Effect of supports on the redox performance of pyrite cinder in chemical looping combustion

Chemical looping combustion (CLC) is a clean and efficient flame-free combustion technology,which combust the fuels by lattice oxygen from a solid oxygen carrier with inherent CO2 capture.The develop-ment of oxygen carriers with low cost and high redox performance is crucial to the whole efficiency of CLC process.As the solid by-product from the sulfuric acid production,pyrite cinder presented excellent redox performance as an oxygen carrier in CLC process.The main components in pyrite cinder are Fe2O3,CaSO4,Al2O3 and SiO2 in which Fe2O3 is the active component to provide lattice oxygen.In order to sys-tematic investigate the functions of supports (CaSO4,Al2O3 and SiO2) in pyrite cinder,three oxygen car-riers (Fe2O3-CaSO4,Fe2O3-Al2O3 and Fe2O3-SiO2) were prepared and evaluated in this study.The results showed that Fe2O3-CaSO4 displayed high redox activity and cycling stability in the multiple redox cycles.However,both Fe2O3-Al2O3 and Fe2O3-SiO2 experienced serious deactivation during redox reactions.It indicated that the inert Fe-Si solid solution (Fe2SiO4) was formed in the spent Fe2O3-SiO2 sample,which decreased the oxygen carrying capacity of this sample.The XPS results showed that the oxygen species on the surface of Fe2O3-CaSO4 could be fully recovered after the 20 redox cycles.It can be concluded that CaSO4 is the key to the high redox activity and cycling stability of pyrite cinder.     

火力发电厂自动加氧处理系统的研究与应用

针对超(超)临界机组不采用加氧处理,给水系统容易发生流动加速腐蚀(影响安全)、水冷壁结垢速率高(降低锅炉效率)、锅炉酸洗周期短(影响效益)、水冷壁节流孔堵塞(影响安全)、凝结水精处理运行周期短(影响节能减排)等实际问题,通过融合预测控制技术及自适应控制技术,提出了符合现代火电机组加氧工况要求的先进解决方案自动加氧装置.该技术通过研制加氧流量传感器,产生与氧气流量对应的电子信号,将与流量相关的电子信号送到PLC,与流量设定值进行比对,再调节氧气流量调节门,实现加氧量的精准控制,最终实现闭环控制,并能有效减少在稳定工况及升、降负荷过程中凝结水、给水氧量关键参数的波动,控制参数十分平稳,确保了大型火电机组的安全、稳定及高效运行.     

细胞激动素Kinetin合成的改进

介绍了用糠胺与腺嘌呤在催化条件下反应合成细胞激动素kinetin,该法原料易得,反应条件温和,产品收率及纯度都较高。     

Parametrized Maximum Principle Preserving Flux Limiters for High Order Schemes Solving Multi-Dimensional Scalar Hyperbolic Conservation Laws

In this paper, we will extend the strict maximum principle preserving flux limiting technique developed for one dimensional scalar hyperbolic conservation laws to the two-dimensional scalar problems. The parametrized flux limiters and their determination from decoupling maximum principle preserving constraint is presented in a compact way for two-dimensional problems. With the compact fashion that the decoupling is carried out, the technique can be easily applied to high order finite difference and finite volume schemes for multi-dimensional scalar hyperbolic problems. For the two-dimensional problem, the successively defined flux limiters are developed for the multi-stage total-variation-diminishing Runge–Kutta time-discretization to improve the efficiency of computation. The high order schemes with successive flux limiters provide high order approximation and maintain strict maximum principle with mild Courant-Friedrichs-Lewy constraint. Two dimensional numerical evidence is given to demonstrate the capability of the proposed approach.     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

