A BiCMOS dynamic carry lookahead adder circuit for VLSIimplementation of high-speed arithmetic unit

A BiCMOS dynamic carry lookahead circuit that is free from race problems is presented. A 16 b full-adder test circuit, which has been designed based on a 2 μm BiCMOS technology, shows a more than five times improvement in speed as compared to the CMOS Manchester carry lookahead (MCLA) circuit. The speed advantage of the BiCMOS dynamic carry lookahead circuit is even greater in a 32- or 64-b adder     

Directly Compressible Acetaminophen Compositions Prepared by Fluidized-Bed Granulation

Polyvinylpyrrolidone (PVP) in aqueous solution was used as a binding agent in a fluidized-bed system to agglomerate acetaminophen powder into directly compressible granules. It was found that a minimal amount of 5% w/w PVP in a concentration of 7.5% w/v or less was needed to produce granules with an acceptable flow and the corresponding tablets having enough hardness without capping. There was a strong correlation between the time for 80% dissolved (T₈₀) and the logarithm of granule volume-surface mean diameter. A directly compressible acetaminophen composition to manufacture tablets having a T₈₀ value less than 30 min can be prepared simply by adding an appropriate amount of disintegrant (crospovidone, sodium starch glycolate, or pregelatinized starch) to the agglomerated granules.     

Multiple negative-differential-resistance (MNDR) phenomena of ametal-insulator-semiconductor-insulator-metal (MISIM)-like structurewith step-compositioned InxGa1-xAs quantum wells

In this paper, a new multiple negative-differential-resistance (MNDR) device based on a metal-insulator-semiconductor-insulator-metal (MISIM)-like structure with step-compositional In_xGa_1-x As quantum wells has been fabricated and demonstrated. The interesting MNDR phenomena are found in the current-voltage (I-V) characteristics of this device. At room temperature, the triple switching behaviours and quadruple stable operation states are obtained. In addition, the sixfold switching behaviors and a staircase-shaped I-V characteristic are observed at -105°C. A sequential carrier accumulation at InGaAs subwells and the potential lowering process are used to qualitatively explain the interesting MNDR phenomena. From the experimental results, it is shown that the studied device has good potential in multiple-valued logic applications     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

Implementation of media processors

Conventional standard processors do not correspond well to the characteristics of multimedia signal processor algorithms. Therefore, special architectural approaches are necessary for multimedia processors to deliver the required high processing power with efficient use of hardware resources. Programmable approaches offer a high degree of flexibility. In order to attain multimedia signal processor performance, architectural strategies for programmable processors are based on parallelization and adaptation principles. The future multimedia signal processor implementation hinges upon an optimal trade-off between the two design spaces, which can be effectively addressed by a codesign approach     

WC对Cu/WC_P复合材料性能及组织的影响

通过ＷＣ含量对ＷＣ／Ｃｕ复合材料性能的影响，确定了冷压－烧结法制备Ｃｕ／ＷＣ材料的适宜ＷＣ含量为１０ｖｏｌ％左右。并就ＷＣ对该材料组织和再结晶行为的影响进行了有益的探讨。     

氧化铝/锌合金复合材料界面的SEM观察

利用挤压铸造制备氧化铝／锌合金复合材料，在扫描电镜（ＳＥＭ）上观察复合材料的界面。结果表明，在复合材料中纤维与基体间存在致密界面层，合金元素通过适当的化学反应可改善纤维与基体间的结合；在凝固过程中，纤维／基体界面上的硅在共晶体的共生生长过程中起了领先相作用，导致复合材料的共晶转变是由铝硅共晶转变和锌铝共晶转变两者组成。     

Design of finite-length metal-clad optical waveguide polarizer

The performance of optical metal-clad waveguide polarizers is analyzed in this paper with a view to optimizing the extinction ratio, a condition for which power of the TM mode is completely attenuated is identified here. In general, such a condition corresponding to an infinitely high extinction ratio can be met for a wide range of buffer layer thicknesses by selection of metal film thickness and polarizer length. When a very thick (e.g., semi-infinitely thick) metal film is used, the aforementioned condition can be met with a properly chosen buffer layer thickness and polarizer length. The numerical results show that all the polarizers designed here for realization of infinitely high extinction ratios have either quite low or reasonably acceptable attenuations for the TE mode     

Analysis of Combined Systems of Two Endoreversible Engines

A single endoreversible engine can operate as a cooler, a true heat engine, a heat pump, or a refrigerator. We investigate how many different modes of operation a combined system of two endoreversible engines may display. Special attention is paid to the independent combined system which neither consumes nor supplies power.     

Superconducting control for surge currents

Systems designed to use superconductors to limit fault currents in power grids are undergoing testing. The authors describe superconducting fault current limiters (SCFCL) which may be categorised into resistive or shielded core types. The features and operation of each type of device are outlined. Both the shielded-core and resistive types of SCFCL use the same amount of superconductor material to achieve a given limitation behavior. This is because the rated power per volume of conductor is determined by the product of fault-induced field and critical current, which is the same for both devices, assuming the same type of superconducting material is employed. The shielded-core limiter works only with AC currents and is much larger and heavier than the resistive SCFCL. While there is only one large program left in the low-temperature type of SCFCL, more than 10 major projects are under way worldwide on the high-temperature type of device. The main reason is the lower HTS cooling cost