On the variability of manual spike sorting

The analysis of action potentials, or "spikes," is central to systems neuroscience research. Spikes are typically identified from raw waveforms manually for off-line analysis or automatically by human-configured algorithms for on-line applications. The variability of manual spike "sorting" is studied and its implications for neural prostheses discussed. Waveforms were recorded using a micro-electrode array and were used to construct a statistically similar synthetic dataset. Results showed wide variability in the number of neurons and spikes detected in real data. Additionally, average error rates of 23% false positive and 30% false negative were found for synthetic data.     

Computer Simulations of VANETs Using Realistic City Topologies

Researchers in vehicular ad hoc networks (VANETs) commonly use simulation to test new algorithms and techniques. This is the case because of the high cost and labor involved in deploying and testing vehicles in real outdoor scenarios. However, when determining the factors that should be taken into account in these simulations, some factors such as realistic road topologies and presence of obstacles are rarely addressed. In this paper, we first evaluate the packet error rate (PER) through actual measurements in an outdoor road scenario, and deduce a close model of the PER for VANETs. Secondly, we introduce a topology-based visibility scheme such that road dimension and geometry can be accounted for, in addition to line-of-sight. We then combine these factors to determine when warning messages (i.e., messages that warn drivers of danger and hazards) are successfully received in a VANET. Through extensive simulations using different road topologies, city maps, and visibility schemes, we show these factors can impact warning message dissemination time and packet delivery rate.     

A 1.44-mW, 1-MHz bandwidth continuous-time Σ∆ modulator with 10-bit ENOB in 130-nm CMOS

A low-power, low-pass continuous-time sigma-delta A/D modulator with 1-MHz bandwidth is implemented in a 130-nm CMOS process. The circuit is targeted for an IEEE 802.15.4 direct conversion receiver operating in the 2.4-GHz band. It has a third-order feedforward single-loop filter and a 1-bit quantizer to minimize power consumption. Non-return-to-zero DAC pulse shaping is used to reduce sensitivity to clock jitter. Clocked at 64 MHz, the prototype chip achieves 62-dB peak SNR, −70-dB peak THD, 63-dB dynamic range with an oversampling ratio of 32. The built-in anti-alias filter provides alias attenuation greater than 57 dB, which improves coexistence of the receiver with other devices that operate in the 2.4-GHz band. The circuit dissipates 1.44 mW from the 1.2-V supply and the active die area is 0.1 mm².     

Technological development of Brazilian telecommunications in past decades

Brazilian telecommunications sector has undergone important modifications in the last 40 years. From a badly structured system of municipal level operators in 1960, with barely one million fixed lines to a large, nation-wide system with about 50 million fixed plus another 75 million mobile lines in 2005. This work paper reviews the institutional framework of telecommunications industrial and technological policy in Brazil in the last four decades, its results and present situation. Infrastructure and services modernisation and expansion process that happened in early 1970s were carried out at the expense of massive import of products and technology. A government strategy was, then, devised to stimulate local industrial and technological development in telecommunications, under the general guidelines of import substitution policy. Essential to this strategy was the creation of an innovation system around TELEBRÁS Research and Development Centre. This technological development model was successful while a protectionist economic policy existed. When economic and political circumstances could not anymore sustain an import substitution approach, in the 1990-decade, the model fell apart and has not been replaced by any other sectorial policy. A critical assessment is carried out, analysing the adopted actions in face of the digital technology maturing process that occurred in meantime.     

High-throughput analysis of multispectral images of breast cancer tissue.

Statistical analysis of genetic changes within cell nuclei that are far from the primary tumor would help determine whether such changes have occurred prior to tumor invasion. To determine whether the gene amplification in cells is morphologically and/or genetically related to the primary tumor requires quantitative evaluation of a large number of cell nuclei from continuous meaningful structures such as milk-ducts, tumors, etc., located relatively far from the primary tumor. To address this issue, we have designed an integrated image analysis software system for high-throughput segmentation of nuclei. Filters such as Beltrami flow-based reaction-diffusion, directional diffusion, etc., were used to pre-process the images resulting in a better segmentation. The accurate shape of the segmented nucleus was recovered using an iterative "shrink-wrap" operation. The study of two cases of ductal carcinoma in situ in breast tissue supports the biological observation regarding the existence of a preferential intraductal invasion, and therefore a common origin, between the primary tumor and the gene amplification in the cell-nuclei lining the ductal structures in the breast.     

