Collective decision making: a great opportunity for constraint reasoning

Collective decision making is an area of increasingly growing interest, mainly due to the rise of many IT-enabled environments where people connect and share information with others. We believe that constraint reasoning can have a major impact in this field, by providing general and flexible frameworks to model agents’ preferences over the alternative decisions, efficient algorithms to compute the best individual and collective decisions, and innovative approaches to deal with missing information. However, in order to do this, we claim that constraint reasoning should increase its efforts to open up to other research areas, such as voting and game theory, multi-agent systems, machine learning, and reasoning under uncertainty.     

Influence of steric length in electrosteric surfactants on emulsion polymerization

Four PPG Avanel Series S surfactants (sodium alkyl polyether sulfonates) with varying ethylene oxide content (n = 3, 7, 9, and 15) were used to investigate the influence of the steric length in this type of electrosteric stabilizers on emulsion polymerization. The polymerization studies employing potassium persulfate as an initiator with styrene, methyl methacrylate, and vinyl acetate monomers showed no apparent change in particle size, number of particles, and polymerization rate with the changing steric length of the surfactant. Steric influences were observed in the redox-initiated systems of styrene, butyl acrylate, and methyl methacrylate. Increasing the ethylene oxide unit content from three to nine units decreased the rate of polymerization, the particle size and number in the polystyrene latexes. Polymerizations with the acrylates displayed the same trend except that the polymerization rate reached a minimum value at nine ethylene oxide units and increased when the surfactant containing 15 ethylene oxide units was used.     

Morphology, structure and properties of a poly(1-butene)/montmorillonite nanocomposite

A specifically formulated nanocomposite based on isotactic poly(1-butene) (PB) and montmorillonite was studied, by wide angle X-ray diffraction (WAXD), small angle X-ray scattering (SAXS), transmission electron microscopy (TEM) and polarized light optical microscopy, investigating the polymorphism of the polymer, and examining the interaction between PB and the silicate. Montmorillonite was found to disrupt the ordered morphology of the polymer, determining a dramatic increase in the rate of the II→I phase transition. Interaction between polymer and clay was studied by TEM and SAXS also under a quantitative point of view. A significant enhancement of physical-mechanical properties was observed, even though exfoliation did not occur, but just a slight intercalation and a reduction in the size of tactoids.     

Identification of two glutamic acid residues essential for catalysis in the {beta}-glycosidase from the thermoacidophilic archaeon Sulfolobus solfataricus

The Sulfolobus solfataricus, strain MT4, ß-glycosidase(Ssßgly) is a thermophilic member of glycohydrolasefamily 1. To identify active-site residues, glutamic acids 206and 387 have been changed to isosteric glutamine by site-directedmutagenesis. Mutant proteins have been purified to homogeneityusing the Schistosoma japonicum glutathione S-transferase (GST)fusion system. The proteolytic cleavage of the chimeric proteinwith thrombin was only obtainable after the introduction ofa molecular spacer between the GST and the Ssß-glydomains. The Glu387 Gin mutant showed no detectable activity,as expected for the residue acting as the nucleophile of thereaction. The Glu206 Gin mutant showed 10- and 60-fold reducedactivities on aryl-galacto and aryl-glucosides, respectively,when compared with the wild type. Moreover, a significant K_mdecrease with plo-nitrophenyl-ß-D-glucoside was observed.The residual activity of the Glu206 Gln mutant lost the typicalpH dependence shown by the wild type. These data suggest thatGlu206 acts as the general acid/base catalyst in the hydrolysisreaction.     

Alarm pheromone system of leaf-footed bugLeptoglossus zonatus (Heteroptera: Coreidae)

The alarm pheromone system ofLeptoglossus zonatus (Dallas) adults was shown to be composed of hexyl acetate, hexanol, hexanal, and hexanoic acid. Single components tested in the field elicited dispersive behavior of over 70% of adults. 2-(E)-Hexenal, found in the secretion of nymphs, but not in the exudates of adults, was also active against adults. In addition, first-instar nymphs responded to the four components of the alarm pheromone of adults as well as to 2-(E)-hexenal, a component of their own alarm pheromone system. Adults and nymphs possess different alarm pheromone systems, which are not specific to their own life stage. That hemipteran alarm pheromone systems are not species-specific was supported by the fact that both adult and nymphL. zonatus responded to butanoic acid, an alarm pheromone of Alydidae, which was not found in this Coreidae species.     

