Design and analysis of UW-OFDM signals

Unique word-orthogonal frequency division multiplexing (UW-OFDM) is a novel signaling concept where the guard interval is implemented as a deterministic sequence, the so-called unique word. The UW is generated by introducing a certain level of redundancy in the frequency domain. Different data estimation strategies and the favourable bit error ratio (BER) performance of UW-OFDM, as well as comparisons to competing concepts have already extensively been discussed in previous papers. This work focuses on the different possibilities on how to generate UW-OFDM signals. The optimality of the two-step over the direct approach in systematic UW-OFDM is proved analytically, we present a heuristic algorithm that allows a fast numerical optimization of the redundant subcarrier positions, and we show that our original intuitive approach of spreading the redundant subcarriers in systematically encoded UW-OFDM by minimizing the mean redundant energy is practically also optimum w.r.t. transceiver based cost functions. Finally, we derive closed form approximations of the statistical symbol distributions on individual subcarriers as well as the redundant energy distribution and compare them with numerically found results.     

FastFabric: Scaling hyperledger fabric to 20 000 transactions per second

Blockchain technologies are expected to make a significant impact on a variety of industries. However, one issue holding them back is their limited transaction throughput, especially compared to established solutions such as distributed database systems. In this paper, we rearchitect a modern permissioned blockchain system, Hyperledger Fabric, to increase transaction throughput from 3000 to 20 000 transactions per second. We focus on performance bottlenecks beyond the consensus mechanism, and we propose architectural changes that reduce computation and I/O overhead during transaction ordering and validation to greatly improve throughput. Notably, our optimizations are fully plug‐and‐play and do not require any interface changes to Hyperledger Fabric.     

Free-Standing β-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> Thin Diaphragms

Free-standing, very thin, single-crystal β-gallium oxide (β-Ga₂O₃) diaphragms have been constructed and their dynamical mechanical properties characterized by noncontact, noninvasive optical measurements harnessing the multimode nanomechanical resonances of these suspended nanostructures. We synthesized single-crystal β-Ga₂O₃ using low-pressure chemical vapor deposition (LPCVD) on a 3C-SiC epilayer grown on Si substrate at temperature of 950°C for 1.5 h. The synthesized single-crystal nanoflakes had widths of ～ 2 μm to 30 μm and thicknesses of ～ 20 nm to 140 nm, from which we fabricated free-standing circular drumhead β-Ga₂O₃ diaphragms with thicknesses of ～ 23 nm to 73 nm and diameters of ～ 3.2 μm and ～ 5.2 μm using a dry stamp-transfer technique. Based on measurements of multiple flexural-mode mechanical resonances using ultrasensitive laser interferometric detection and performing thermal annealing at 250°C for 1.5 h, we quantified the effects of annealing and adsorption of atmospheric gas molecules on the resonant characteristics of the diaphragms. Furthermore, we studied the effects of structural nonidealities on these free-standing β-Ga₂O₃ nanoscale diaphragms. We present extensive characterization of the mechanical and optical properties of free-standing β-Ga₂O₃ diaphragms, paving the way for realization of resonant transducers using such nanomechanical structures for use in applications including gas sensing and ultraviolet radiation detection.     

Zutrittskontrolle mit Gesichtserkennung

Firmen&ProdukteDehn Austria

überspannungs-schutz in der Telekommunikation     

Parallel Adder Design with Reduced Circuit Complexity Using Resonant Tunneling Transistors and Threshold Logic

Quantum-effect devices utilizing resonant tunneling are promising candidates for future nano-scale integration. Originating from the technological progress of semiconductor technology, circuit architectures with reduced complexity are investigated by exploiting the negative-differential resistance of resonant tunneling devices. In this paper a resonant tunneling device threshold logic family based on the Monostable-Bistable Transition Logic Element (MOBILE) is proposed and applied to different parallel adder designs, such as ripple carry and binary carry lookahead adders. The basic device is a resonant tunneling transistor (RTT) composed of a resonant tunneling diode monolithically integrated on the drain contact layer of a heterostructure field effect transistor. On the circuit level the key components are a programmable NAND/NOR logic gate, threshold logic gates, and parallel counters. The special properties of MOBILE logic gates are considered by a bit-level pipelined circuit style. Experimental results are presented for the NAND/NOR logic gate.     

Managing diet quality for Cheddar cheese manufacturing milk. 1. The influence of protein and energy supplements.

