Modelling the effects of dam removal on migratory walleye (Sander vitreus) early life‐history stages

Many dams in the USA have outlived their intended purpose and an increasing number are being considered for removal. Yet, quantitative studies of the potential physical, biological and ecological responses are needed to assess dam removal decisions. In this paper, the responses of migratory walleye (Sander vitreus) to increased spawning habitat availability as a result of dam removal was studied by comparing scenarios with and without a high‐head dam in the Sandusky River (Ohio), a major tributary to Lake Erie. A conceptual, ecological model was proposed to define the relationship between hydrodynamics and walleye spawning, egg hatching, larval drift and survival. A mathematical, ecological model of the early life‐history stages was then developed and coupled with time series of depth and velocity predictions over the spawning grounds from a 1‐D hydrodynamic model. Model simulations were run for 1984–1993 for both the with‐ and without‐dam scenarios to assess the potential benefit of dam removal. The simulation results demonstrated that velocity, depth and water temperature are major factors influencing adult walleye spawning success. Without the dam, 10 times the amount of spawning habitat would be available for walleye to spawn. This increase in spawning habitat area resulted in up to five times the total egg deposition and seven times the larval output to the nursing grounds, based on the assumption that 5% of the walleye population of Lake Erie migrated up the Sandusky River to spawn. We concluded that the spawning habitat in the current condition (with the dam) is limiting and additional spawning habitat upstream could significantly increase the number of larval walleye drifting to Lake Erie. The model sensitivity analysis showed that the number of walleye migrating up the river in spring is the dominant factor for larval recruitment to the lake. Copyright © 2006 John Wiley & Sons, Ltd.     

子午线轮胎动力站技术管理

介绍了子午轮胎硫化的各种介质性能要求及介质供应工艺流程,分析了各种介质的质量要求.介绍了系统各参数的控制调节项目及运行技术管理的一些措施.     

改性生物质作为型煤黏结剂的研究

探讨了用NaOH改性生物质秸秆作为型煤黏结剂的可行性,考察了NaOH溶液浓度对生物质改性的影响以及生物质添加量、无机物(MgO和MgCl2)添加量对型煤机械强度、防水性能和着火温度的影响。研究结果表明,NaOH改性液的质量分数为1.0%~2.0%时,制得的生物质型煤有较高的机械强度;生物质添加量在2%~20%时,随生物质添加量的增加,机械强度增加,着火温度降低,但防水性较差;而在生物质型煤中加入适量无机黏结剂后,型煤有很高的浸水强度,表现出优越的防水性能。     

Structural study of cubic pyrochlores based on quantum mechanical simulation

In the ideal A₂B₂O₆O′ pyrochlore structure, the x-value of O atom position is a variable parameter. In Bi_1.5ZnNb_1.5−xTa_xO₇ (BZNT) cubic pyrochlores, the x-values alter with the different compositions of Nb/Ta. In this work, a series of initial models for BZNT were established by analyzing X-ray diffraction data. Then three structure modifying methods, including Rietveld refinement, Rietveld refinement with energy and geometry optimization based on quantum mechanics, were employed to obtain the precise models using Materials Studio. Moreover, the reflectivities of BZNT were computed by quantum mechanical simulation based on the refined models. Comparing the simulation results from different modifying models with the experimental results, it is found that Rietveld refinement with energy optimization is the most accurate method for BZNT pyrochlores. According to the simulation results, the different reflectivities correspond well with various x-values of O atom positions in BZNT pyrochlores.     

富氧燃烧技术在梭式窑中的应用

研究了富氧燃烧技术对梭式窑烧成的影响.研究结果表明,随着氧浓度从21%-30%的逐渐增加,CO总浓度和NO总浓度都先明显下降,后缓慢上升;节能效果在初始段较为明显,而后效果不明显;而实际烟气量与氧浓度成反比,与过剩空气系数成正比.     

Online and Offline Rotary Regression Analysis of Torque Estimator for Switched Reluctance Motor Drives

A new torque estimator for switched reluctance motor (SRM) drives based on 2-D rotary regression analysis is presented in this paper. The proposed torque estimator is composed of a bicubic regressive polynomial as a function of rotor position and input current. The regressive coefficients can be computed offline or online from the torque characteristics acquired either experimentally or from numerical computation. Furthermore, a torque estimation method by taking mutual coupling into consideration is proposed. It can be seen that the estimated and experimentally obtained self-coupling and mutual-coupling torque characteristics are in good agreement with each other. In addition, the dynamic torque waveforms with and without the mutual coupling, estimated by the proposed estimator, are found to be virtually the same as those obtained from the bicubic spline interpolation for SRM drives with single-pulse voltage, hysteresis current chopping, as well as with voltage pulse width modulation control. The success of all the case studies being reported is a good validation of the usefulness and accuracy of the proposed real-time torque estimator that, as described in this paper, can be used to quickly estimate the instantaneous output torque of SRM drives.     

Synthesis and Characterizations of Triphenylamine End-Functionalized Polymers via Reversible Addition-Fragmentation Chain Transfer Polymerization

A novel reversible addition-fragmentation chain transfer (RAFT) reagent bearing triphenylamine (TPA) group, 4-diphenylamino-dithiobenzoic acid benzyl ester (DDABE), was designed and synthesized. It was used in the RAFT polymerizations of styrene (St) and methyl acrylate (MA) to prepare end-functionalized polymers. The results of the polymerization showed that the RAFT polymerizations could be well controlled using DDABE as the RAFT agent. Number-average molecular weight (M_n,GPC) increased linearly with monomer conversion, and molecular weight distributions were relatively narrow (PDI< 1.50). The results of chain-extension reaction, ¹H NMR spectra and UV/Vis spectra confirmed that most of the polymers chains were end-capped by the functional triphenylamine (TPA) groups. The effect of feed molar ratios of St/DDABE/AIBN on polymerization was investigated.     

Preparation and Compressive Stress Effect of Polymer Matrix RE-Fe Giant Magnetostrictive Composite

Polymer matrix RE-Fe giant magnetostrictire composite （GMPC） was prepared using bonding and magnetic field forming technique, and magnetostriction of samples was measured for different compressive stress. The experimental results show thai there is certain compressive effect in GMPC. And the influence of compressive stress on magnetostriction of sample was investigated. It offers essential reference for application and device design of GMPC.     

中央空调系统制冷主机房建设中的几项节能措施

中央空调系统由制冷主机房、水子系统、风子系统以及楼宇自控（BA）等部分组成。制冷主机房是中央空调系统的心脏部分，它是由若干台制冷主机，一次冷冻水子系统，二次冷冻水子系统、冷却水子系统、冷却塔、控制柜等组成。它的运行状况直接关系到中央空调系统的能耗，本文将叙述新锦江大酒店制冷主机房建设中的几点节能措施。     

WASP6水质模型在渭河流域水环境容量解析中的应用

将WASP6水质模型应用于渭河流域陕西片,分析流域水环境的污染现状,并采用模型试错法模拟计算渭河陕西段水环境容量,并对比分析节水增流前后水质变化,根据分析结果提出节水增流减污的水污染控制方案,为渭河的污染治理提供依据。