Inkjet Printed Nanopatterned Aptamer‐Based Sensors for Improved Optical Detection of Foodborne Pathogens

The increasing incidence of infectious outbreaks from contaminated food and water supply continues imposing a global burden for food safety, creating a market demand for on‐site, disposable, easy‐to‐use, and cost‐efficient devices. Despite of the rapid growth of biosensors field and the generation of breakthrough technologies, more than 80% of the platforms developed at lab‐scale never will get to meet the market. This work aims to provide a cost‐efficient, reliable, and repeatable approach for the detection of foodborne pathogens in real samples. For the first time an optimized inkjet printing platform is proposed taking advantage of a carefully controlled nanopatterning of novel carboxyl‐functionalized aptameric ink on a nitrocellulose substrate for the highly efficient detection of E. coli O157:H7 (25 colony forming units (CFU) mL^?1 in pure culture and 233 CFU mL^?1 in ground beef) demonstrating the ability to control the variation within ±1 SD for at least 75% of the data collected even at very low concentrations. From the best of the knowledge this work reports the lowest limit of detection of the state of the art for paper‐based optical detection of E. coli O157:H7, with enough evidence (p > 0.05) to prove its high specificity at genus, species, strain, and serotype level.     

Influence of Oxygen on the Tribomechanical Properties of Single Crystals of YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7−<Emphasis Type="Italic">δ</Emphasis></Subscript>

This paper reports a study on the mechanical and tribological properties of ab- and a (b) c?planes of YBa₂Cu₃O_7?δ single crystals. The single crystals were grown using a CuO-BaO self-flux method. The oxygenation effect on the mechanical and tribological properties of ab- and a (b) c?planes is reported. For the ab- plane, the hardness and elastic modulus were around 6 and 50 GPa, respectively. In this case, significant differences were not observed among the hardness and elastic modulus at different oxygenation states. However, the hardness and elastic modulus for as-grown and oxygenated YBa₂Cu₃O_7?δ single crystals were different from that of the a (b) c?plane, and were observed to be slightly higher for the as-grown than for the oxygenated samples. For as-grown and oxygenated samples, we observed hardness values around 4.7 and 2.0 GPa, respectively. Regarding the elastic modulus, the values were 75 and 40 GPa, respectively. The indentation fracture toughness values on the ab- plane for the as-grown and oxygenated YBa₂Cu₃O_7?δ single crystal were 3.7 ± 1.2 and 2.9 ± 1.2 MPa m^1/2, respectively. For the ab- plane, the scratch resistance of the as-grown sample was higher than that of the oxygenated sample and the scratches under load were deeper for the oxygenated sample. As regards the a (b) c?plane, the scar features were seemingly constant through all the scratch lengths and the scratches under load were deeper and larger for the oxygenated than that for the as-grown sample.     

Quaternary 2D Transition Metal Dichalcogenides (TMDs) with Tunable Bandgap

Alloying/doping in 2D material is important due to wide range bandgap tunability. Increasing the number of components would increase the degree of freedom which can provide more flexibility in tuning the bandgap and also reduces the growth temperature. Here, synthesis of quaternary alloys Mo_x W_1?x S_2y Se_{2(1?y )} is reported using chemical vapor deposition. The composition of alloys is tuned by changing the growth temperatures. As a result, the bandgap can be tuned which varies from 1.61 to 1.85 eV. The detailed theoretical calculation supports the experimental observation and shows a possibility of wide tunability of bandgap.     

Engineering Cell Surface Function with DNA Origami

A specific and reversible method is reported to engineer cell‐membrane function by embedding DNA‐origami nanodevices onto the cell surface. Robust membrane functionalization across epithelial, mesenchymal, and nonadherent immune cells is achieved with DNA nanoplatforms that enable functions including the construction of higher‐order DNA assemblies at the cell surface and programed cell–cell adhesion between homotypic and heterotypic cells via sequence‐specific DNA hybridization. It is anticipated that integration of DNA‐origami nanodevices can transform the cell membrane into an engineered material that can mimic, manipulate, and measure biophysical and biochemical function within the plasma membrane of living cells.     

Microgravity Effects on Chronoamperometric Ammonia Oxidation Reaction at Platinum Nanoparticles on Modified Mesoporous Carbon Supports

The effect of microgravity on the electrochemical oxidation of ammonia at platinum nanoparticles supported on modified mesoporous carbons (MPC) with three different pore diameters (64, 100, and 137 Å) was studied via the chronoamperometric technique in a half-cell. The catalysts were prepared by a H₂ reductive process of PtCl\(_{6}^{\mathrm {4-}}\) in presence of the mesoporous carbon support materials. A microgravity environment was obtained with an average gravity of less than 0.02 g created aboard an airplane performing parabolic maneuvers. Results show the chronoamperommetry of the ammonia oxidation reaction in 1.0 M NH₄OH at 0.60 V vs. RHE under microgravity conditions. The current density, in all three catalysts, decreased while in microgravity conditions when compared to ground based experiments. Under microgravity, all three catalysts yielded a decrease in ammonia oxidation reaction current density between 25 to 63% versus terrestrial experimental results, in time scales between 1 and 15 s. The Pt catalyst prepared with mesoporous carbon of 137 Å porous showed the smallest changes, between 25 to 48%. Nanostructuring catalyst materials have an effect on the level of current density decrease under microgravity conditions.     

