Calorimetric output power measurements on a CW 20 kW 7.16 GHzmicrowave transmitter

A calorimetric measurement technique developed for NASA's Deep Space Network (DSN) transmitters that does not require data on the coolant's thermal parameters is described. Calibration of the measurement system is achieved by measuring the DC input power to the klystron and relating coolant temperature increase to this known power dissipation. Agreement between calorimetric and electrical measurements of total system power was good, the difference being less than 2%. The operation of the system was not greatly affected by the composition of the coolant, which was varied from pure water to 40% ethylene glycol by mass. Good accuracy was also shown at output power levels, which varied over a 3.6:1 range     

Call admission control schemes under generalized processor sharing scheduling

Provision of Quality‐of‐Service (QoS) guarantees is an important and challenging issue in the design of integrated‐services packet networks. Call admission control is an integral part of the challenge and is closely related to other aspects of networks such as service models, scheduling disciplines, traffic characterization and QoS specification. In this paper we provide a theoretical framework within which call admission control schemes with multiple statistical QoS guarantees can be constructed for the Generalized Processor Sharing (GPS) scheduling discipline. Using this framework, we present several admission control schemes for both session‐based and class‐based service models. The theoretical framework is based on recent results in the statistical analysis of the GPS scheduling discipline and the theory of effective bandwidths. Both optimal schemes and suboptimal schemes requiring less computational effort are studied under these service models. The QoS metric considered is loss probability. This revised version was published online in June 2006 with corrections to the Cover Date.     

Supplementation of coconut oil from different sources to the diet induces cellular damage and rapid changes in fatty acid composition of chick liver and hepatic mitochondria

PURPOSE OF THE STUDY: Impaction in pertrochanteric fracture sites is a well known phenomenon; the screw-plate system is designed to stabilise the fracture. Although easier to use, the risk with the nail-plate system is postoperative penetration of the nail into the joint. The present study was conducted to determine the exact conditions of the impaction, and to identify possible ways to improve the nail-plate system. MATERIAL-METHOD: The study included 129 cases of pertrochanteric fracture, excluding sub-trochanteric fractures. All fractures were fixed with a 130 degrees angulated nail-plate. In all cases, consolidation was uneventful after 8 to a 12 weeks. The anatomical type of fracture, i.e. stable or unstable, was determined according to the size of the intermediary fragment, including the trochanter minor. The displacement was measured as the difference between the length of the nail and the length of the femoral head and neck measured along the axis of the femoral neck. The parameters examined were: fracture stability degree, bony mineralisation (Singh Index), nail length, femoral neck, length nail position in the femoral head, and above all, fracture reduction. All these parameters were computerised and compared using Stat View statistics software. RESULTS: Impaction was observed in 43 per cent of cases. Among these, 25 per cent were rated as slight (1 to 5 mm), 18 per cent as moderate (over 5 mm) and 9 per cent as marked (10 to 25 mm). Impaction was associated with demineralisation of the bone tissue (p = 0.001). The anatomical classification of the fracture was not a determining factor (p = 0.19), as marked displacements were also recorded in stable fractures. A posterior and inferior position of the intramedullary nail in the femoral head is one of displacement determining factors (p = 0.004, two-sided 1 test). Valgus over-correction is the most important factor, especially when it is associated with bony demineralisation (p = 0.02) and an inadequately centred intramedullary pin (p = 0.02). Shorter the femoral neck, and shorter the nail, greater was the frequency of nail articular penetration. DISCUSSION: The risk of articular penetration therefore reaches 15 per cent in petrochanteric fractures repaired with a nail plate, set at an angle of 130 degrees. A short neck, a cervicodiaphyseal angle superior to 140 degrees, and demineralisation are the three determining parameters. Stable or unstable fracture has in fact little effect on displacement incidence, and therefore does not, on its own, warrant the use of a prosthesis in comminuted fractures. The authors compared their results to literature on progressive sliding system: the incidence of complications associated with this type of fracture treatment is identical, but the determining parameters are different. CONCLUSION: The study shows that the nail-plate is efficient and provides simple and solid fracture fixation. However, this osteosynthesis material needs to be modified in order to improve its fixation in the femoral head.     

Integrating scheduling and control functions in computer integrated manufacturing using artificial intelligence

Proper integration of scheduling and control in Flexible Manufacturing Systems will make available the required level of decision-making capacity to provide a flexibly-automated, efficient, and quality manufacturing process. To achieve this level of integration, the developments in computer technology and sophisticated techniques of artificial intelligence (AI) should be applied to such FMS functions as scheduling. In this paper, we present an Intelligent Scheduling System for FMS under development that makes use of the integration of two AI technologies. These two AI technologies — Neural Networks and Expert Systems — provide the intelligence that the scheduling function requires in order to generate goodschedules within the restrictions imposed by real-time problems. Because the system has the ability to plan ahead and learn, it has a higher probability of success than conventional approaches. The adaptive behavior that will be achieved contribute to the integration of scheduling and control in FMS.     

The Los Alamos beacon receiver array

Describes radio receivers that monitor transmissions from beacons on geosynchronous satellites. The receivers can detect ionospheric perturbations of a 300-3000 s period in the electron density integrated from beacon to receiver, for amplitudes as low as (1-2)×10¹³ m^-2. Data are used in studies of atmospheric acoustic and acoustic-gravity waves     

Longitudinal investigation of the abstinence violation effect in binge eaters.

This study, guided in part by G. A. Marlatt and J. R. Gordon's (1985) abstinence violation effect (AVE) model, examined whether variability in cognitive and emotional reactions to binges accounts for recurrence of binge eating. Attributional, cognitive, and affective reactions to 2 successive binges, as well as the latencies between each binge and a subsequent binge, were evaluated through a series of structured phone interviews with 50 nonpurging normal-weight female bingers. Reported mood after binging was unrelated to binge latency. However, when Ss made more intense internal, global, and uncontrollable causal attributions for a binge, a subsequent binge followed significantly sooner. Within-subject variations in AVEs across binges prospectively predicted within-subject variations in the speed with which another binge followed. Analyses suggested that cognitive states (e.g., AVE and guilt) evoked by particular events were better predictors of how quickly binging repeats than were stable differences in attributional style. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

A new airmass independent formulation for the Linke turbidity coefficient

We propose a new formulation for the Linke turbidity coefficient with the objective of removing its dependence upon solar geometry. In the process, we also develop two new simple clear sky models for global and direct normal irradiance.     

Investigation of Scale Formation in Heat Exchangers of Phosphoric Acid Evaporator Plants

The primary problem in concentrating phosphoric acid is due to fouling on the tube‐side of the heat exchangers of the evaporator units. Scaling on the heat transfer surfaces occurs because of high supersaturation of phosphoric acid liquor with respect to calcium sulphate. A review of the existing literature reveals that no information is available on heat transfer and on crystallization fouling of industrial phosphoric acid solutions. In this investigation, the solubility of different calcium sulphate types in phosphoric acid solution was studied and its dependency on acid concentration and temperature was investigated. A large number of fouling experiments were carried out in a side‐stream of a phosphoric acid plant at different flow velocities, surface temperatures and concentrations to determine the mechanisms, which control the deposition process. After identifying the effects of operational parameters on the deposition process, a model was developed for prediction of fouling resistances. The reaction of calcium sulphate crystallization followed a second order rate with respect to the supersaturation. The activation energy evaluated for the surface reaction of the deposit formation was found to be 57 kJ/mol. The predicted fouling resistances were compared with the experimental data. Quantitative and qualitative agreement between measured and predicted fouling rates is good.