Discharge characteristics of lead dioxide electrode prepared with cementation lead oxide

Lead acid batteries have had restricted applications because of relatively low energy density below 50Wh/kg. Many efforts have achieved lighter battery components such as separators, connections and containers etc. Thus, the most important problem of the lead acid battery is to improve the low capacity of the active material in the positive electrode. The purpose of this study is to improve the utilization of the active material in the lead dioxide electrode for the lead acid battery through the production of lead oxide with better physicochemical characteristics through cementation. A cementation reaction was performed in 1.0wt.%HCl solution using pure magnesium plate as the reductant. We investigated the utilization of the active material and discharge characteristics of the positive electrode with a current density ranging from 3.4 to 108.8mAcm⁻². As a result, the active material utilization was about 72% at 3.48 mAcm⁻² and increased with decreasing current density. The discharge characteristics according to current density are especially very good at high current density     

Microstructure and mechanical property of irradiated Zr−2.5Nb pressure tube in Wolsong unit-1

With the aim of assessing the degradation of Zr−2.5Nb pressure tubes operating in the Wolsong unit-1 nuclear power plant, characterization tests are being conducted on irradiated Zr−2.5Nb tubes removed after 10-year operation. The examined tube had been exposed to temperatures ranging from 264 to 306°C and a neutron fluence of 8.9×10²¹ n/cm² (E>1 MeV) at the maximum. Tensile tests were carried out at temperatures ranging from RT to 300°C. The density of a-type and c-type dislocations was examined on the irradiated Zr-2.5Nb tube using a transmission electron microscope. Neutron irradiation up to 8.9×10²¹ n/cm² (E>1 MeV) yielded an increase in a-type dislocation density of the Zr−2.5Nb pressure tube to 7.5×10¹⁴ m⁻², which was highest at the inlet of the tube exposed to the low temperature of 275°C. In contranst, the c-component dislocation density did not change with irradiation, keeping an initial dislocation density of 0.8×10¹⁴ m⁻² over the whole length of the tube. As expected, the neutron irradiation increased mechanical strength by about 17–26% in the transverse direction and by 34–39% in the longitudinal direction compared to that of the unirradiated tube at 300°C. The change in the mechanical properties with irradiation is discussed in association with the microstructural change as a function of temperature and neutron fluence.     

DCT statistics-based digital dropout detection in degraded archived media

With the rapid development of visual digital media, the demand for better quality of service has increased the pressure on broadcasters to automate their error detection and restoration activities for preserving their archives. Digital dropout is one of the defects that affect archived visual materials and tends to occur in block by block basis (size of 8 × 8). It is well established that human visual system (HVS) is highly adapted to the statistics of its visual natural environment. Consequently, in this paper, we have formulated digital dropout detection as a classification problem which predicts block label based on statistical features. These statistical features are indicative of perceptual quality relevant to human visual perception, and allow pristine images to be distinguished from distorted ones. Here, the idea is to extract discriminant block statistical features based on discrete cosine transform (DCT) coefficients and determine an optimal neighborhood sampling strategy to enhance the discrimination ability of block representation. Since this spatial frame based approach is free from any motion computation dependency, it works perfectly in the presence of fast moving objects. Experiments are performed on video archives to evaluate the efficacy of the proposed technique.     

Formation stabilization and resizing based on the control of inter‐agent distances

We propose a control strategy that could steer the group of mobile agents in the plane to achieve a specified formation. The control law could be implemented in a fully decentralized manner so that each agent moves on their own local reference frame. Under the acyclic minimally persistent graph topology, each agent measures the relative displacements of neighboring agents and then adjusts the distances between them to achieve the desired formation. As well as achieving a fixed formation, we could resize the formation only by changing the leader edge, which connects the leader with the first‐follower in acyclic minimally persistent graph, without changing the structures of the control law. Copyright © 2014 John Wiley & Sons, Ltd.     