Lithium-Battery Anode Gains Additional Functionality for Neuromorphic Computing through Metal–Insulator Phase Separation

Specialized hardware for neural networks requires materials with tunable symmetry, retention, and speed at low power consumption. The study proposes lithium titanates, originally developed as Li-ion battery anode materials, as promising candidates for memristive-based neuromorphic computing hardware. By using ex- and in operando spectroscopy to monitor the lithium filling and emptying of structural positions during electrochemical measurements, the study also investigates the controlled formation of a metallic phase (Li₇Ti₅O₁₂) percolating through an insulating medium (Li₄Ti₅O₁₂) with no volume changes under voltage bias, thereby controlling the spatially averaged conductivity of the film device. A theoretical model to explain the observed hysteretic switching behavior based on electrochemical nonequilibrium thermodynamics is presented, in which the metal-insulator transition results from electrically driven phase separation of Li₄Ti₅O₁₂ and Li₇Ti₅O₁₂. Ability of highly lithiated phase of Li₇Ti₅O₁₂ for Deep Neural Network applications is reported, given the large retentions and symmetry, and opportunity for the low lithiated phase of Li₄Ti₅O₁₂ toward Spiking Neural Network applications, due to the shorter retention and large resistance changes. The findings pave the way for lithium oxides to enable thin-film memristive devices with adjustable symmetry and retention.     

Heat Capacity and Thermal Damping Properties of Spin-Crossover Molecules: A New Look at an Old Topic

The thermally induced spin-crossover (SCO) phenomenon in transition metal complexes is an entropy-driven process, which has been extensively studied through calorimetric methods. Yet, the excess heat capacity associated with the molecular spin-state switching has never been explored for practical applications. Herein, the thermal damping effect of an SCO film is experimentally assessed by monitoring the transient heating response of SCO-coated metallic microwires, Joule-heated by current pulses. A damping of the wire temperature, up to 10%, is evidenced on a time scale of tens of microseconds due to the spin-state switching of the molecular film. Fast heat-charging dynamics and negligible fatigability are demonstrated, which, together with the solid-solid nature of the spin transition, appear as promising features for achieving thermal energy management applications in functional devices.     

CANDYBOTS: A New Generation of 3D-Printed Sugar-Based Transient Small-Scale Robots

Sugars are ubiquitous in food, and are among the main sources of energy for almost all forms of life. Sugars can also form structural building blocks such as cellulose in plants. Because of their inherent degradability and biocompatibility characteristics, sugars are compelling materials for transient devices. Here, an additive manufacturing approach for the production of magnetic sugar-based composites is introduced. First, it is shown that sugar-based 3D architectures can be 3D printed by selective laser sintering. This method enables not only the caramelization chemistry but also the mechanical properties of the sugar architectures to be adjusted by varying the laser energy. It is also demonstrated that mixtures of sugar and magnetic particles can be processed as 3D composites. As a proof of concept, a sugar-based millimeter-scale helical swimmer, which is capable of corkscrew motion in a solution with a viscosity comparable to those of biological fluids, is fabricated. The millirobot quickly dissolves in water, while being manipulated through magnetic fields. The present fabrication method can pave the way to a new generation of transient sugar-based small-scale robots for minimally invasive procedures. Due to their rapid dissolution, sugars can be used as an intermediate step for transporting swarms of particles to specific target locations.     

Activated carbon from agave wastes (agave tequilana) for supercapacitors via potentiostatic floating test

To prepare an efficient supercapacitor, an activated carbon from agave wastes was prepared and their electrochemical performance was evaluated as a novel electrode for supercapacitor. The carbon was prepared by two thermal pyrolysis processes under nitrogen atmosphere. The first pyrolysis was achieved at 500 °C until the charring of the bagasse; in the second pyrolysis step, the char was impregnated with different mass ratios of KOH (1:2–1:4) and thermally treated at 800 or 900 °C, for 1 h under N₂ flow. The textural analysis showed that the activated carbon had a specific surface area of 1462 m² g^?1 and depicted a type I isotherm (IUPAC) characteristic of a microporous carbon. Raman spectroscopy and XRD measurements confirm that the activated carbon contains a small graphitization degree and a disordered structure. The electrochemical study of the symmetric carbon supercapacitor was carried out in 1 M Li₂SO₄ solution as the electrolyte. The electrochemical performance of the coin cell supercapacitor was evaluated under an accelerated aging floating test consisting of potentiostatic steps at different voltages (1.5, 1.6 and 1.8 V) for 10 h followed by galvanostatic charge/discharge sequences, and the overall procedure summarized a floating time up to 200 h. The highest capacitance was observed at a floating voltage of 1.5 V, with a large initial specific capacitance of 297 F g^?1.

     

A multi-objective approach for multi-material topology and shape optimization

An automated multi-material approach that integrates multi-objective Topology Optimization (TO) and multi-objective shape optimization is presented. A new ant colony optimization algorithm is presented and applied to solving the TO problem, estimating a trade-off set of initial topologies or distributions of material. The solutions found usually present irregular boundaries, which are not desirable in applications. Thus, shape parameterization of the internal boundaries of the design region, and subsequent shape optimization, is performed to improve the quality of the estimated Pareto-optimal solutions. The selection of solutions for shape optimization is done by using the PROMETHEE II decision-making method. The parameterization process involves identifying the boundaries of different materials and describing these boundaries by non-uniform rational B-spline curves. The proposed approach is applied to the optimization of a C-core magnetic actuator, with two objectives: the maximization of the attractive force on the armature and the minimization of the volume of permanent magnet material.