Split-sum correlator simplifies range computations in GPS receiver

A novel correlator architecture for handling the satellite-to-receiver time skew in a Global Positioning System (GPS) receiver is presented. The correlator's signal integration and numerically-controlled oscillator updates are referenced to receiver time epochs rather than satellite epochs as in traditional architectures. To avoid straddling navigation data bits, the correlation is split into two parts. The technique was successfully implemented and integrated into a field programmable gate array-based multichannel software GPS receiver     

设计与制造之间的界面优化

分辨率增强技术（RET）设计流程中聚集了各式各样的点工具和方法。当前对深亚波长可制造性（DFM）设计的要求迫使设计与制造行业必须建立十分密切的合作关系。同时也促使EDA行业提供一种平台，以促进这些行业间的密切交流。合理利用这一平台将会对产能和品质产生直接的影响。     

Vortex matter in superconductor/ferromagnet hybrids

Vortex pinning in type-II superconducting films can be effectively controlled by combining these films with different ferromagnetic nanostructures. In this article an overview is presented of different types of ferromagnetic pinning centers. The investigated hybrid structures consist of Pb films that are deposited on top of arrays of ferromagnetic dots with in-plane magnetization (IMP) or out-of-plane magnetization (OPM), ferromagnetic films with IPM or OPM that contain arrays of submicron holes (antidots), or continuous films with OPM and a magnetic domain structure. Interesting effects such as field-polarity dependent vortex pinning and the dependence of the pinning strength on the domain structure of the ferromagnet are observed. Our experiments demonstrate that vortex pinning in superconductors is strongly influenced by the magnetic properties of the different ferromagnetic pinning centers.     

Software release management for component‐based software

Software release management is the process through which software is made available to and obtained by its users. Until now, this process has been relatively straightforward. However, the emergence of component‐based software is complicating software release management. Increasingly, software is constructed via the assembly of pre‐existing, independently produced, and independently released components. Both developers and users of such software are affected by these complications. Developers need to accurately document the complex and changing dependencies among the components constituting the software. Users must be involved in locating, retrieving, and assembling components in order to appropriately bring the software into their particular environment. In this paper, we introduce the problem of release management for component‐based software and discuss SRM, a prototype software release management tool we have developed that supports both developers and users in the software release management process. Copyright © 2002 John Wiley & Sons, Ltd.     

ISO 9000 versus CMM: Standardization and certification of IS development

A growing number of software developers use standards as a basis for their quality systems. Some of them go one step further and have their quality systems certified. In this paper, two well-known quality standards, ISO 9000 and the CMM, are compared. It is concluded that both standards are useful but there is a growing need for more specific standards.     

Providing adaptive QoS to layered video over wireless local area networks through real-time retry limit adaptation

Robust streaming of video over 802.11 wireless LANs (WLANs) poses many challenges, including coping with packets losses caused by network buffer overflow or link erasures. In this paper, we propose a novel error protection method that can provide adaptive quality-of-service (QoS) to layered coded video by utilizing priority queueing at the network layer and retry-limit adaptation at the link layer. The design of our method is motivated by the observation that the retry limit settings of the MAC layer can be optimized in such a way that the overall packet losses that are caused by either link erasure or buffer overflow are minimized. We developed a real-time retry limit adaptation algorithm to trace the optimal retry limit for both the single-queue (or single-layer) and multiqueue (or multilayer) cases. The video layers are unequally protected over the wireless link by the MAC with different retry limits. In our proposed transmission framework, these retry limits are dynamically adapted depending on the wireless channel conditions and traffic characteristics. Furthermore, the proposed priority queueing discipline is enhanced with packet filtering and purging functionalities that can significantly save bandwidth by discarding obsolete or un-decodable packets from the buffer. Simulations show that the proposed cross-layer protection mechanism can significantly improve the received video quality.     

Measuring the sensitivity of microwave components to bias variations

This paper presents a method to measure the sensitivity of microwave components to memory effects caused by the dc biasing circuit. This allows us to determine the required (impedance) properties of the dc biasing circuit to reduce slow dynamics under a certain level. The proposed measurement technique is based on the nonlinear vectorial network analyzer, which allows us to measure not only the absolute magnitude but also the absolute phase relations between the waves. Superimposing a multisine excitation signal on the dc bias allows us to measure the slow dynamics caused by the dc biasing circuit as a function of frequency and input power. Furthermore, it is verified whether or not the measured phenomena depend on the type of excitation signal.     

Evaluation of a multimode fiber optic low coherence interferometer for path length resolved Doppler measurements of diffuse light

The performance of a graded index multimode fiber optic low coherence Mach-Zehnder interferometer with phase modulation is analyzed. Investigated aspects were its ability to measure path length distributions and to perform path length resolved Doppler measurements of multiple scattered photons in a turbid suspension of particles undergoing Brownian and translational motion. The path length resolution of this instrument is compared with a system using single mode fibers for illumination and detection. The optical path lengths are determined from the zero order moment of the phase modulation peak in the power spectrum. The weighted first moment, which is equal to the average Doppler shift, shows a linear response for different mean flow velocities within the physiological range.     

Model-based quantification of EELS spectra: Including the fine structure

An extension to model-based electron energy loss spectroscopy (EELS) quantification is reported to improve the possibility of modelling fine structure changes in electron energy loss spectra. An equalisation function is used in the energy loss near edge structure (ELNES) region to model the differences between a single atom differential cross section and the cross section for an atom in a crystal. The equalisation function can be shown to approximate the relative density of unoccupied states for the given excitation edge. On a set of 200 experimental h-BN spectra, this technique leads to statistically acceptable models resulting into unbiased estimates of relative concentrations and making the estimated precisions come very close to the Cramér-Rao lower bound (CRLB). The method greatly expands the useability of model-based EELS quantification to spectra with pronounced fine structure. Another benefit of this model is that one also gets an estimate of the unoccupied density of states for a given excitation edge, without having to do background removal and deconvolution, making the outcome intrinsically more reliable and less noisy.     

Differential automatic zero-adjusting amplifier

A method is described for building a low-voltage-drift differential dc amplifier featuring automatic zero adjustment, a high input impedance, and a bandwidth of 10 kHz. This is achieved by an asymmetric two-step process between the input signal and ground. Bandwidth can be extended by the use of a second amplifier during the ground-sampling time. The amplifier can be made with standard electronic components. A major advantage of this method is that an existing amplifier can easily be converted into a low-voltage-drift amplifier by adding the essential elements of the described automatic zero-adjusting amplifier to its input stage. To illustrate the method a practical example is constructed featuring a drift of 0.2 microV/ degrees C.