Cognitive evaluation for conceptual design: cognitive role of a 3D sculpture tool in the design thinking process

ABSTRACT

This study focuses on the decisive role played by the digital design environment in the cognitive design process and design thinking. To analyse the cognitive role of digital design tools, we carried out a protocol analysis of conventional design sketching and a 3D sculpture tool. Cognitive evaluation was a differentiating factor when considering the contextual role of the 3D sculpture tool in subsequent evaluations, non-sequential evaluations for conversion, and passive approaches within the design process. Cognitive evaluation played the following roles: validation, extension, navigation, exploration, and confirmation. The navigation, exploration, and extension roles played by non-sequential evaluation were mainly related to inductive design thinking. Finally, the types of cognitive evaluation and their roles when using the 3D sculpture tool were different, according to the design thinking type. This study explored the multidimensional roles of cognitive evaluation using a 3D sculpture tool and its relationship with design thinking types.     

Collapse-free thermal bonding technique for large area microchambers in plastic lab-on-a-chip applications

Bonding is an essential step to form microchannels or microchambers in lab-on-a-chip applications. In this paper, we present a novel plastic thermal bonding technique to seal and form large area microchambers (planar characteristic width and length on the order of 1 mm and characteristic thickness on the order of 10–100 μm) without collapse by introducing a holed pressure equalizing plate (HPEP) that includes holes of the same size and shape as the microchambers. To demonstrate the proposed technique, two types of large area microchambers [(1) 20 × 10 mm and 40 μm thick and (2) 12 × 2.5 mm and 120 μm thick] with microchannels were designed and replicated on plastic substrates by means of hot embossing and injection molding processes with prepared two nickel mold inserts. The replicated large area microchambers as well as the microchannels in the plastic lab-on-a-chip were successfully sealed (i.e., no leakage) and formed without any collapse by the proposed thermal bonding technique with the help of the HPEP.     

12.1‐in. WXGA AMOLED display driven by InGaZnO thin‐film transistors

Abstract— A full‐color 12.1‐in.WXGA active‐matrix organic‐light‐emitting‐diode (AMOLED) display was, for the first time, demonstrated using indium‐gallium‐zinc oxide (IGZO) thin‐film transistors (TFTs) as an active‐matrix backplane. It was found that the fabricated AMOLED display did not suffer from the well‐known pixel non‐uniformity in luminance, even though the simple structure consisting of two transistors and one capacitor was adopted as the unit pixel circuit, which was attributed to the amorphous nature of IGZO semiconductors. The n‐channel a‐IGZO TFTs exhibited a field‐effect mobility of 17 cm²/V‐sec, threshold voltage of 1.1 V, on/off ratio >10⁹, and subthreshold gate swing of 0.28 V/dec. The AMOLED display with a‐IGZO TFT array is promising for large‐sized applications such as notebook PCs and HDTVs because the a‐IGZO semiconductor can be deposited on large glass substrates (larger than Gen 7) using the conventional sputtering system.     

Human tracking and silhouette extraction for human–robot interaction systems

In this study, we propose a new integrated computer vision system designed to track multiple human beings and extract their silhouette with a pan-tilt stereo camera, so that it can assist in gesture and gait recognition in the field of Human–Robot Interaction (HRI). The proposed system consists of three modules: detection, tracking and silhouette extraction. These modules are robust to camera movements, and they work interactively in near real-time. Detection was performed by camera ego-motion compensation and disparity segmentation. For tracking, we present an efficient mean shift-based tracking method in which the tracking objects are characterized as disparity weighted color histograms. The silhouette was obtained by two-step segmentation. A trimap was estimated in advance and then effectively incorporated into the graph-cut framework for fine segmentation. The proposed system was evaluated with respect to ground truth data, and it was shown to detect and track multiple people very well and also produce high-quality silhouettes.

Design and Implementation of a Ubiquitous Robotic Space

This paper describes a concerted effort to design and implement a robotic service framework. The proposed framework is comprised of three conceptual spaces: physical, semantic, and virtual spaces, collectively referred to as a ubiquitous robotic space. We implemented a prototype robotic security application in an office environment, which confirmed that the proposed framework is an efficient tool for developing a robotic service employing IT infrastructure, particularly for integrating heterogeneous technologies and robotic platforms.