Influence of water vapour on high-temperature oxidation of Al2O3-MgO-doped hot-pressed silicon nitride

Silicon nitride is particularly sensitive to high-temperature oxidation. The intensity of oxidation is influenced by the chemical composition of the amorphous phases present at the grain boundaries and consequently by the sintering additives responsible for their formation. The presence of water vapour increases Si₃N₄ oxidation also in intermediate temperature conditions. In this study the influence of water vapour pressure at high temperature (1200°C) on the corrosion of hot-pressed silicon nitride (HPSN) doped with Al₂O₃-MgO was evaluated. The water vapour has a great influence on the devitrification of the amorphous oxide upper layer, due to the formation of crystalline oxides (primarily cristobalite and tridymite). This process increases the oxidation rate, consequently increasing the porosity of the exposed surface. The microstructural evolution of HPSN in the presence of water vapour at 1200°C was analysed by SEM and XRD.     

Induced Defensive Response of Myrtle Oak to Foliar Insect Herbivory in Ambient and Elevated Co2

The rising level of atmospheric CO2 has stimulated several recent studies attempting to predict the effects of increased CO2 on ecological communities. However, most of these studies have been conducted in the benign conditions of the laboratory and in the absence of herbivores. In the current study, we utilized large octagonal chambers, which enclosed portions of an intact scrub-oak community to investigate the interactive effects of CO2 and insect herbivory on myrtle oak, Quercus myrtifolia. Specifically, we assessed the effects of ambient and elevated CO2 (2x current concentrations) on percent foliar nitrogen, C:N ratio, total relative foliar tannin content, and the presence of leaf damage caused by leaf mining and leaf chewing insects that feed on myrtle oak. Total foliar N declined and C:N ratios increased significantly in oaks in elevated CO2 chambers. The percentages of leaves damaged by either leafminers or leaf chewers tended to be lower in elevated compared to ambient chambers, but they co-occurred on leaves less than expected, regardless of CO2 treatment. Leaves that had been either mined or chewed exhibited a similar wounding or defensive response; they had an average of 25 and 21% higher protein binding ability, which is correlated with tannin concentration, compared to nondamaged control leaves, respectively. While the protein-binding ability (expressed as total percent tannin) of leaves from elevated CO2 was slightly higher than from leaves grown in ambient chambers, this difference was not significant.     

Lecithin-protein interaction in the GTP-dependent acyl-CoA synthase

The enzymic activity of the GTP-dependent acyl-CoA synthase isolated from rat liver mitochondria is affected by removal and addition of lecithin (3). Purified preparations of this enzyme contain bound lecithin. In this presentation the nature of the lecithin-protein interaction is examined. From binding measurements at different temperatures it is possible to postulate which type of secondary valence bonds is holding the protein and lecithin together. Presented at AOCS Meeting, Chicago, October 1967.     

Ability of reflection high energy electron diffraction (RHEED) to observe structural modifications in ion-implanted and annealed GaAs

GaAs 100 wafers were implanted and later annealed by using three different techniques: furnace thermal annealing (FTA), flash lamp (RTA) and low-power laser annealing (LPLA). The resulting modifications of the structure were studied by RHEED. The RHEED pattern analysis indicates that: (a) A well annealed structure is observed after thermal treatment in furnace at 850 °C for 30 min; (b) the particular RTA employed leads to some texturing, but is not sufficient to provide good structural effects; (c) best annealing under our conditions is obtained by the LPLA technique, especially for low ion doses (less than 10¹³ cm^–2); (d) variable-glancing-angle RHEED is an effective and convenient method to investigate the ion induced disorder in crystals at small depths.     

The role of the Tm3+ concentration on CaMoO4 properties processed by microwave hydrothermal under stirring condition

The compounds based on calcium molybdate (CaMoO₄) are the subject of extensive research due to their excellent optical properties and a broad range of potential technological applications. In this work, we report a systematic study of CaMoO₄:Tm³⁺ phosphors synthesized by coprecipitation and processed in a microwave-hydrothermal system at low temperature (100°C) and stirring. The effect of the Tm³⁺ doping content (0%–12%) is studied in full detail to understand their role in the CaMoO₄:Tm³⁺ morphological, structural, and luminescent properties. The X-ray diffraction, Raman, and Fourier Transform Infrared spectroscopic techniques revealed that all the prepared powders have a tetragonal crystal structure with a distinct density of cation vacancies and structural disorders. The band gap remains almost constant for doping levels lower than 8%, but it narrows strongly for powders doped with 12% Tm³⁺ ions. The designed phosphors have shown two emission bands in which intensity depends on the Tm³⁺ ions doping level. For doping levels lower than 2%, the photoluminescence profile displays a broad emission band peaking at 543 nm (green). For concentrations higher than 4%, the band centered at 543 nm decreases in intensity and the near-infrared emission band at around 800 nm, assigned to ³F₃, ³H₄ → ³H₆ transitions from Tm³⁺ ion, become more intense. The outcomes of this work reveal that appropriated Tm³⁺ ions doping levels can be applied to suppress the PL emission in the visible range and improve that in the near-infrared region in CaMoO₄-based materials.