Fabrication of Titanium Aluminides via Powder-Cored Wire Arc Additive Manufacturing: Microstructural and Mechanical Characterization

Herein, an innovative powder-cored wire arc additive manufacturing (PC-WAAM) process is proposed to fabricate γ-TiAl thin-walled intermetallic alloy. The metallography, phase composition, and mechanical properties at different thin-wall locations are characterized. The results show that the alternatively distributed layer-like microstructure composed of α₂ (Ti₃Al) and γ (TiAl) phases is obtained along the building direction. The content of α₂ phase exhibits the tendency of decreasing from the bottom to top region. This unique microstructure characteristic is closely related to the typical thermal cycling history during deposition. Moreover, the tensile strength and microhardness of the top region are lower than the middle and bottom region. In general, the current PC-WAAM technique shows promising capability of fabricating γ-TiAl intermetallic alloy with low cost. This work becomes a valuable reference for understanding the evolution mechanism of microstructure and paves the way for the flexible and customized additive manufacturing of γ-TiAl alloy.     

一种快速自适应谱估计算法

通过对梯度格型快速自适应算法的研究,结合最大熵谱外推目前存在的缺点,将梯度格型算法应用于最大熵谱外推中,并将其与伯格算法进行了比较。     

Experimental study on fitness of one-piece casting osseointegrated implant frameworks with relation to fixture abutment positions

An experiment on fitness of one-piece casting osseointegrated implant frameworks was performed among three fixture abument positions where other conditions were controlled. The result revealed that there was statistically significant differences in dimensional change among the three fixture abument positions. In terms of the relation between abument position and fitness, the more backward the abument position was, the worse the osseointegrated framework fitness was. The frameworks showed deformations in "arch form" and "warp" in three dimensions.     

CHV190系列变频器在永磁同步电机驱动矿井提升机中的应用

本文分析了矿井提升机的运行特点,详细阐述了英威腾CHV190系列起重提升专用变频器用于永磁同步电动机驱动的节能型矿井提升机的选型配置原则,最后介绍了应用现场的调试步骤及注意事项。     

On the definition of the intuitionistic fuzzy subgroups

In this paper, a new kind of intuitionistic fuzzy subgroup theory, which is different from that of Ma, Zhan and Davvaz (2008) [22], [23], is presented. First, based on the concept of cut sets on intuitionistic fuzzy sets, we establish the neighborhood relations between a fuzzy point $x_a$ and an intuitionistic fuzzy set $A$. Then we give the definitions of the grades of $x_a$ belonging to $A$, $x_a$ quasi-coincident with $A$, $x_a$ belonging to and quasi-coincident with $A$ and $x_a$ belonging to or quasi-coincident with $A$, respectively. Second, by applying the 3-valued Lukasiewicz implication, we give the definition of $(\alpha ,\beta )$-intuitionistic fuzzy subgroups of a group $G$ for $\alpha ,\beta \in \{\in ,q,\in \wedge q,\in \vee q\}$, and we show that, in 16 kinds of $(\alpha ,\beta )$-intuitionistic fuzzy subgroups, the significant ones are the $(\in ,\in )$-intuitionistic fuzzy subgroup, the $(\in ,\in \vee q)$-intuitionistic fuzzy subgroup and the $(\in \wedge q,\in )$-intuitionistic fuzzy subgroup. We also show that $A$ is a $(\in ,\in )$-intuitionistic fuzzy subgroup of $G$ if and only if, for any $a\in (0,1]$, the cut set $A_a$ of $A$ is a 3-valued fuzzy subgroup of $G$, and $A$ is a $(\in ,\in \vee q)$-intuitionistic fuzzy subgroup (or $(\in ,\in \vee q)$-intuitionistic fuzzy subgroup) of $G$ if and only if, for any $a\in (0,0.5]$(or for any $a\in (0.5,1]$), the cut set $A_a$ of $A$ is a 3-valued fuzzy subgroup of $G$. At last, we generalize the $(\in ,\in )$-intuitionistic fuzzy subgroup, $(\in ,\in \vee q)$-intuitionistic fuzzy subgroup and $(\in \wedge q,\in )$-intuitionistic fuzzy subgroup to intuitionistic fuzzy subgroups with thresholds, i.e., $(s,t]$-intuitionistic fuzzy subgroups. We show that $A$ is a $(s,t]$-intuitionistic fuzzy subgroup of $G$ if and only if, for any $a\in (s,t]$, the cut set $A_a$ of $A$ is a 3-valued fuzzy subgroup of $G$. We also characterize the $(s,t]$-intuitionistic fuzzy subgroup by the neighborhood relations between a fuzzy point $x_a$ and an intuitionistic fuzzy set $A$.     

Scalable multi-variate analytics of seismic and satellite-based observational data

Over the past few years, large human populations around the world have been affected by an increase in significant seismic activities. For both conducting basic scientific research and for setting critical government policies, it is crucial to be able to explore and understand seismic and geographical information obtained through all scientific instruments. In this work, we present a visual analytics system that enables explorative visualization of seismic data together with satellite-based observational data, and introduce a suite of visual analytical tools. Seismic and satellite data are integrated temporally and spatially. Users can select temporal ;and spatial ranges to zoom in on specific seismic events, as well as to inspect changes both during and after the events. Tools for designing high dimensional transfer functions have been developed to enable efficient and intuitive comprehension of the multi-modal data. Spread-sheet style comparisons are used for data drill-down as well as presentation. Comparisons between distinct seismic events are also provided for characterizing event-wise differences. Our system has been designed for scalability in terms of data size, complexity (i.e. number of modalities), and varying form factors of display environments.     

高速网络Fast TCP拥塞控制算法的改进

随着网络技术的飞速发展和接入性能的不断提高,如今全世界的互联主干网络呈现出一种高速网络的特性。在这种网络特性下,传统网络中的TCP拥塞控制协议已经开始显现出不适应性,发现了FAST TCP协议中＂持续拥塞＂的形成机制,建立了数学模型来准确的描述＂持续拥塞＂所导致数据流之间带宽分配不公平的问题,进一步利用优先服务队列的方法解决了FAST TCP在网络中的持续拥塞现象。     

基于改进傅里叶描绘子的CBIR系统

在现有的基于傅里叶描绘子的CBIR系统中,为了提高检索速度,一般需要舍去物体轮廓经傅里叶变换后的大部分高频分量.当物体轮廓在细节部分具有较高能量时,此方法不具备有效性.为尽可能保证检索准确率并兼顾检索速度,在原有傅里叶描绘子上进行扩展,避免直接舍去高频分量,引入Fisher判别分析法将描绘子映射到子空间进行降维,并保证...