Non-Isothermal crystallization of isotactic polypropylene in dotriacontane. I: Effects of dilution,cooling rate,and nucleating agent addition on overall crystallization kinetics

The overall non-isothermal crystallization kinetics for nucleated and non-nucleated isotactic polypropylene (iPP) in dotriacontane systems was investigated. Adipic acid was used as the nucleating agent. Crystallization peak temperature was determined via differential scanning calorimetry as a function of the experimentally controlled variables iPP concentration, cooling rate, and nucleating agent concentration. The influence of these variables on crystallization mechanism and spherulitic structure as implied by the Ozawa and Ziabicki analyses was determined. The non-isothermal crystallization kinetics presented here are the first for iPP-diluent systems with and without nucleating agent.     

Transformation of β-Ni(OH)2 to NiO nano-sheets via surface nanocrystalline zirconia coating: Shape and size retention

Shape and size of the synthesized NiO nano-sheets were retained during transformation of sheet-like β-Ni(OH)₂ to NiO at elevated temperatures via nano-sized zirconia coating on the surface of β-Ni(OH)₂. The average grain size was 6.42 nm after 600 °C treatment and slightly increased to 10 nm after 1000 °C treatment, showing effective sintering retardation between NiO nano-sheets. The excellent thermal stability revealed potential application at elevated temperatures, especially for high temperature catalysts and solid-state electrochemical devices.     

铟（Ⅲ）－钼酸铵－罗丹明B显色反应体系的研究及其应用

铟（Ⅲ）与钼酸铵和罗丹明Ｂ在ＰＶＡ存在下的酸性水溶液中形成离子缔合物而产生显色反应，该体系的灵敏度高，摩尔吸光系数ε＝２．４４×１０５Ｌ·ｍｏｌ－１ｃｍ－１，离子缔合物稳定性好，至少稳定４８ｈ。研究了显色体系的光度特性和３０多种共存离子的影响，该法应用于纯锡中痕量铟的测定，结果满意。     

Permanent jet formation in beds of particulate solids

The simple criterion proposed by Chandnani and Epstein (1984, 1986) for stable spouting, d_or/d_p ≤ 25.4, is shown to give a good separation between gas-solid systems which form permanent jets and those that bubble, for a wide range of experimental data reported in the literature. The criterion is suggested as a necessary but not sufficient condition for permanent jet formation in fluidized, spout-fluid and spouted beds.     

PVC／PU合金的制备与研究

叙述了选择混炼型聚氨酯(PU)与分子量适中的Ⅱ型聚氯乙烯(PVC)树脂制备PVC/PU合金的过程,讨论了PVC/PU共混比、填充剂、硫化体系、共混工艺等因素对PVC/PU合金性能的影响。结果表明:选择PVC/PU=60/40(质量比),硫化剂TD15份,白炭黑30份,混炼温度140—160℃,可制得性能优良的PVC/PU合金。动态力学性能实验显示了PVC/PU合金有较好的相容性。     

超临界流体技术应用研究

超临界流体技术具有许多传统技术所没有的快速，高效，低能耗，污染少等优点，在材料制备，医药工业，生物工程，食物，环境，化工等许多方面展现了广阔的应用前景。综述了其在萃取，材料制备和作为反应介质等方面的应用。     

Fabricating Water-Insoluble Polyelectrolyte into Multilayers with Layer-by-layer Self-assembly

Summary A water insoluble azo-containing polyelectrolyte (PEAPB6P-AC) was successfully fabricated into multilayer films based on the layer-by-layer adsorption technique by using N, N-dimethylformamide (DMF) as the assembling media. The multilayer growth and structure were studied with UV-vis spectroscopy, and the multilayer surface were imaged with Atomic Force Microscopy and compared with that fabricated in water. The results show that assembling PEAPB6P-AC in DMF can effectively eliminate the hydrophobic aggregation of the azo units and consequently results in a much smoother multilayer surface than that fabricated in water. This improvement to the layer-by-layer adsorption technique, which can avoid some major difficulties faced when assembling hydrophobic polyelectrolytes in aqueous solutions, seems to be a versatile way to fabricate high quality multilayer films when using the hydrophobic even water-insoluble polyelectrolytes as assembling units.     

企业核心竞争力关键要素——质量

介绍了如何体现产品质量及如何控制产品质量。     

PARAMETER ESTIMATION IN EXPONENTIAL MODELS

Abstract. In this paper the problems of parameter estimation and order determination of an exponential (EX) model are studied in the time domain. In order to estimate the parameters, the parameter equations of an EX model are given in terms of the autocorrelation function, which is similar to the Yule-Walker equations of an autoregressive moving-average model. Estimates of parameters are obtained with the aid of the parameter equations and theorems are proved relating the convergence rate and asymptotic distribution of the estimates. We present two kinds of methods for estimating the order and prove that the estimates of the order are consistent.     

C-19 diacid-based polyamides

The preparation and properties of polyamide hot-melt adhesives derived from Koch C-19 diacid are described. They are comparable to those of commercial C-36 dimer acid-based polyamides for bonding leather and metals and somewhat superior to those of polyamides made from C-19 diacid derived from a hydroformylation process. Presented at the AOCS annual meeting, Toronto, May 1982.