Propylene epoxidation in a microreactor with electric heating

Gas phase propylene epoxidation on gold catalysts has attracted wide attention from industry and academia due to its high selectivity. However, it suffers from low propylene conversion and rapid catalyst deactivation. Experiments showed that propylene conversion could be increased by raising H₂, O₂, or C₃H₆ concentration in the feed, but the feed compositions were within the explosion limit. It was also shown that the activity of the used catalyst could be fully recovered, but the regeneration temperature was 280 °C, much higher than that for reaction. Therefore a microchannel reactor was devised to suppress explosion and was constructed with Fecralloy, to raise the temperature rapidly for catalyst regeneration by electric heating. In two minutes the temperature of the reactor could be raised from 50 to 300 °C. Catalysts were coated on the alloy belt by dip coating, and the performance of the reactor was evaluated under different operating conditions. Results showed that in the microreactor the overall reaction rate was controlled mainly by the intrinsic reaction rate, and also influenced by film diffusion to a certain extent. The deactivated catalyst was regenerated in the microchannel reactor and the activity was fully recovered.     

光学镜头调制传递函数的测试

为了定量、客观、全面地评价光学镜头的像质,介绍了光学镜头调制传递函数的测试。先简要叙述了测试的原理,并给出计算公式;然后介绍了测试步骤,其中包括固定、穿轴、测试中心视场和测试轴外视场;最后介绍了测试时的注意事项,包括对测试工装的要求、对测试平面的要求和正、负轴外视场测试值相差较大时的处理办法。     

Fabrication and optical characterization of poly(2,5‐di‐n‐butoxyphenylene) nanofibril arrays

Anodic aluminum oxide (AAO) membrane can be used as template for the synthesized nanostructures. In this article, we have prepared the AAO membrane by using electrooxidation of aluminum substrate in phosphoric acid, and fabricated poly(2,5‐di‐n‐butoxyphenylene) (BuO–PPP) nanofibril arrays by oxidative coupling polymerization of 1,4‐di‐n‐butoxybenzene (DBB) within the pores of the AAO template membrane. The detailed molecular structure of the polymer nanofibrils was characterized by using infrared and ¹H nuclear magnetic resonance spectra, and estimated to consist of almost equal fractions of 1,4‐ and 1,3‐ linkages. We have used transmission electron microscopy, scanning electron microscopy, and atom force microscopy to confirm the morphologies and images of the AAO template membrane and the fabricated nanometer scale of BuO–PPP nanofibril arrays. The experimental results demonstrated that the pores of the AAO membrane were regular and uniform, and parallel each other, and the BuO–PPP chains in the narrowest template‐synthesized nanofibrils were oriented parallel to the porous axes of the AAO membrane and perpendicular to the surface of the aluminum substrate. The polymer chain orientation was partially responsible for the enhanced conductivity. The ultraviolet absorption spectrum of the BuO–PPP nanofibril arrays shown that the polymer contains a better extended π‐conjugation system along poly‐(p‐phenylene) backbone, which resulted in longer wavelength shift of the absorption band, the absorption maxima were located at 258 nm (E₁ absorption band) and 332 nm (E₂ absorption band), respectively. Photoluminescence spectrum of the BuO–PPP nanofibril arrays exhibited a blue emission. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 425–430, 2004     

基于大数据背景下的企业生态系统架构研究

随着全球网络技术与移动通信设备的融合发展,“大数据”时代已经引起社会各界的重点关注。苹果、三星、华为、IBM、微软、腾讯等国际知名企业都开始建构出“大数据”时代的企业生态系统。本文将对“大数据”时代的企业生态系统的演化和建构进行深入分析。     

水基Fe3O4磁流体的制备工艺研究

用共沉淀法制备Fe3O4磁流体,总结出用十二烷基磺酸钠与聚乙二醇作为表面活性剂制备水基磁流体的合适条件:(1)反应温度为室温或不高于35℃;(2)表面活性剂十二烷基磺酸钠的最佳用量为0.0030～0.0040 g/80 mL;(3)第一次包裹的最佳pH为9～10;(4)聚乙二醇作为第二次包裹的表面活剂时,体系最佳温度为40℃左右;(5)表面活性剂聚乙二醇的最佳用量为0.0050～0.0060 g/80 mL。通过实验制得了能稳定存在180 d的水基磁流体。并用透射电镜、红外光谱、分光光度计、古埃磁天平等进行了初步表征。