Defect‐Mediated Polarization Switching in Ferroelectrics and Related Materials: From Mesoscopic Mechanisms to Atomistic Control

The plethora of lattice and electronic behaviors in ferroelectric and multiferroic materials and heterostructures opens vistas into novel physical phenomena including magnetoelectric coupling and ferroelectric tunneling. The development of new classes of electronic, energy‐storage, and information‐technology devices depends critically on understanding and controlling field‐induced polarization switching. Polarization reversal is controlled by defects that determine activation energy, critical switching bias, and the selection between thermodynamically equivalent polarization states in multiaxial ferroelectrics. Understanding and controlling defect functionality in ferroelectric materials is as critical to the future of oxide electronics and solid‐state electrochemistry as defects in semiconductors are for semiconductor electronics. Here, recent advances in understanding the defect‐mediated switching mechanisms, enabled by recent advances in electron and scanning probe microscopy, are discussed. The synergy between local probes and structural methods offers a pathway to decipher deterministic polarization switching mechanisms on the level of a single atomically defined defect.     

Cell Culture on MEMS Platforms: A Review

Microfabricated systems provide an excellent platform for the culture of cells, and are an extremely useful tool for the investigation of cellular responses to various stimuli. Advantages offered over traditional methods include cost-effectiveness, controllability, low volume, high resolution, and sensitivity. Both biocompatible and bio-incompatible materials have been developed for use in these applications. Biocompatible materials such as PMMA or PLGA can be used directly for cell culture. However, for bio-incompatible materials such as silicon or PDMS, additional steps need to be taken to render these materials more suitable for cell adhesion and maintenance. This review describes multiple surface modification strategies to improve the biocompatibility of MEMS materials. Basic concepts of cell-biomaterial interactions, such as protein adsorption and cell adhesion are covered. Finally, the applications of these MEMS materials in Tissue Engineering are presented.     

Optimization of nitrilase production from a new thermophilic isolate

A new thermostable nitrilase‐producing isolate identified as Streptomyces sp. MTCC 7546 has been studied extensively for the optimization of enzyme production operating in batch mode. The benzonitrile was observed as inducer of nitrilase production. The isolate showed maximum nitrilase production after 24 h of incubation at optimal conditions. The strain grows well on a variety of carbon sources and produces the nitrilase that catalyses the hydrolysis of nitriles to acids without formation of amides. The enzyme is mostly active against mono‐ and di‐aliphatic nitriles (10 mmol L^?1) at pH of 7.4 and at a temperature of 50 °C. Copyright © 2007 Society of Chemical Industry     

Dynamic queue length thresholds for multiple loss priorities

Buffer management schemes are needed in shared-memory packet switches to regulate the sharing of memory among different output port queues and among traffic classes with different loss priorities. Earlier, we proposed a single-priority scheme called dynamic threshold (DT), in which the maximum permissible queue length is proportional to the unused buffering in the switch. A queue whose length equals or exceeds the current threshold value may accept no new arrivals. We propose, analyze and simulate several ways of incorporating loss priorities into the DT scheme. The analysis models sources as deterministic fluids. We determine how each scheme allocates buffers among the competing ports and loss priority classes under overload conditions. We also note how this buffer allocation induces an allocation of bandwidth among the loss priority classes at each port. We find that minor variations in the DT control law can produce dramatically different resource allocations. Based on this study, we recommend the scheme we call OWA, which gives some buffers and bandwidth to every priority class at every port. Scheme OWA has tunable parameters, which we give rules of thumb for setting. Another scheme, called AWA, is also a good choice. It has an allocation philosophy more akin to strict priority and hence is not tunable     

On the compositional dependence of the optical gap and structural properties of amorphous In x Se1−x thin films

The optical gap of the amorphous In _x Se_1–x thin film has been observed to decrease with increasing content of indium in the film (x). An attempt is made to interpret the compositional dependence of the optical gap in amorphous In _x Se_1–x thin film in an alloy-like approach. It has been found that introduction of higher concentrations of indium imparts greater stability to the structure of the indium selenium alloy. From the study of the radial distribution function (RDF) by X-rays it is observed that there is a correlation between the coordination number and the optical gap of indium selenide thin films.     

Investigation of Tool Wear and Surface Finish by Analyzing Vibration Signals in Turning Assab-705 Steel

Various occurrences in machining influence the machining dynamics and thus produce vibration in the cutting tool-workpiece arrangement. In this investigation, with tri-axial accelerometer mounted on the tool-holder in turning ASSAB-705 steel, vibration signals have been captured with and without cutting. The nature of vibrations arising in the cutting tool at different cutting conditions has been investigated. It has been observed that the RMS amplitude of vibration along all three axes for the increasing cutting speed was mixed in nature; however, an increasing trend was noticed in the vibrations along the feed, V_x and radial, V_y directions. The vibration along the main cutting direction, V_z was mixed, initiated by large vibration and then decreased until a particular cutting speed was reached and finally increased steadily. The feed vibration component, V_x has a similar response to the change of the workpiece surface roughness, while the other two components, V_y and V_z have the more coherent response to the rate of flank wear progression throughout the tool life. The natural frequency of different machine parts vibration has been found to be within the band of 0 Hz – 4.2 kHz, whereas the frequencies of different occurrences in turning varied between 98 Hz and 42 kHz.     

Dynamic vulcanization of polyethylene‐based thermoplastic elastomer blends

In this investigation, the effects of blending with ethylene–propylene–diene terpolymer and subsequent dynamic curing with sulfur on the macromolecular structure and properties of pure low‐density polyethylene and high‐density polyethylene were studied. The crosslinking efficiency of polyethylene‐based ethylene–propylene–diene terpolymer blends upon dynamic curing was assessed with torque and gel content measurements. The curing of dispersed ethylene–propylene–diene terpolymer in a polyethylene matrix improved both the mechanical and thermomechanical properties as a result of the formation of a crosslink structure in the rubber phase. In view of the electrical applications of this cured blend material, the volume resistivity was measured. The thermal stability of vulcanized polyethylene/ethylene–propylene–diene terpolymer blends was found to be superior to that of unvulcanized blends. In scanning electron microscopy analysis, good interface bonding between the polyethylene matrix and dispersed ethylene–propylene–diene terpolymer was observed for the cured blends. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Will capacity building training interventions given to street food vendors give us safer food?: A cross-sectional study from India

Successful food hygiene training and the consent of safe food handling practices learnt during training are critical elements in the control of food-borne illnesses throughout the world. It is true for food handlers and vendors belonging to all sectors. But, it is all the more urgent for street vendors because they are more exposed to environmental hazards and are predominantly from much weaker socio-economic backgrounds and yet cater to the general mass. Using a cross-sectional study design a sample of 80 street food vendors were selected and provided with training to evaluate the existing Knowledge, Attitude and Practice (KAP) regarding food safety and hygiene and the change of the same after training interventions. Responses regarding KAP on food safety and hygiene before and after training revealed that there was a significant change in their perception to food safety knowledge and also practices. The knowledge level of the food vendors increased from an average 24.35%–66.2% after training interventions. The overall performance rating of full adoption of good hygiene practices by the vendors ranged from 37.5% to 50.8% in post-training period.