A Newly Developed Non, Destructive Tritium Measurement Technique and Its Application to V-4Cr-4Ti Alloy

A non-destructive and in-situ technique for the measurement of tritium in materials, namely β-ray-induced X-ray spectrometry （BIXS）, has been developed recently. In the present study a V-4Cr-4Ti alloy was pre-heated at 1000℃ for 2 h to form a recrystallization structure before the tritium absorption experiments were conducted. Firstly the hydrogen isotope gas was charazterized by means of a quadrupole mass spectrometer （QMS） and a small-sized ionization chamber. Then hydrogen isotope absorption tests of V-4Cr-4Ti alloy were performed at 400 ℃ and the atomic concentration of hydrogen isotope in V-4Cr-4Ti alloy was estimated as 0.17% with a tritium content of approximately 2.5 ppm. Experimental results indicate that BIXS is a quite useful tool for quantitatively measuring the tritium content and tritium distribution in the surface layers of vanadium alloys and no strong trapping effects of tritium exist in the pre-heated V-4Cr-4Ti alloy.     

重庆温泉寺及其寺庙园林史略

本文以重庆温泉寺庙园林为例,说明现在重庆园林布局仍以寺庙建筑为中心,组成严整的东西对称格局,其建造充分体现了“天人合一”的思想境界和“道”的自然无为的原则。     

The oxidation of two ternary Ni-Cu-10 at.% Al alloys in 1 atm of pure O2 at 800-900 °C

The oxidation of the ternary alloys Ni-45Cu-10Al and Ni-30Cu-10Al has been studied at 800-900 °C under 1 atm O₂. The presence of 10 at.% Al reduces significantly the oxidation rate of the corresponding Cu-Ni alloys during the initial oxidation stages, even before the establishment of a complete Al₂O₃ layer. The weight of individual sample of the two ternary Ni-Cu-10Al alloys at 800 °C increases more rapidly than at 900 °C during the initial oxidation stage. As oxidation proceeds, the weight gain at 800 °C slows down to a degree that the total weight gain after 24 h oxidation at 800 °C is less than that at 900 °C. Due to a faster formation of the Al₂O₃ layer, which suppresses earlier the further oxidation of Cu and Ni, the external region of the scales grown on Ni-45Cu-10Al contain much less Cu and Ni oxides than those grown on Ni-30Cu-10Al. The transition from the internal oxidation to the selective external oxidation of the most reactive component Al in Ni-Cu-Al alloys is favored by higher values of the Al content, of temperature and of the Cu/Ni ratio.     

日本锰质合金生产与锰矿石的消耗

本文全面介绍了日本近年特别是1990年锰矿石进口量和锰铁合金的生产情况。同时还介绍了锰质合金、电解金属锰和电解二氧化锰的进出口情况。日本1990年进口锰矿石143万t,高碳锰铁4.6万t,中、低碳锰铁0.3万t,硅锰21.8t。还列出了进口矿石和硬质合金来源国数量。此外,还介绍了日本重点锰质合金厂的产品。     

筛查基因突变的新技术——循环双脱氧指纹图谱法及其应用

建立了适用于大批量标本基因突变筛查的双脱氧指纹图谱法即ｄｄＦ。该技术民测定ＤＮＡ序列的双脱氧末端终止法及ＳＳＣＰ二者长处于一身，即只作一个双脱氧末端终止反应，然后将反应产物在与ＳＳＣＰ相同的电泳条件下进行聚丙烯酰胺凝胶电泳，这样有突变的样品不会漏检，阳性检出率高达１００％。     

朗江电站水库洪水调度探讨

文章根据朗江水库工程实际情况,介绍了水库洪水成因及特性,通过洪水设计、调洪演算计算分析,指出了闸门操作程序,对"以峰控制"的中、小型水库的洪水调度具有一定的参考价值。     

残余应力对55SiMnVB弹簧钢疲劳性能的影响

研究了５５ＳｉＭｎＶＢ弹簧钢板疲劳断口特征及裂扩展过程。结果表明，喷丸强化在表层产生的残余压应力可明显提高疲劳抗力，增强裂纹闭合效应，降低裂纹扩展速度。     

鄂北地区气测现场解释评价研究

鄂尔多斯盆地鄂北地区现场气测录井由于受多种因素影响,解释符合率相对较低。针对这一问题,在探讨影响气测录井显示因素、识别气测异常的基础上,分析了消除影响因素的途径和校正公式,建立了随钻全烃与全脱全烃的关系式,论述了地面和地层含气量计算方法。在初步评价气显示性质条件下,经统计分析得出了应用4参数——峰面积、校正全烃值、全烃计算值和地层含气量加权分值的解释评价标准,为鄂北地区气测录井解释评价和产能的初步预测探索了一种新模式,不但解决了鄂北地区气测解释符合率低的问题,而且对于深入开展气测录井参数与油气解释评价研究具有一定的参考意义。     

厂商动态

厂商动态３Ｃｏｍ公司与Ｓｉｅｍｅｎｓ公司携手合作３Ｃｏｍ公司和Ｓｉｅｍｅｎｓ公司于近日宣布，两家公司已结成战略联盟，以适应集成电话数据网络市场日新月异的发展．两家公司将首先保证Ｓｉｅｍｅｎｓ公司的Ｈｉｃｏｍ电信系统与３Ｃｏｍ公司的企业数据网络系统可以...     

气凝胶──一种结构可控的新型功能材料

气凝胶是一种结构可控的新型轻质纳米多孔性非晶固态材料，具有许多特殊性质，因而蕴藏着广阔的应用前景。本文综述了气凝胶材料的制备方法、结构控制原理、性质和各种可能的应用。