Thermal and crystallization characteristics of poly(ethylene terephthalate) with poly(oxybenzoate‐p‐trimethylene terephthalate) copolymer

Poly(ethylene terephthalate) (PET) was blended with two different poly(oxybenzoate‐p‐trimethylene terephthalate) copolymers, designated T28 and T64, with the level of copolymer varying from 1 to 15 wt %. All samples were prepared by solution blending in a 60/40 (by weight) phenol/tetrachloroethane solvent at 50°C. The crystallization behavior of the samples was studied by DSC. The results indicate that both T28 and T64 accelerated the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of PET crystallization rate was most pronounced in the PET/T64 blends with a maximum level at 5 wt % of T64. The melting temperatures for the blends are comparable to that of pure PET. The observed changes in crystallization behavior are explained by the effect of the physical state of the copolyester during PET crystallization as well as the amount of copolymer in the blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1599–1606, 2002     

基于TCN的地铁列车控制方案的研究

本文针对地铁车厢内控制设备分散的问题,设计了基于TCNRTP的地铁列车控制网络系统。采用NS2网络模拟软件构建的虚拟网络环境,编写消息数据传输层协议,通过测试列控网络的通信效率,得出了影响通信效率的因素;通过配置列控通信设备的基本功能和设定装置运行参数达到配置网络化通信的目的。     

策应鄱阳湖生态经济区建设 推动吉安进位赶超绿色崛起

建设鄱阳湖生态经济区是国家从战略全局和长远发展出发作出的一项重大决策。如何主动策应鄱阳湖生态经济区建设,推动吉安进位赶超、跨越发展,是摆在我们各级政府和科技部门面前一项亟待解决的问题。为此,一是要提高认识,统一思想,切实增强策应规划的使命感和责任感;二是要结合实际,突出重点,全面对接鄱阳湖生态经济区规划;三是要加强领导,落实措施,确保吉安进位赶超、绿色崛起取得明显成效。     

Molten salts/ceramic-foam matrix composites by melt infiltration method as energy storage material

A new type of high temperature energy storage material was obtained through the melt infiltration method, using compounding SiC ceramic foam as matrix and Na₂SO₄ as phase change material. The resulting composite material was measured by XRD, SEM, TG-DSC methods. The experimental results indicate that the composite is composed of silicon carbide, sodium sulfate and square quartz, and no chemical reactions occurs between Na₂SO₄ and SiC matrix. Na₂SO₄ has a good bonding with the SiC ceramic foam matrix. As the composite material is characterized by high thermal energy storage density and high thermal conductivity, it is suit for energy storage under high temperature. Funded by the “863” Hi-Tech Research and Development Program of China (2008AA05Z418)     

人力资源管理视角中的假文凭现象及防治对策

从经济学根源上论述了文凭作为衡量人力资本的手段具有理论上的合理性,也具有现实中的无奈性.针对人力资源管理中的＂假文凭＂现象,提出了人力资源管理要从转变用人理念、完善人才考评机制、加强学历管理等方面对＂假文凭＂现象进行有效的防治及采取相应的应对措施.     

Solvent free oxidation of alcohols catalyzed by KMnO4 adsorbed on Kieselguhr

Efficient and selective oxidation of primary and secondary alcohols to the corresponding aldehydes and ketones catalyzed by potassium permanganate supported on Kieselguhr reagent under solvent free conditions are reported.     

A Novel Filtering Based Recursive Estimation Algorithm for Box-Jenkins Systems

International Journal of Control, Automation and Systems - This paper presents a novel filtering based multi-innovation estimation algorithm for output-error autoregressive moving average (i.e.,...     

Reaction mechanism and microstructure evolution of reaction sintered <Emphasis Type="Italic">h</Emphasis>-BN

Hexagonal boron nitride ceramic (h-BN) based on the nitridation of B powders was obtained by reaction sintering method. The effects of sintering temperature on the mechanical properties and microstructure of the resultant products were investigated and the reaction mechanism was discussed. Results showed that the reaction between B and N₂ occurred vigorously at temperatures ranging from 1 000 °C to 1 300 °C, which resulted in the generation of t-BN. When the temperature exceeded 1 450 °C, transformation from t-BN to h-BN began to occur. As the sintering temperature increased, the spherical particles of t-BN gradually transformed into fine sheet particles of h-BN. These particles subsequently displayed a compact arrangement to achieve a more uniform microstructure, thereby increasing the strength.     

Optimization of uncertain acoustic metamaterial with Helmholtz resonators based on interval model

Uncertainties existing in the acoustic metamaterial may strongly affect its unusual properties. Aiming at this actuality, the interval model is introduced to treat with uncertainties existing in the acoustic metamaterial with Helmholtz resonators. Frequency intervals in which the sound intensity transmission coefficients are certainly less than the required value and the effective bulk moduli are certainly negative are defined as conservative approximations. Frequency intervals in which the sound intensity transmission coefficients may be less than the required value and the effective bulk moduli may be negative are defined as unsafe approximations. The proportion of the conservative approximation and the unsafe approximation is defined as an approximate precision. Based on the quantification of uncertainties of the sound intensity transmission coefficients and the negative effective bulk moduli, an optimization model for the interval acoustic metamaterial with Helmholtz resonators is constructed. Numerical results showed that even suffering from effects of interval parameters, unusual properties of the optimized acoustic metamaterial (such as the bandgap of the sound transmission and the negative effective bulk modulus) could be improved.     

On the Survivability of Self-repairing Control System for a Hybrid Underwater Vehicle

A hybrid remotely operated underwater vehicle （HROV） capable of working to the full ocean depth has been developed. In order for the vehicle to achieve a certain survivability level, a self-repairing control system （SRCS） has been designed. It consists of two basic technologies, fault diagnosis and isolation （FDI） and reconfigurable control. For F＇DI, a model-based hierarchical fault diagnosis system is designed for the HROV. Then, control strategies which reconfigure the control system at intervals according to information from the FDI system are presented. Combining the two technologies, it can obtain the fundamental frame of SRCS for the HROV. Considering the hazardous underwater environment at the limiting depth and the hybrid operating modes, an assessment of the HROV＇ s survivability is vitally needed before it enters operational service. This paper presents a new definition of survivability for underwater vehicles and develops a simple survivability model for the SRCS. As a result of survivability assessment for the SRCS, we are able to figure out the survivability of SRCS and make further optimization about it. The methodology developed herein is also applicable to other types of underwater vehicles.