ALUM SHALE BITUMEN MATURATION AND MIGRATION: IMPLICATIONS FOR GOTLAND'S OIL

Thermal maturation of Swedish Alum Shale kerogen and bitumen has been determined from core samples from Eastern and Central Sweden. In samples from Eastern Sweden (Öland and Gotland), the kerogen and bitumen are thermally immature with respect to petroleum generation. In some areas of Central Sweden (Närke, ÖstergÖtland, and Kinnekulle in VästergÖtland), the kerogen is immature, whereas the bitumen is marginally mature to mature. In other areas of Central Sweden (Halleberg-Hunneberg in VästergÖtland), the kerogen is supermature and the bitumen mature. This suggests that bitumen from a mature source-rock has migrated into the Alum Shales of Central Sweden. Migration in Central Sweden is further evidenced by the occurrence of obviously-migrated bituments in vugs and voids in the organicpoor Ordovician limestone overlying the Alum Shale in Central Sweden, and in concretions within the Alum Shale itself. Based on biomarker distributions of extracted bitumen, Alum Shale kerogen pyrolysate and obviously-migrated oils, and the fact that the Alum Shale in most of the areas studied is the only petroleum source-rock extant, it is suggested that the migrated bitumen in Central Sweden is from the Alum Shale itself. Bitumen has migrated from areas where the Alum Shale is in close proxmity to Permo-Carboniferous intrusions, such as Halleberg-Hunneberg, into nearby areas such as Närke and ÖstergÖtland, where there is no evidence of intrusion and the indigenous organic matter is thermally immature. Other areas, where Alum Shales were associated with intrusions and consequently sourced oil, may have been eroded away. There are producing wells on the island of Gotland, where the Alum Shale is also thermally immature. It is therefore assumed that heating which was responsible for generating Gotland's oil was very localized (such as by an intrusion) or that the oil has migrated from a thermally moremature, distant area. On the basis of reservoir rock porosity, and the fact that the Alum Shale of Gotland contains no migrated component, localized heating is favored.     

Scrubbing Hydrogen Sulfide from Gases. A Rational Approach

Worsening of the environmental situation in many regions of Russia in recent decades is to a great degree due to production and refining of oil and gas with a high hydrogen sulfide content. Industrial methods of utilization of hydrogen sulfide are extremely irrational: it is either burned in flares or used for production of sulfur whose quality and quantity pose new problems related to its use.     

三维Fuzzy数字拓扑及应用(Ⅰ)

本文引入L-,l-连通度的概念,把Rosenfeld等人建立的三维数字拓扑模糊化;并在三维地震处理中找到了它的应用模型.     

TEM study of PLZT ceramics

The microscopic structures of PLZT(7.9/70/30 and x/65/35, x = 7 or 8) ceramics were studied by means of transmission electron microscopy. The presence of micro-regions in PLZTs was first verfied.     

Operation of an experimental facility for fabrication of fuel elements and fuel assemblies of the bor-60 containing vibrocompacted fuel

Translated from Atomnaya Énergiya, Vol. 67, No. 5, pp. 320–323, November, 1989.     

An empirical formula for the prediction of rain attenuation infrequency range 0.6 - 100 GHz

An empirical formula for calculating the extinction cross section (ECS) by raindrops over a broad frequency range is first derived based on extensive calculations made on a widely varying in mean radius of modified Pruppacher and Pitter (MPP) raindrop models ranging from 0.25 to 3.5 mm. The expansion coefficients in the empirical formula are determined by least-squares curve fitting of numerical data obtained by the volume integral equation formulation (VIEF). The formula satisfies the frequency and raindrop size dependence. Numerical results obtained from the empirical formula for calculating the ECS are generally in good agreement with those calculated by the VIEF for raindrops with mean radius varying from 0.25 to 3.5 mm in the frequency range from 0.6 to 100 GHz. The average error in the ECS is less than 10%. The formula thus provides a simple and inexpensive method for calculating the ECS of raindrops, which otherwise requires complicated and expensive methods of calculation. By implementing this empirical formula of ECS into the rain attenuation equation, a new numerically empirical formula for calculating the specific rain attenuation is also proposed. The validity of the empirical formula for calculating the specific rain attenuation is also checked by comparing the obtained results of specific rain attenuation with those obtained from Li et al.'s (1995) solution, Yeo et al.'s (1993) measurement, and Olsen et al.'s (1978) power-law equation     

The effect of large strains on ageing of a filled elastomer

Strain endurance experiments on a filled elastomer were performed at several temperatures. It was found that superimposed prestraining accelerated the ageing process. This process was caused by microstructural changes in the elastomer. In order to evaluate the mechanical properties of a filled elastomer it is necessary to take into consideration not only the ageing effects but also the loading history.     

A new technique for on-line and off-line high speed computation

A novel technique for both online and offline computation is presented. With this technique, a reconstruction analysis in elementary particle physics, otherwise prohibitively long, has been accomplished. It will be used online in an upcoming Fermilab experiment to reconstruct more than 100000 events per second and to trigger on the basis of that information. The technique delivers 40 gigaoperations per second, has a bandwidth on the order of gigabytes per second, and has a modest cost. An overview of the program, details of the system, and performance measurements are presented     

Analysis of the Safety of the Burial Grounds of Decontamination Waste of Chernobyl Origin in the Territory of Belarus

Unsatisfactory conditions of storage of decontamination waste (DW) in the storages formed in the territory of Belarus after the Chernobyl accident require the evaluation of the level of protection of the environment and population. The potential hazard of the decontamination waste burial grounds (DWBGs) has been evaluated based on the use of a generalized multichamber model that was verified by comparing the calculation results and the results obtained by the American (GW SCREEN) model. The characteristics of the 24 largest and most hazardous DWBGs are given and the evaluations of their safety are presented. The zones of influence of these storages, whose size varies from 100 to 330 m, have been determined. The reliability of the prediction evaluation of a possible hazardous radioactive contamination of water near the storages has been verified using the Dudichi DWBG as an example.     

A study on time schemes for DRBEM analysis of elastic impact wave

 The precise integration and differential quadrature methods are two new unconditionally stable numerical schemes to approximate time derivative with more than the second order accuracy. Recent studies showed that compared with the Houbolt and Newmark methods, they produced more accurate solutions with large time step for the problems where response is primarily dominated by low and intermediate frequency modes. This paper aims to investigate these time schemes in the context of the dual reciprocity BEM (DRBEM) formulation of various shock-excited scalar elastic wave problems, where high modes have important affect on traction response. The Houbolt method was widely recommended in many literatures for such DRBEM dynamic formulations. However, this study found that the damped Newmark algorithm was the most efficient and accurate for impact traction analysis in conjunction with the DRBEM. The precise integration and differential quadrature methods are shown inapplicable for such shock-excited problems due to the absence of numerical damping. On the other hand, we also found that to achieve the same order of accuracy, the differential quadrature method required much less computing effort than the precise integration method due to the use of the Bartels–Stewart algorithm solving the resulting Lyapunov matrix analogization equation. Received 6 November 2000