单幅图像多尺度小波深度提取算法

针对浅景深图像中平滑前景区域深度提取误差大的问题,基于像素点分类思想对深度值进行修正,提出一种基于多尺度小波线索的、可同时面向单幅浅景深图像和广角图像的深度图提取算法.首先使用小波分析法在多个尺度下提取图像深度信息;然后提出自适应分类法并根据尺度与深度变化规律对像素点做深度修正,得到深度图;最后结合区域生长与边缘分割算法对深度图进行区域优化.为了加快深度计算,还提出了快速zerocount法以及多尺度加速法来满足标清视频实时处理要求.实验结果证明,采用文中算法获得的深度图相对深度正确,前景和背景区域深度一致性好.     

机动车制动液的研制

介绍了合成型机动车制动液的生产和配方，讨论了物料组成对产品的影响。     

运动发酵单胞原生质球的形成和再生

运动发酵单胞(Zymomonas mobilis)ATCC29191菌株在含1～3g/L甘氨酸的液体培育12小时的菌体,用含20g/L的溶菌酶溶液处理12小时,可以稳定得到80％～90％的原生质球。原生质球稀释后在底层再生培养基上涂布,上面复盖一层半固体培养基,30℃培养5～7小时,再生率可达10~(-2)水平。     

Thermal and crystallization characteristics of poly(ethylene terephthalate) with poly(oxybenzoate‐p‐trimethylene terephthalate) copolymer

Poly(ethylene terephthalate) (PET) was blended with two different poly(oxybenzoate‐p‐trimethylene terephthalate) copolymers, designated T28 and T64, with the level of copolymer varying from 1 to 15 wt %. All samples were prepared by solution blending in a 60/40 (by weight) phenol/tetrachloroethane solvent at 50°C. The crystallization behavior of the samples was studied by DSC. The results indicate that both T28 and T64 accelerated the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of PET crystallization rate was most pronounced in the PET/T64 blends with a maximum level at 5 wt % of T64. The melting temperatures for the blends are comparable to that of pure PET. The observed changes in crystallization behavior are explained by the effect of the physical state of the copolyester during PET crystallization as well as the amount of copolymer in the blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1599–1606, 2002     

一种新的BOC(n,n)型信号的精确捕获算法

针对BOC(n,n)型信号自相关函数存在三个峰值导致伪码捕获模糊性的问题,提出了一种新的基于相关函数的精确无模糊的捕获算法。该算法将信号进行频域的多普勒补偿,通过本地增设QBOC(n,n)支路,利用BOC(n,n)信号自相关以及BOC(n,n)和QBOC(n,n)互相关,经移位±TC/4、取模、求和、平方运算而实现。理论与仿真分析表明,该算法在不改变自相关主峰宽度的情况下完全消除相关副峰的同时,显著提高了主峰峰值;比传统捕获算法的性能好4.5 dB左右,并且捕获精度良好、易于实现。     

一种带交叉因子的双向寻优粒子群优化算法

针对传统粒子群算法易早熟、精度低、后期收敛速度慢等问题,结合反向学习理论,提出了一种基于交叉因子的双向寻优粒子群优化算法(CBMPSO)。该算法使初始种群在搜索区域均匀分布,计算粒子及其反向粒子的适应值,取最优作为初始种群;迭代过程增加对全局最差粒子的跟踪,随机开启基于交叉因子的双向学习机制。对几种典型函数的测试结果表明,CBMPSO算法的寻优能力及收敛速度有了显著提高,并且能够有效避免早熟收敛问题。     

Fe~(2+)注人Al_2O_3陶瓷及其退火改善材料表面电学性能的研究

对透明Al_2O_3陶瓷进行了Fe元素的离子注入。用“Van der Pauw”方法测定注入层的电阻率,并结合Hall效应测量,确定样品载流子浓度和迁移率。 本文主要阐述未经退火和退火的Fe~(2+)注入Al_2O_3陶瓷表面电性能,并应用Rutherford背散射技术等方法进行分析比较,试图得到有关晶格损伤及恢复、注入离子的纵向浓度分布,缺陷等信息。最后,简要地叙述了注入层的导电机制。     

Effect of a surface active pyrrole on the conductivity of polypyrrole composites

A surface active pyrrole, which has a long hydrophobic chain attached to the 3 position of the pyrrole ring, is used to modify the surface properties of the pores of a porous, crosslinked polystyrene. The latter is prepared starting from a concentrated emulsion (an emulsion with a large volume fraction of the dispersed phase, here 0.81) of water dispersed in a continuous medium composed of styrene, divinyl benzene, a suitable surfactant, an initiator, and the surface active pyrrole. This modified crosslinked porous medium is emplyed as the host for a polypyrrole composite that is prepared first by imbibing the host with a solution of pyrrole and subsequently with an oxidant solution. The latter plays the role of catalyst for polymerization as well as the role of dopant. The presence of the head groups of 3-alkyl pyrrole molecules on the surface of the pores of the host polymer increases the affinity of the surface for pyrrole. The improved wetting thus achieved for the pyrrole solution ensures a higher connectivity among the pyrrole films present on the internal surface of the host polymer and increases the conductivity of the polypyrrole composites by a factor of 2 to 14, depending upon the solvents employed for pyrrole and oxidant.     

Ozone-Based Advanced Oxidation Processes for the Decomposition of N-Methyl-2-Pyrolidone in Aqueous Medium

The present study investigates the decomposition of N-Methyl-2-Pyrolidone (NMP) using conventional ozonation (O₃), ozonation in the presence of UV light (UV/O₃), hydrogen peroxide (O₃/H₂O₂), and UV/H₂O₂ processes under various experimental conditions. The influence of solution pH, ozone gas flow dosage, and H₂O₂ dosage on the degradation of NMP was studied. All ozone-based advanced oxidation processes (AOPs) were efficient in alkaline medium, whereas the UV/H₂O₂ process was efficient in acidic medium. Increasing ozone gas flow dosage would accelerate the degradation of NMP up to certain level beyond which no positive effect was observed in ozonation as well as UV light enhanced ozonation processes. Hydrogen peroxide dosage strongly influenced the degradation of NMP and a hydrogen peroxide dosage of 0.75 g/L and 0.5 g/L was found to be the optimum dosage in UV/H₂O₂ and O₃/H₂O₂ processes, respectively. The UV/O₃ process was most efficient in TOC removal. Overall it can be concluded that ozonation and ozone-based AOPs are promising processes for an efficient removal of NMP in wastewater.