Authenticity Control of Roasted Coffee Brands Using Near-Infrared Spectroscopy

In this work, a methodology based on near-infrared spectroscopy (NIRS) was exploited in order to discriminate between commercial coffee brands. The main advantages of this approach compared to other strategies (e.g., wet chemistry methods) are its lower cost, less labor, and lower time per analysis. Two commercial brands were discriminated among several others present in the Portuguese market. The chemometric method used to estimate discriminant models was partial least squares discriminant analysis (PLSDA). Results show that it is possible to discriminate coffee brands using this strategy with a correct classification of 100 %. The spectral region, more favorable to discrimination of roasted coffee brands, can be related with differences in the concentrations of compounds, such as, chlorogenic acid and sucrose, and also due to differences on lipid fraction. This methodology is adequate for field implementation, namely, adopting handheld NIRS instruments.     

The Douro wine region: a cluster approach

The globalization of the wine industry needs to be perceived as a challenge and an opportunity to innovate by traditional European producers’ countries, like Portugal, characterized by a terroir model, that is, an economic structure supported by a large number of grape growers, small and medium wine firms and high public regulation, to compete in international markets. Using a cluster approach, this article presents the case of the most important Portuguese wine region, the Demarcated Douro Region (DDR), which is a strong reference of terroir and known for producing Port wine. To increase its competitiveness in the world wine market, the DDR needs to evolve from an organized to an innovative cluster.     

Effect of phosvitin on lipid and protein oxidation in ground beef treated with high hydrostatic pressure

In this study, we aimed to examine the effect of phosvitin on lipid and protein oxidation of raw and cooked ground beef treated with high hydrostatic pressure (HHP). Ground beef patty with 0, 500, or 1000 mg phosvitin/kg meat was treated with HHP at 0.1, 300, or 600 MPa. Half of the patties were used in a raw meat analysis, and the other half were used in a cooked meat analysis. Phosvitin and HHP treatment at 300 MPa synergistically reduced microbial growth, and HHP treatment at 600 MPa reduced microbial counts to undetectable levels (< 1 log CFU/g) throughout the length of the study in all samples. Phosvitin delayed lipid and protein oxidation in HHP-treated cooked and raw ground beef, respectively. However, phosvitin had no effect on the color changes of raw ground beef attributable to HHP. The results indicated that phosvitin could enhance the stability of lipids and proteins but not color changes of raw ground beef caused by HHP.     

Enhanced biodiversity and pollination in UK agroforestry systems

Monoculture farming systems have had serious environmental impacts such as loss of biodiversity and pollinator decline. The authors explain how temperate agroforestry systems show potential in being able to deliver multiple environmental benefits.     

Antimicrobial effects of silver nanoparticles against bacterial cells adhered to stainless steel surfaces

Given the increasing number of antibiotic-resistant bacteria and the need to synthesize new antimicrobials, silver has attracted interest in the scientific community because of its recognized antimicrobial activity. This study aimed to evaluate the antimicrobial effects of silver nanoparticles (NP) obtained by a new method and tested at concentrations of 6 μg/ml and 60 μg/ml against the species Staphylococcus aureus, Listeria innocua, Salmonella Choleraesuis, Pseudomonas aeruginosa, Escherichia coli, and Bacillus cereus. The ability of these nanoparticles to remove or kill vegetative cells adhered to stainless steel surfaces was also evaluated. We observed that the NP obtained with the new method, concentrated silver nanoparticles (CNP), and silver nanoparticles with added sodium chloride (NPNaCl) had high antimicrobial activities (P < 0.05). We also verified that the most effective condition for the removal of P. aeruginosa cells on stainless steel coupons (10 by 10 mm) was immersion of the surfaces in CNP. The CNP treatment produced a 5-log reduction of the microbial population after 30 to 60 min of immersion. The CNP treatment also performed better than water and sodium carbonate, a compound commonly applied in clean-in-place procedures in the food industry, in removing adherent B. cereus cells from stainless steel cylinders. Therefore, these results suggest that NP synthesized by a new procedure may be used as antimicrobials in the food industry, for example, for the sanitization of utensils that come into contact with foods.     

Part III: the influence of serial repitching of Saccharomyces pastorianus on the production dynamics of some important aroma compounds during the fermentation of barley and gluten‐free buckwheat and quinoa wort

The present paper is the last report of a comprehensive study regarding the influence of the serial repitching of Saccharomyces pastorianus TUM 34/70 on the composition of a barley, buckwheat or quinoa fermentation medium. In particular, it focuses on the production dynamics of important volatile compounds typically associated with the aroma of beer. Samples were taken every 24 h after 11 serial repitchings of a single starter culture, analysed for the particular aroma compound content by distillation followed by gas chromatography with flame ionization detection. The term ‘serial repitching factor’ is used for the first time to support the visual evaluation of the influence of serial repitching. Results showed that the levels of methanol in the quinoa wort fermentation were only slightly higher than in barley and in practical terms independent of successive fermentation. The behaviour of acetaldehyde in quinoa was similar to that in barley. However, there was a final 2‐fold lower production of some important aroma compounds compared with barley and buckwheat and for this reason quinoa cannot be recommended as a gluten‐free substitute to produce a bottom‐fermented beer. Regarding the buckwheat wort fermentation, a 2‐ to 3‐times lower final acetaldehyde content than in barley is desirable, whereas a relatively high methanol content is not desirable. Barley and buckwheat showed comparable sum concentrations and similar overall profiles of some important aroma compounds. From this perspective, buckwheat appears to be a promising substitute for barley as a brewing raw material. The overall conclusions of our comprehensive study (Parts I–III) are that buckwheat shows adequate brewing properties to substitute for barley in the commercial preparation of a bottom‐fermented gluten‐free beer‐like beverage, and yeast can be repitched at least 11 times. In contrast, quinoa in practical terms shows no substitutional potential for barley in beer; however, it has many nutritious advantages, thus the commercial preparation of a unique, bottom‐fermented gluten‐free ‘non‐beer‐like’ beverage – where the yeast could be repitched six times at most – appears feasible. Copyright © 2015 The Institute of Brewing & Distilling     

Combined Application of Antibrowning,Heat Treatment and Modified‐Atmosphere Packaging to Extend the Shelf Life of Fresh‐Cut Lotus Root

This work aimed to determine the effects of different concentrations of antibrowning treatments (that is, distilled water [DW], 1% ascorbic acid [AA], 0.5% chamomile [CM], and 1% AA + 0.5% CM) and heat‐treatment (55 °C for 45 s) combined with packaging under 4 different modified‐atmosphere gas compositions (that is, air, vacuum, 100% CO₂, 50% CO₂/50% N₂) on the quality and microbiological characteristics of fresh‐cut lotus root. The quality characteristics (that is, color, weight loss, texture, pH, polyphenoloxidase activity, and total phenolic content) of the AA + CM‐dipped sample in 100% CO₂ packaging were maintained significantly better than those of the other samples (P < 0.05). The microbiological counts observed in the DW‐dipped sample during storage were higher than those of the AA, CM, and AA + CM samples, and heat‐treatment retarded the microbiological deterioration of fresh‐cut lotus root. Therefore, the results revealed that dipping in an antibrowning treatment (AA + CM), and 100% CO₂ MAP with heat treatment effectively extend the shelf life of fresh‐cut lotus root to 21 d at 5 °C.