Samplinghelper a web-based tool to assess the reliability of sampling strategies in sewers and receiving waters

Sampling is a key step in the analysis of chemical compounds. It is particularly important in the environmental field, for example for wastewater effluents, wet-weather discharges or streams in which the flows and concentrations vary greatly over time. In contrast to the improvements that have occurred in analytical measurement, developments in the field of sampling are less active. However, sampling errors may exceed by an order of magnitude those related to analytical processes. We proposed an Internet-based application based on a sampling theory to identify and quantify the errors in the process of taking samples. This general theory of sampling, already applied to different areas, helps to answer questions related to the number of samples, their volume, their representativeness, etc. The use of the internet to host this application facilitates use of theoretical tools and raise awareness of the uncertainties related to sampling. An example is presented, which highlights the importance of the sampling step in the quality of analytical results.     

Non-encapsulated thermo-liquid crystals for digital particle tracking thermography/velocimetry in microfluidics

The ever accelerating state of technology has powered an increasing interest in heat transfer solutions and process engineering innovations in the microfluidics domain. In order to carry out such developments, reliable heat transfer diagnostic techniques are necessary. Thermo-liquid crystal (TLC) thermography, in combination with particle image velocimetry, has been a widely accepted and commonly used technique for the simultaneous measurement and characterization of temperature and velocity fields in macroscopic fluid flows for several decades. However, low seeding density, volume illumination, and low TLC particle image quality at high magnifications present unsurpassed challenges to its application to three-dimensional flows with microscopic dimensions. In this work, a measurement technique to evaluate the color response of individual non-encapsulated TLC particles is presented. A Shirasu porous glass membrane emulsification approach was used to produce the non-encapsulated TLC particles with a narrow size distribution and a multi-variable calibration procedure, making use of all three RGB and HSI color components, as well as the proper orthogonally decomposed RGB components, was used to achieve unprecedented low uncertainty levels in the temperature estimation of individual particles, opening the door to simultaneous temperature and velocity tracking using 3D velocimetry techniques.     

Cost-Based Filtering Techniques for Stochastic Inventory Control Under Service Level Constraints

This paper¹ considers a single product and a single stocking location production/inventory control problem given a non-stationary stochastic demand. Under a widely-used control policy for this type of inventory system, the objective is to find the optimal number of replenishments, their timings and their respective order-up-to-levels that meet customer demands to a required service level. We extend a known CP approach for this problem using three cost-based filtering methods. Our approach can solve to optimality instances of realistic size much more efficiently than previous approaches, often with no search effort at all. This work was supported by Science Foundation Ireland under Grant No. 03/CE3/I405 as part of the Centre for Telecommunications Value-Chain-Driven Research (CTVR) and Grant No. 00/PI.1/C075. ¹This paper is an extended version of [19].     

Arrays of anamorphic phase-matched Fresnel elements for diode-to-fiber coupling

A method for designing microlens arrays that inherently takes into account application requirements and fabrication constraints is presented. Elements with numerical apertures of up to 0.5 have been designed and fabricated by laser beam writing in photoresist and replication in plastic material. In a laser-diode-to-fiber array coupling experiment, an overall optical throughput of 60% was achieved. By means of anamorphic microlens arrays, correction of the laser-diode longitudinal astigmatism and circularization of the image-plane irradiance distribution are demonstrated.     

Engineered microparticles based on drug–polymer coprecipitates for ocular-controlled delivery of Ciprofloxacin: influence of technological parameters

Abstract

Ciprofloxacin is a drug active against a broad spectrum of aerobic Gram-positive and Gram-negative bacteria, for the therapy of ocular infections. It requires frequent administrations owing to rapid ocular clearance and it is a good candidate for ocular controlled release formulations. The preparation of such drug release systems is still a challenge. Ionic interactions between ciprofloxacin and the polyelectrolytes chondroitin sulfate or lambda carrageenan result in coprecipitates that can act as microparticulate controlled release systems from which the drug is released after being displaced by the medium’s ions. In some formulations, Carbopol was added to improve the mucoadhesive properties. The aim of this research was the study of the influence of the technological parameters of the preparation method of coprecipitates on their particle size, with the goal of achieving particles engineered with a size suitable for the ocular administration. Technological parameters taken into account were: concentration of drug and polymer solutions utilized for the preparation of interaction products, possible use of surfactants (kind and concentration), temperature of the solutions and stirring during the process of preparation of the coprecipitates. Preliminary stability study tests were carried out to further characterize the leader formulation. Particle size in suspensions for ocular drug delivery is a critical parameter influencing the quality of the formulation. The results obtained from this study show that chondroitin sulfate coprecipitates present the best characteristics in terms of particle size suitable for ocular administration. A further improvement of the particle size characteristics has been obtained with the addition of surfactants.     

