Our data suggest that US and BMD provide complementary information which can be combined to improve estimates of vertebral fracture risk.     

Spinal reflex pattern to foot nociceptive stimulation in standing humans

We describe here the results of a screening program conducted to discover inhibitors of the type-I interleukin-1 receptor (IL-1RI) from samples of microbial origin. An innovative approach, based on automated, nonradioactive receptor binding assays has been employed. Specially prepared cell-free systems have allowed the use of high concentrations of microbial metabolites in the reaction mixtures with a low percentage of false positives. More than 30,000 microbial samples from different species of soil isolates have been tested and two interesting activities have been purified and characterized. One of these, isolated from Streptomyces sp. GE48009, was identified as niphimycin, an antifungal agent also known as scopafungin. Preliminary evidence suggests that this molecule and azalomycin F, a structural analogue, inhibit IL-IRI by virtue of their long-chain guanidinium moiety. The other activity, isolated from Aspergillus sp. GE49752, was identified as flavipin, a substituted o-phthalaldehyde.     

Auditory hallucinations suppressed by etizolam in a patient with schizophrenia

A patient presented with a 15 year history of schizophrenia with auditory hallucinations. Though unresponsive to prolonged trials of neuroleptics, the auditory hallucinations disappeared with etizolam.     

Robust control of permanent magnet motors: VSS techniques lead tosimple hardware implementations

It is shown how very simple velocity-tracking robust controllers for permanent magnet motors driving nonlinear loads can be designed based on variable structure systems techniques. Very fast dynamics, accurate and robust velocity-tracking are achieved with very simple hardware components without resorting to powerful digital signal processors and related interface hardware. A cascade control structure is used to ensure maximum flexibility. The controller for a DC motor is considered in great detail. Extension to AC synchronous PM motors is also presented. At the different control levels robustness is addressed with specific algorithms and the simplest solution is always selected. The controller architecture for both DC and AC synchronous motor are presented and discussed in the paper. Experimental results related to the control of a DC motor driving a nonlinear load are also shown. They demonstrate feasibility and excellent performances of the proposed approach