Shallow bath chemical deposition of CdS thin film

Cadmium sulfide thin film was grown by shallow chemical bath deposition technique. This technique used a highly conducted hot plate to heat the substrate, while using a shallow bath for higher thermal gradients. As a result, large area uniformity could be achieved and the homogeneous nucleation was suppressed. More importantly, the solution used was greatly reduced, which is crucial for cost reduction in practice. The effects of temperature and shaking on the growth kinetics and film properties were investigated. The reaction activation energy was obtained to be 0.84 eV, and was not affected much by shaking indicating that the deposition is essentially reaction controlled. Furthermore, the films deposited at low or high temperature conditions had better photoconductivity.     

Simplified equations for determining double‐K fracture parameters of concrete for 3‐point bending test

The paper presents simplified polynomial equations for determining the double‐K fracture parameters of concrete for 3‐point bending beams with variable strengths and material properties of concrete. The derived equations avoid complexities involved in computations of fracture parameters using existing analytical methods. The input data required for systematic computation in the study for deriving the nondimensional fracture parameters are obtained using a fictitious crack model. It is inferred that for a relative size of initial crack length, critical load and corresponding crack opening displacement maintain a linear relationship in their nondimensional forms. The value of critical mouth opening displacement can also be determined for known value of peak load using the derived nondimensional equation, thus avoiding the measurement of the crack mouth opening displacement in the experiment. Further, the derived polynomial equations predict the double‐K fracture parameters of concrete with negligible error as compared to those obtained based on experimental results.     

Silver hydroxyapatite reinforced poly(vinyl alcohol)—starch cryogel nanocomposites and study of biodegradation,compressive strength and antibacterial activity

In the present work polyvinyl alcohol‐starch/silver hydroxyapatite (PVA‐starch/AgHap) cryogel nanocomposites were prepared by successive freezing‐thawing of a blend of PVA and starch solutions to fabricate a cryogel followed by its reinforcement with silver hydroxyapatite (AgHap). The prepared macroporous cryogel nanocomposites were characterized by Infra‐red spectroscopy (FTIR), environmental scanning electron microscopy (ESEM), and particle size and charge analysis. The amylase induced enzymatic degradation of nanocomposites was studied gravimetrically in phosphate buffer saline (PBS) and effect of various parameters like chemical composition of the nanocomposite, number of freeze‐thaw cycles, and enzyme activity were assessed on the extent of degradation of the nanocomposite. The influence of chemical composition and experimental conditions like the number of freeze thaw cycles was studied on the elastic modulii of the cryogels. The in vitro cytotoxicity and antibacterial activity of nanocomposites was also evaluated against L‐529 fibroblast cells and gram positive and gram negative bacteria, respectively. POLYM. ENG. SCI., 59:254–263, 2019. © 2018 Society of Plastics Engineers     

Investigation on magnetically controlled delivery of doxorubicin from superparamagnetic nanocarriers of gelatin crosslinked with genipin

Gelatin (Type B) nanoparticles were prepared by a single W/O emulsion technique and characterized by infrared (IR) spectra, transmission electron micrographs (TEM), surface potential measurements and magnetization studies. Whereas the IR spectra clearly confirmed the presence of gelatin, genipin and doxorubicin in the loaded nanoparticles, the transmission electron micrographs (TEM) image depicts smooth surface, spherical shape and non-uniform size of nanoparticles (up to 100 nm). The prepared nanoparticles were loaded with doxorubicin, a well known anticancer drug, and in vitro release dynamics of entrapped drug was investigated as a function of various experimental factors such as percent loading of the drug, chemical architecture of the nanocarriers, and pH, temperature, ionic strength and nature of the release medium in presence and absence of magnetic field. The nanoparticles were also studied for their water sorption capacity. The drug release process was analyzed kinetically using Ficks power law and a correlation was established between the quantity of released drug and swelling of the nanoparticles.     

Wide dynamic range CMOS pixels with reduced dark current

The sensitivity of logarithmic pixels at low light levels is limited by the dark current that flows through the load transistor in the pixel in addition to the photocurrent. This dark current also degrades the performance of cameras containing these pixels by increasing the residual fixed pattern noise following fixed pattern noise correction. The performance of logarithmic pixels will therefore be improved if the dark current can be reduced. A review of the sources of dark current has led to the design of a new layout for a logarithmic pixel. Results are reported that show that this layout significantly reduces the dark current in the pixel. In addition, a simple change to the bias voltages applied to the proposed pixel means that the new layout can simultaneously exhibit a linear response at low light levels and a logarithmic response at higher light levels. Experimental results from both modes of operations are presented.     

Solving the multiple platforms configuration problem

The focus of manufacturing has been shifting from mass production to mass customization and producers are seeking ways to reduce production costs, still offering a competitive basket of products. One approach for implementing mass customization is to develop or produce products based on platform architecture. Variant products make use of the product platform as the starting point and then add or remove components to change features of the base product. This allows the manufacturer to offer the variety of products that meet market demands without developing each product independently. In this paper, we propose multiple platforms for the production of a given product family while minimizing the overall production cost. The methodology considers the demand for each product variant, with the decision variables as the optimal number of platforms, optimal configuration of each platform, and assignment of the products to the platforms. The problem is formulated as a mixed integer program, and both the optimal formulation and an evolutionary strategy based on Genetic Algorithm are presented. The approach is illustrated with an example from a family of cordless drills.     

Improvement of heat transfer through fins: A brief review of recent developments

Fins or extended surfaces are generally used in heat exchangers to enhance heat transfer between the main surface and ambient fluid. Various types of simple‐shaped fins, namely, rectangular, square, annular, cylindrical, and tapered, have been used with different geometrical combinations. To satisfy industrial demand, different trials have also been carried out for designing optimized fins. The optimization of fins can be performed either by enhancing heat dissipation at an exact fin weight or by diminishing the weight of the fin by precise heat dissipation. Recently a notable amount of work on some typical fins, like, porous fins and perforated fins, has also been carried out. This paper presents a brief review on heat transfer enhancement using fins of different types considering variable thermophysical and geometric parameters, which will also be useful for future use of geometrical modifications of extended surfaces, based on the cost and availability of space.