Onset of buoyancy-driven convection in melting from below

When a horizontal homogeneous solid is melted from below, convection can be induced in a thermally unstable melt layer. In this study the onset of buoyancy-driven convection during time-dependent melting is investigated by using similarly transformed disturbance equations. The critical Rayleigh numbers based on the melt-layer thickness are found numerically for various conditions. For small superheats, the present predictions approach the well known results of classical Rayleigh-Bénard problems, that is, critical Rayleigh numbers are located between 1,296 and 1,708, regardless of the Prandtl number. However, for high superheats the critical Rayleigh number increases with an increase in phase change rate but with decrease in Prandtl number.     

Catalytic oxidation of naphthalene using a Pt/Al2O3 catalyst

Polycylic aromatic hydrocarbons (PAHs) are listed as carcinogenic and mutagenic priority pollutants, belonging to the environmental endocrine disrupters. Most PAHs in the environment stem from the atmospheric deposition and diesel emission. Consequently, the elimination of PAHs in the off-gases is one of the priority and emerging challenges. Catalytic oxidation has been widely used in the destruction of organic compounds due to its high efficiency (or conversion of reactants), its economic benefits and good applicability.

This study investigates the application of the catalytic oxidation using Pt/γ-Al₂O₃ catalysts to decompose PAHs and taking naphthalene (the simplest and least toxic PAH) as a target compound. It studies the relationships between conversion, operating parameters and relevant factors such as treatment temperatures, catalyst sizes and space velocities. Also, a related reaction kinetic expression is proposed to provide a simplified expression of the relevant kinetic parameters.

The results indicate that the Pt/γ-Al₂O₃ catalyst used accelerates the reaction rate of the decomposition of naphthalene and decreases the reaction temperature. A high conversion (over 95%) can be achieved at a moderate reaction temperature of 480 K and space velocity below 35,000 h⁻¹. Non-catalytic (thermal) oxidation achieves the same conversion at a temperature beyond 1000 K. The results also indicate that Rideal–Eley mechanism and Arrhenius equation can be reasonably applied to describe the data by using the pseudo-first-order reaction kinetic equation with activation energy of 149.97 kJ/mol and frequency factor equal to 3.26 × 10¹⁷ s⁻¹.     

Identification of the minimum effective dose for right-censored survival data

In this paper, we consider identifying the minimum effective dose (MED) in a dose-response study when survival data are subject to random right-censorship, where the MED is defined to be the smallest dose level under study that has survival advantage over the zero-dose control. To this end, we suggest single-step-down testing procedures based on three different types of weighted logrank statistics, respectively. The comparative results of a Monte Carlo error rate and power/bias study for a variety of survival and censoring distributions are then presented and discussed. The application of the testing procedures for identifying the MED is finally illustrated by using a numerical example of prostate cancer data.     

桉木硫酸盐浆不同漂白技术的评价

高白度漂白商品浆的白度已从通常的88%～90%提高到更高的水平,达到92%.这种高白度的要求导致了纸厂使用高价格光学漂白剂,以及过量使用这种添加剂的环境风险.     

Effect of Thickness of the p-AlGaN Electron Blocking Layer on the Improvement of ESD Characteristics in GaN-Based LEDs

The following letter presents a study regarding GaN-based light-emitting diodes (LEDs) with p-type AlGaN electron blocking layers (EBLs) of different thicknesses. The study revealed that the LEDs could endure higher electrostatic discharge (ESD) levels as the thickness of the AlGaN EBL increased. The observed improvement in the ESD endurance ability could be attributed to the fact that the thickened p-AlGaN EBL may partly fill the dislocation-related pits that occur on the surface of the InGaN-GaN multiple-quantum well (MQW) and that are due to the strain and the low-temperature-growth process. If these dislocation-related pits are not partly suppressed, they will eventually result in numerous surface pits associated with threading dislocations that intersect the InGaN-GaN (MQW), thereby reducing the ESD endurance ability. The results of the experiment show that the ESD endurance voltages could increase from 1500 to 6000 V when the thickness of the p-AlGaN EBL in the GaN LEDs is increased from 32.5 to 130 nm, while the forward voltages and light output powers remained almost the same.     

烧结成品运输自动控制系统的改进

对烧结成品运输自控系统不稳定性因素进行了分析，提出了采取优化硬件外围工作环境，完善软件保护程序等改进措施。改进后的自控系统稳定性明显提高。     

Development of a fuzzy decision model for manufacturability evaluation

A manufacturability evaluation decision model is formulated and analyzed based on fuzzy logic and multiple attribute decision-making under the concurrent engineering environment. The study emphasizes on the treatment of the linguistic and vagueness at the early product development stage. The study also considers the function integration of the total life cycle of a product. Hence, the integrated decision model covers the multi-level, multi-goal requirements of the products. Multiple criteria such as the goal space, the decision space, the function space, the development (i.e., product & process design) space, and the activity space, are then applied under different analysis of decision-making methods. For instances, the fuzzy multiple attribute decision-making (FMADM) combined with activity-based costing (ABC) can be used in the activity decision space. The fuzzy logic decision model can be applied in the goal decision space. The results of this study point out the importance of early decision making capability. An example of a high-pressure vessel is provided to demonstrate the proposed model for evaluating the manufacturability.     

Note on ‘Construction of Double Sampling s‐Control Charts for Agile Manufacturing’

He and Grigoryan (Quality and Reliability Engineering International 2002; 18 :343–355) formulated the design of a double‐sampling (DS) s control chart as an optimization problem and solved it with a genetic algorithm. They concluded that the DS s control charts can be a more economically preferable alternative in detecting small shifts than traditional s control charts. We explain that, since they only considered the average sample size when the process is in control, their conclusion is questionable. Copyright © 2006 John Wiley & Sons, Ltd.     

Technology for testing nondeterministic client/server database applications

The execution of a client/server application involving database access requires a sequence of database transaction events (or, T-events), called a transaction sequence (or, T-sequence). A client/server database application may have nondeterministic behavior in that multiple executions thereof with the same input may produce different T-sequences. We present a framework for testing all possible T-sequences of a client/server database application. We first show how to define a T-sequence in order to provide sufficient information to detect race conditions between T-events. Second, we design algorithms to change the outcomes of race conditions in order to derive race variants, which are prefixes of other T-sequences. Third, we develop a prefix-based replay technique for race variants derived from T-sequences. We prove that our framework can derive all the possible T-sequences in cases where every execution of the application terminates. A formal proof and an analysis of the proposed framework are given. We describe a prototype implementation of the framework and present experimental results obtained from it.