稀燃车用催化剂的研究进展

稀燃车用催化剂是汽车尾气净化催化剂今后发展的方向，在稀燃条件下如何处理NOx是稀燃车用催化剂面临的巨大挑战。本文详细地评述了近年来国内外在这方面的研究工作，包括选择催化还原催化剂、存储还原催化剂和组合多功能催化剂的研究进展。     

国外现代铝带冷轧机和国产先进冷轧机

介绍了国外现代化铝带冷轧机的特点和典型轧机及国内铝带冷轧机的发展。     

亚氨基二乙酸的分析探讨

试样在酸性溶液中 ,加入亚硝酸钠进行亚硝化 ,从而测定出亚氨基二乙酸的含量。方法简便、实用、检出限低 ,适用于不同工艺路线生产的亚氨基二乙酸的测定 ,具有较高的精密度及准确度     

Acrylonitrile-based copolymer membranes containing reactive groups: Surface modification by the immobilization of biomacromolecules

Asymmetric membranes fabricated from poly(acrylonitrile-co-maleic acid) (PANCMA) were immobilized with heparin and/or insulin to improve their surface properties. These biomacromolecule-immobilized PANCMA membranes were prepared by the amination of the membrane surface with ethylenediamine, followed by the reaction of the amino groups with heparin and/or insulin in the presence of 1-ethyl-3-(3-dimethyl amidopropyl) carbodiimide. The surface-modified membranes were analyzed by X-ray photoelectron spectroscopy to confirm the immobilization of the biomacromolecules. Morphological changes on the membrane surface and in the cross section were characterized by scanning electron microscopy. The surface hydrophilicity and hemocompatibility of the studied membranes were evaluated on the basis of water contact angle, platelets adhesion and cell attachment measurements. It was found that, after the immobilization of the biomacromolecules, the water contact angle and the amount of adhered platelets and macrophages on the membrane decreased significantly when compared with the nascent ones, indicating the improvement of surface hydrophilicity. Furthermore, the heparin immobilized membrane showed the best hemocompatibility among the corresponding membranes studied.     

流程生产的可视化整合和多目标优化软件

针对现代企业所面临的挑战，开发了一个软件系统可以根据市场的动态变化和企业内部的设备状况，优化设备配置、优化原料和产品方案。采用可视化形式实施仿真运行和经济效益分析预测。     

分子筛干燥器运行问题处理

分析分子筛干燥器运行出现的问题及原因，介绍问题处理经过及解决办法。     

The effect of the framework structure on the chemical properties of the vanadium oxide species incorporated within zeolites

V-silicalite catalysts (VS-1 and VS-2) prepared by hydrothermal synthesis have been studied by ESR, XAFS (XANES and EXAFS) and photoluminescence spectroscopy. The in situ characterization of these V-silicalites shows that vanadium is present within the zeolitic framework as a highly dispersed tetrahedrally coordinated V-oxides, VO₄ unit, having a short V=O bond length. Photoluminescence spectroscopy in static and dynamic mode, as well as XAFS studies allow to detect in the V-silicalites different V species than that present in V-HMS or V/SiO₂, in terms of V=O bond length, vibrational energy, bond angle and lifetime of the excited triplet state. It is suggested that the combined contribution of the neighboring Si---OH group attached to the VO₄ unit and the zeolitic rigid framework structure of V-silicalites cause a more significant and pronounced effect on the chemical properties of the VO₄ unit than the flexible structure of V-HMS or V/SiO₂. Moreover, the dynamic quenching of the phosphorescence by the addition of reactant molecules such as NO or propane indicates that the V species in the excited triplet state can be expected to be the active sites for the photocatalytic reactions.     

FPGA与ARM的无人机陀螺仪数据接口设计

在无人机系统与地面站通信过程中,机载陀螺仪姿态数据的高速产生与外部相对低速的无线数据模块传输的矛盾日益突出,严重制约着无人机的发展。针对这一问题,采用FPGA FIFO作为高速数据缓冲,提出一种基于FPGA内建FIFO的无人机陀螺仪前级通信接口。通过高速异步FIFO缓冲,将无人机陀螺仪姿态数据经由FPGA准确无误地发送给地面站,显著提高数据传输质量,实现了高速芯片与低速设备之间的通信。整个设计在实际应用中效果良好,数据稳定可靠,满足了低误码率与高稳定性的要求,以及无人机与地面站高速通信的需求,有着广阔的市场应用前景。     

高效节能热泵错流多效蒸发复杂系统

为了大幅降低错流多效蒸发过程的能耗,首次将蒸汽喷射式热泵技术、冷凝水闪蒸和溶液闪蒸等3种节能措施同时运用到错流多效蒸发系统中,并建立了用矩阵方程描述的该系统的数学模型。模型具有很强的通用性,可实现热泵在任意效抽汽的功能,可简化为只有其中若干种节能措施组合或无上述节能措施的错流、并流、逆流多效蒸发系统的模型。在满足约束条件的前提下,模型存在最佳的热泵喷射系数和抽汽位置,同时采用上述3种节能措施且在最佳条件下模型是高效节能的。浓缩氢氧化钠溶液的热泵错流五效蒸发系统的模拟结果表明,当热泵的喷射系数为0.15、抽汽位置在第2效,采用冷凝水闪蒸和溶液闪蒸时系统节省的生蒸汽消耗量高达32.51%。     

丙烯酸酯改性双环戊二烯酚型环氧树脂及其性能研究

通过FT－IR光谱表征了丙烯酸酯改性的DCPD酚型环氧树脂／DDM体系结构，并通过测定改性体系的凝胶时间和分析凝胶时间的影响因素，研究了该体系的反应特性，同时，对改造前后DCPD酚型环氧树脂体系的性能做了分析。