Ultrasound initiated maleic anhydride grafted onto a novel polypropylene copolymer

The reaction of maleic anhydride (MAH) grafted onto propylene‐based copolymer (DP) without adding any initiator was conducted through ultrasound assisted extrusion in this article. The effects of ultrasound power, die temperature, and MAH content on the grafting degree and efficiency were studied. With increasing ultrasound power, the grafting degree and efficiency of DP‐g‐MAH increase. The presence of ultrasound with higher power and lower die temperature is beneficial to increase the grafting degree and efficiency. The increase of MAH content can increase the grafting degree but reduce the grafting efficiency. Based on the results of melt flow index, dynamical rheological, gel permeation chromatograph (GPC), and Fourier transform infrared spectroscopy (FTIR) tests, the mechanisms of the grafting reaction were proposed. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Double Precursor Solution Coating Approach for Low-Temperature Sintering of [Pb(Mg1/3Nb2/3)O3]0.63[PbTiO3]0.37 Solids

Lead-based piezoelectric ceramics typically require sintering temperatures higher than 1000°C at which significant lead loss can occur. Here, we report a double precursor solution coating (PSC) method for fabricating low-temperature sinterable polycrystalline [Pb(Mg_1/3Nb_2/3)O₃]_0.63-[PbTiO₃]_0.37 (PMN–PT) ceramics. In this method, submicrometer crystalline PMN powder was first obtained by dispersing Mg(OH)₂-coated Nb₂O₅ particles in a lead acetate/ethylene glycol solution (first PSC), followed by calcination at 800°C. The crystalline PMN powder was subsequently suspended in a PT precursor solution containing lead acetate and titanium isopropoxide in ethylene glycol to form the PMN–PT precursor powder (second PSC) that could be sintered at a temperature as low as 900°C. The resultant d ₃₃ for samples sintered at 900°, 1000°, and 1100°C for 2 h were 600, 620, and 700 pm/V, respectively, comparable with the known value. We attributed the low sintering temperature to the reactive sintering nature of the present PMN–PT precursor powder. The reaction between the nanosize PT and the submicrometer-size PMN occurred roughly in the same temperature range as the densification, 850°–900°C, thereby significantly accelerating the sintering process. The present PSC technique is very general and should be readily applicable to other multicomponent systems.     

Effects of molecular weight and molecular structure of low profile additives on the properties of bulk molding compound (BMC)

The effects of molecular weight and molecular structure of styrene(St)‐based and vinyl acetate(VAc)‐based low‐profile additive (LPA) on the curing kinetics and compatibility of unsaturated polyester (UP)/LPA system and linear shrinkage, water absorption rate, surface gloss and pigmentability of bulk molding compound (BMC) were investigated. Results show that the curing reaction rate decreases with an increase of the molecular weight of LPA due to the chain entanglement effect. The plasticizing effect of LPA on the (UP) network was reduced with an increase of the molecular weight of LPA. Water absorption of BMC increases as the molecular weight of LPA increases, implying that more microvoids were formed inside the BMC, resulting a lower linear shrinkage rate, and worse pigmentability. However, good shrinkage control LPA does not necessarily lead to a smoother surface and better surface gloss. Furthermore, modified LPAs possess better compatibility with UP, the final curing conversion of UP is elevated, and both better shrinkage control and surface properties are also observed.     

The effect of alkyd resins on the properties of AA‐NC semi‐IPNs as binders in wood finish

Wood coatings of AA‐NC semi‐interpenetrating polymer networks (semi‐IPNs), made from acid curing amino‐alkyd resins (AA) and nitrocellulose (NC), were prepared by sequential polymerization method. To investigate the effects of oil length on the properties of AA‐NC semi‐IPNs, three grades of alkyd resins (Alkyd) containing 38, 48, and 58% oil were synthesized with phthalic anhydride, glycerol, and soybean oil, employing alcoholysis method. The butylated urea formaldehyde resin (UF) and melamine formaldehyde resin (MF) were also prepared in this study. The AA‐NC semi‐IPNs were maintained at a weight ratio of AA : NC of 25 : 75, where the AA was the composition of MF : UF : Alkyd of 7.5 : 22.5 : 70 (by weight), and 10% of p‐toluene sulfonic acid solution (concentration, 25% in isopropyl alcohol) based on the weight of amino resins was added as acid catalyst. The properties of coatings such as viscosity, drying time, and gel time, and the properties of films including adhesion, hardness, abrasion resistance, impact resistance, tensile strength, released formaldehyde, lightfastness, solvent resistance, and durability were examined. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1923–1927, 2004     

Dynamic airflow simulation within an isolation room

In many hospitals, isolation rooms are used to contain patients who are highly infectious, and the spread of air and bacteria within the isolation room is closely relates to room air distribution. This article uses the computational fluid dynamics (CFD) method to investigate the effects of a moving person and the opening and closing of a sliding door on room air distribution, including velocity, pressure and contaminant fields. Dynamic meshes are employed to simulate the movement of the walking person and sliding door. According to numerical results, the impact of those moving objects on room air distribution is addressed in this study.     