The effects of supplementing cows' diets with protein and energy on milk composition and the composition and yield of Cheddar cheese were investigated. This research addresses the problems of seasonal reduction in the capacity of cheese curds to expel moisture as observed in parts of south-eastern Australia. Milk was collected from cows offered a basal diet of silage and hay supplemented with different sources and levels of dietary protein and energy. The protein supplements were sunflower, canola, cottonseed meal and lupin, and the energy supplements were maize grain, oats, wheat and barely. This milk was used to manufacture Cheddar cheese on a pilot scale. Cheese moisture content was dependent on the source and level of dietary protein and energy. Milk from cows offered the lupin protein supplements and wheat energy supplements consistently produced cheese with a lower moisture content and moisture in fat-free matter. Milk from these supplemented diets had increased casein concentrations and higher proportions of alpha S2-casein than milk from the poor quality control diet. Cheese yield was directly related to the total casein concentration of milk, but was not influenced by differences in casein composition. Supplementing the cows' diets increased the inorganic P, Mg and Ca concentrations in milk. A low inorganic P concentration in milk from cows offered the control diet was caused by a low intake of dietary P. These findings showed that changes in the mineral and casein composition of milk, associated with diet, could influence the composition of Cheddar cheese.     

Charge transfer in thin films of donor–acceptor complexes studied by infrared spectroscopy

The degree of charge transfer in thin films of organic charge transfer (CT)-complexes, which are deposited via thermal evaporation, is examined via infrared-spectroscopy. We demonstrate a linear relationship between the shift in the excitation energy of the CN-stretching mode of CT-complexes with the acceptor 7,7,8,8-tetracyanoquinodimethane (TCNQ) and the charge transfer. The measured correlation corresponds very well with DFT calculations. For Na-TCNQ we observe a splitting in the peak of the CN-stretching mode, which can be explained by the coupling of two modes and was confirmed by the calculations. In CT-complexes with partial charge transfer the appearance of an electronic excitation is demonstrated.     

Merocyanine/C60 Planar Heterojunction Solar Cells: Effect of Dye Orientation on Exciton Dissociation and Solar Cell Performance

In this study the charge dissociation at the donor/acceptor heterointerface of thermally evaporated planar heterojunction merocyanine/C₆₀ organic solar cells is investigated. Deposition of the donor material on a heated substrate as well as post‐annealing of the complete devices at temperatures above the glass transition temperature of the donor material results in a twofold increase of the fill factor. An analytical model employing an electric‐field‐dependent exciton dissociation mechanism reveals that geminate recombination is limiting the performance of as‐deposited cells. Fourier‐transform infrared ellipsometry shows that, at temperatures above the glass transition temperature of the donor material, the orientation of the dye molecules in the donor films undergoes changes upon annealing. Based on this finding, the influence of the dye molecules’ orientations on the charge‐transfer state energies is calculated by quantum mechanical/molecular mechanics methods. The results of these detailed studies provide new insight into the exciton dissociation process in organic photovoltaic devices, and thus valuable guidelines for designing new donor materials.     

Preparation of Ring-Shaped Thermoelectric Legs from PbTe Powders for Tubular Thermoelectric Modules

Waste heat recovery—for example, in automotive applications—is a major field for thermoelectric research and future application. Commercially available thermoelectric modules are based on planar structures, whereas tubular modules may have advantages for integration and performance in the field of automotive waste heat recovery. One major drawback of tubular generator designs is the necessity for ring-shaped legs made from thermoelectric material. Cutting these geometries from sintered tablets leads to considerable loss of thermoelectric material and therefore high cost. Direct sintering of ring-shaped legs or tubes of thermoelectric material is a solution to this problem. However, sintering such rings with high homogeneity and density faces some difficulties related to the mechanical properties of typical thermoelectric materials such as lead telluride (PbTe)—particularly brittleness and high coefficient of thermal expansion. This work shows a process for production of thermoelectric rings made of p- and n-doped PbTe. Long tubes of PbTe have been sintered in a current-assisted sintering process with specially designed sintering molds, coated with a diffusion barrier, and finally cut into ring-shaped slices. To demonstrate the technology, a tubular thermoelectric module has been assembled using these PbTe rings.     

Recent Advances in Birefringence Studies at THz Frequencies

In the last few years, various studies on terahertz (THz) birefringence have been presented, based on polarization-sensitive THz time-domain spectroscopy. The field of THz birefringence is a wide one covering several aspects, such as different materials exhibiting THz birefringence, polarization-sensitive THz technology, as well as numerous methods for extracting the birefringence properties of a sample from the THz data. Therefore, this paper aims at reviewing recent results on THz birefringence measurements presented in literature, addressing the above aspects and giving an overview of the topic. Moreover, it will focus on the investigation of birefringent fibrous samples, where specific results will be discussed in detail. Altogether, this paper should give a comprehensive view on the recent achievements in the measurements of THz birefringence.