对DRAM结构中影响良率的缺陷进行监控

与上一代设计规则相比，亚100nm设计规则DRAM的开发和制造面临着前所未有的挑战。按照新型设计概念，由于器件结构不断缩小，其外形特征的深．宽比增大，这样就给工艺控制增加了难度。因此要求寻找一种能够对带状缺陷和孔洞缺陷进行可靠检测的高深．宽比（HAR）检测方法。另外，由于缺陷尺寸接近小型特征尺寸，许多从前认为不那么严重的缺陷如今变得极具损害力。因而缺陷检测和良率控制技术的改良成为加速开发并实现批量生产的基础。     

Energy harvesting with pairs of variable capacitors without control circuits

This work describes several electronic electrostatic generators that can be built using two pairs of complementary variable capacitors, in a way that dispenses control circuits for their operation. In all cases, a basic unstable generator based on an electrostatic charge multiplier is used to bias variable capacitors, and the current generated by these capacitors is then rectified and sent to the load. Experimental versions of the proposed generators were built using variable capacitors made with 3D-printing techniques, moved in a back-and-forth way by a small motor. As these generators operate at high impedance level, always with small currents, they are insensitive to the resistivity of the conductive plastic used to make the variable capacitors. Several new structures are presented, and their properties are evaluated theoretically and experimentally.     

Deterministic Polymorphic Engineering of MoTe2 for Photonic and Optoelectronic Applications

Developing selective and coherent polymorphic crystals at the nanoscale offers a novel strategy for designing integrated architectures for photonic and optoelectronic applications such as metasurfaces, optical gratings, photodetectors, and image sensors. Here, a direct optical writing approach is demonstrated to deterministically create polymorphic 2D materials by locally inducing metallic 1T′-MoTe₂ on the semiconducting 2H-MoTe₂ host layer. In the polymorphic-engineered MoTe₂, 2H- and 1T′- crystalline phases exhibit strong optical contrast from near-infrared to telecom-band ranges (1–1.5 µm), due to the change in the band structure and increase in surface roughness. Sevenfold enhancement of third harmonic generation intensity is realized with conversion efficiency (susceptibility) of ≈1.7 × 10⁻⁷ (1.1 × 10⁻¹⁹ m² V⁻²) and ≈1.7 × 10⁻⁸ (0.3 × 10⁻¹⁹ m² V⁻²) for 1T′ and 2H-MoTe₂, respectively at telecom-band ultrafast pump laser. Lastly, based on polymorphic engineering on MoTe₂, a Schottky photodiode with a high photoresponsivity of 90 AW⁻¹ is demonstrated. This study proposes facile polymorphic engineered structures that will greatly benefit realizing integrated photonics and optoelectronic circuits.     

Self‐Assembly of Atomically Thin Chiral Copper Heterostructures Templated by Black Phosphorus

The fabrication of 2D systems for electronic devices is not straightforward, with top‐down low‐yield methods often employed leading to irregular nanostructures and lower quality devices. Here, a simple and reproducible method to trigger self‐assembly of arrays of high aspect‐ratio chiral copper heterostructures templated by the structural anisotropy in black phosphorus (BP) nanosheets is presented. Using quantitative atomic resolution aberration‐corrected scanning transmission electron microscopy imaging, in situ heating transmission electron microscopy and electron energy‐loss spectroscopy arrays of heterostructures forming at speeds exceeding 100 nm s^?1 and displaying long‐range order over micrometers are observed. The controlled instigation of the self‐assembly of the Cu heterostructures embedded in BP is achieved using conventional electron beam lithography combined with site specific placement of Cu nanoparticles. Density functional theory calculations are used to investigate the atomic structure and suggest a metallic nature of the Cu heterostructures grown in BP. The findings of this new hybrid material with unique dimensionality, chirality, and metallic nature and its triggered self‐assembly open new and exciting opportunities for next generation, self‐assembling devices.