Evaluation of the corrosion resistance of anodized aluminum 6061 using electrochemical impedance spectroscopy (EIS)

The corrosion resistance of anodized Al 6061 produced by two different anodizing and sealing processes was evaluated using electrochemical impedance spectroscopy (EIS). The scanning electron microscope (SEM) was employed to determine the surface structure and the thickness of the anodized layers. The EIS data revealed that there was very little change of the properties of the anodized layers for samples that were hard anodized in a mixed acid solution and sealed in hot water over a 365 day exposure period in a 3.5 wt% NaCl solution. The specific admittance A_s and the breakpoint frequency f_b remained constant with exposure time confirming that the hard anodizing process used in this study was very effective in providing excellent corrosion resistance of anodized Al 6061 over extended exposure periods. Some minor degradation of the protective properties of the anodized layers was observed for samples that were hard anodized in H₂SO₄ and exposed to the NaCl solution for 14 days.     

Transcriptomic Analysis Suggests Auxin Regulation in Dorsal-Ventral Petal Asymmetry of Wild Progenitor Sinningia speciosa

The establishment of dorsal–ventral (DV) petal asymmetry is accompanied by differential growth of DV petal size, shape, and color differences, which enhance ornamental values. Genes involved in flower symmetry in Sinningia speciosa have been identified as CYCLOIDEA (SsCYC), but which gene regulatory network (GRN) is associated with SsCYC to establish DV petal asymmetry is still unknown. To uncover the GRN of DV petal asymmetry, we identified 630 DV differentially expressed genes (DV-DEGs) from the RNA-Seq of dorsal and ventral petals in the wild progenitor, S. speciosa ‘ES’. Validated by qRT-PCR, genes in the auxin signaling transduction pathway, SsCYC, and a major regulator of anthocyanin biosynthesis were upregulated in dorsal petals. These genes correlated with a higher endogenous auxin level in dorsal petals, with longer tube length growth through cell expansion and a purple dorsal color. Over-expression of SsCYC in Nicotiana reduced petal size by regulating cell growth, suggesting that SsCYC also controls cell expansion. This suggests that auxin and SsCYC both regulate DV petal asymmetry. Transiently over-expressed SsCYC, however, could not activate most major auxin signaling genes, suggesting that SsCYC may not trigger auxin regulation. Whether auxin can activate SsCYC or whether they act independently to regulate DV petal asymmetry remains to be explored in the future.     

Emission of polycyclic aromatic hydrocarbons from the pyrolysis of liquid crystal wastes

A liquid crystal display can be described as a panel consisting of two plates of glass with liquid crystals in the space between. Generally, the liquid crystal wastes are extracted and separated into various fractions. Some recyclable materials, i.e., metals, glass, plastics, etc., are recycled, but the liquid crystals are incinerated. The emission factors for 16 U.S. EPA priority polycyclic aromatic hydrocarbons (PAHs) from the combustion of liquid crystal are approximately 390 and 1520 times higher than that of waste terephthalic acid and biological sludge combustion, respectively. In this study, we determined the emission of PAHs from the liquid crystals pyrolysis. We also investigated the fragments and gas compositions using on-line thermogravimetry–mass spectrometry (TG–MS). A temperature series of 14 fragments was analyzed in nitrogen, and was found to include m/z: 30, 32, 42, 44, 55, 57, 67, 81, 95, 109, 128, 166, 178, and 202. The fragments at m/z 32 represents formaldehyde and the fragment at m/z 44 is carbon dioxide. The fragments at m/z 55, 57, 67, 81, 95, and 109 represent hydrocarbon components, all of which may be liquid crystal by products. The TG–MS as analyzed above can offer a better understanding of the mechanisms of byproduct formation in liquid crystal waste pyrolysis.Experimentally, not detected (n.d.) −5.98 and n.d. −20.2 μg/g of 16 PAHs, in the particulate and gas phases, respectively, are determined from the emission of liquid crystal waste pyrolysis. The PAH profiles showed a predominance of naphthalene (42.6%) and phenanthrene (13.5%). The total PAH emissions for the 16 species were 7.75 and 44.05 μg/g in the particulate and gas phases, respectively, significantly lower than the values associated with liquid crystal combustion. From the viewpoint of PAH emission control, our results suggest that the pyrolysis is a better option for the disposal of liquid crystal wastes than that of combustion.     

A label‐based information flow control model for object‐oriented systems

Abstract

This paper proposes a label‐based information flow control model to prevent information leakage within object‐oriented systems. It offers the features of: (a) adapting to dynamic object state change, (b) adapting to dynamic role change, (c) preventing indirect information leakage, (d) detailing the control granularity to variables, (e) allowing purpose‐oriented method invocation, (f) controlling method invocation through argument sensitivity, (g) allowing declassification, and (h) allowing only trusted sources to write a variable.     

Construction rescheduling based on a manufacturing rescheduling framework

Changes during project execution frequently require schedule updating and rescheduling. However, few studies have discussed rescheduling issues or implemented rescheduling solutions for construction projects. This study investigates resource-constrained construction rescheduling issues using concepts associated with manufacturing rescheduling. Based on an initial schedule and actual progress, a novel rescheduling optimization model using Constraint Programming (CP) techniques is developed to reschedule projects. Two rescheduling methods: (1) complete regeneration (CR); and, (2) partial rescheduling (PR) while minimizing overall project variation are implemented in the proposed model to demonstrate the model capability and applications. PR requiring additional treatments to decrease overall project variation is performed using a novel constraint-release mechanism. Finally, using a case study, optimization results obtained using two rescheduling methods are analyzed and discussed.