Minimum Setup Minimum Aberration Two‐level Split‐plot Type Designs for Physical Prototype Testing

Although new technologies allow for less effort in prototyping, physical testing still remains an important step in the product development cycle. Well‐planned experiments are useful to guide the decision‐making process. During the design of an experiment, one of the challenges is to balance limited resources and system constraints to obtain useful information. It is common that prototypes are composed of several parts, with some parts more difficult to assemble than others. And, usually, there is only one piece available of each part type and a large number of different setups. Under these conditions, designs with randomization restrictions become attractive approaches. Considering this scenario, a new and additional criterion, minimum setup, to construct split‐plot type designs is presented. Designs with the minimum number of setups of the more difficult parts, which are especially useful for screening purposes in physical prototype testing, are discussed. The use of the proposed criterion combined with minimum aberration for selecting a regular design is shown through a real application in testing car prototypes. As a tool to practitioners, catalogs of selected 32‐run minimum setup minimum aberration split‐split‐plot and split‐split‐split‐plot designs are presented. More complete catalogs are available as Supporting information. Copyright © 2015 John Wiley & Sons, Ltd.     

Coordinating Java agents over the WWW

We introduce Jada, a programming toolkit for coordinating agents written in Java. Coordination among either concurrent threads or distributed Java objects is achieved via shared object spaces. By exchanging objects through object spaces, Java agents or applets can exchange data or synchronize their actions over the Internet, a LAN, a single host, or even inside a Javaenabled browser. The access to an object space is performed using a set of methods of an ObjectSpace object. Such operations inspired by the Linda language are powerful enough to solve several coordination problems. Moreover, we show how Jada can be used as a coordination kernel for more complex coordination architectures.     

Synthesis and glutathione S-transferase structure-affinity relationships of nonpeptide and peptidase-stable glutathione analogues

A series of nonpeptidic glutathione analogues where the peptide bonds were replaced by simple carbon-carbon bonds or isosteric E double bonds were prepared. The optimal length for the two alkyl chains on either side of the mercaptomethyl group was evaluated using structure-affinity relationships. Affinities of the analogues 14a-f, 23, and 25 were evaluated for a recombinant GST enzyme using a new affinity chromatography method previously developed in our laboratory. Analysis of these analogues gives an additional understanding for GST affinity requirements: (a) the carbon skeleton must conserve that of glutathione since analogue 14a showed the best affinity (IC50 = 5.2 microM); (b) the GST G site is not able to accommodate a chain length elongation of one methylene group (no affinity for analogues 14c,f); (c) a one-methylene group chain length reduction is tolerated, much more for the "Glu side" (14d, IC50 = 10.1 microM) than for the "Gly side" (14b, IC50 = 1800 microM); (d) the mercaptomethyl group must remain at position 5 as shown from the null affinity of the 6-mercaptomethyl analogue 14e; (e) the additional peptide isosteric E double bond (25) or hydroxyl derivative (23) in 14e did not help to retrieve affinity. This work reveals useful information for the design of new selective nonpeptidic and peptidase-stable glutathione analogues.     

Effect of loading rate on the tensile behaviour of concrete: description of the physical mechanisms

Founded upon several works carried out by the Laboratoire Central des Ponts et Chaussées on the dynamic behaviour of concrete (already published), and upon new ideas about this subject, this article attempts to further develop the analysis of the physical mechanisms. In particular to investigate how the Stéfan effect, the cracking process, and the inertia forces participate together in the dynamic behaviour of a specimen subjected to a uniaxial tensile test. These mechanisms can be summed up as follows:

1. At strain rates smaller than approximately 1 s^?1, the main physical mechanism is a viscous mechanism that may be regarded as similar to the Stéfan effect. This mechanism counters both a microcracking localization, leading to an increase of concrete tensile strength, and the macrocrack propagation that leads to failure of the specimen.
2. At strain rates greater than or equal to approximately 10s^?1, the forces of inertia become preponderant. They counter microcracking localization and in particular macrocrack propagation.