Predicting the Thermal Conductivity of AlSi/Polyester Abradable Coatings: Effects of the Numerical Method

The final target of this study is to achieve a better understanding of the behavior of thermally sprayed abradable seals such as AlSi/polyester composites. These coatings are used as seals between the static and the rotating parts in aero-engines. The machinability of the composite coatings during the friction of the blades depends on their mechanical and thermal effective properties. In order to predict these properties from micrographs, numerical studies were performed with different software packages such as OOF developed by NIST and TS2C developed at the UTBM. In 2008, differences were reported concerning predictions of effective thermal conductivities obtained with the two codes. In this article, a particular attention was paid to the mathematical formulation of the problem. In particular, results obtained with a finite difference method using a cell-centered approach or a nodal formulation allow explaining the discrepancies previously noticed. A comparison of the predictions of the computed effective thermal conductivities is thus proposed. This study is part of the NEWAC project, funded by the European Commission within the 6th RTD Framework programm (FP6).     

An anisotropic solar irradiance model for tilted surfaces and its comparison with selected engineering algorithms

A physically based hourly radiation model for inclined planes is presented. The sky diffuse component is derived from typical radiance patterns for clear and overcast conditions, taking anisotropic effects into account. New developments are also proposed for the ground reflected component, in order to supplement the usual isotropic assumption. The proposed radiation model, called CDRS, may be used with different input data combinations, the relative advantages of which are discussed. CDRS outputs are in good agreement with four clear sky sophisticated spectral data sets when wideband as well as spectral irradiances are input. When compared to measured data, CDRS also appears to perform well during clear and overcast sky conditions. Good results from only two cloudy days are also obtained, but more systematic tests should be conducted in this case. All the five other selected engineering models exhibit some degree of inaccuracy for certain slope/azimuth/cloudiness combinations. Particularly, the ASHRAE and DOE-2 models give catastrophic results for southward vertical surfaces during overcast conditions. This unexpected result may lead to important bias in building energy consumption simulations. Finally, some experimental and computational problems are pointed out. These could interfere with models accuracy comparison in validation studies.     

Sex differences in research funding,productivity and impact: an analysis of Québec university professors

Using the entire population of professors at universities in the province of Quebec (Canada), this article analyzes the relationship between sex and research funding, publication rates, and scientific impact. Since age is an important factor in research and the population pyramids of men and women are different, the role of age is also analyzed. The article shows that, after they have passed the age of about 38, women receive, on average, less funding for research than men, are generally less productive in terms of publications, and are at a slight disadvantage in terms of the scientific impact (measured by citations) of their publications. Various explanations for these differences are suggested, such as the more restricted collaboration networks of women, motherhood and the accompanying division of labour, women’s rank within the hierarchy of the scientific community and access to resources as well as their choice of research topics and level of specialization.     

Space neutron spectrometer design with SSPM-based instrumentation

The compact, robust nature of the CMOS solid-state photomultiplier (SSPM) allows the creation of small, low-power scintillation-based radiation measurement devices. Monitoring space radiation including solar protons and secondary neutrons generated from high-energy protons impinging on spacecraft is required to determine the dose to astronauts. Small size and highly integrated design are desired to minimize consumption of payload resources.RMD is developing prototype radiation measurement and personal dosimeter devices using emerging scintillation materials coupled to CMOS SSPM’s for multiple applications. Spectroscopic measurements of high-energy protons and gamma-rays using tissue-equivalent, inorganic scintillators coupled to SSPM devices demonstrate the ability of an SSPM device to monitor the dose from proton and heavy ion particles, providing real time feedback to astronauts. Measurement of the dose from secondary neutrons introduces additional challenges due to the need to discriminate neutrons from other particle types and to accurately determine their energy deposition. We present strategies for measuring neutron signatures and assessing neutron dose including simulations of relevant environments and detector materials.     

Performance measurements from LYSO scintillators coupled to a CMOS position sensitive SSPM detector

We have designed a 5×5 mm² position sensitive solid-state photomultiplier (PS-SSPM) using a complementary metal-oxide-semiconductor (CMOS) process that provides imaging capability on the micro-pixel level. The PS-SSPM has 11,664 micro-pixels total, with each having an active area and micro-pixel pitch of 30×30 μm² and 44.3 μm, respectively. The PS-SSPM was then examined for its performance characteristics such as its energy and spatial resolution, and LYSO scintillator array imaging capabilities. When coupled to 5×5×3 mm³ LYSO, the energy resolution at 511 keV (²²Na) was measured as a function of bias, and corrected for the PS-SSPM non-linear output. The resolution is 14% (FWHM) at 511 keV with 30 V bias. The LYSO coincidence timing resolution was 9.4 ns (FWHM) at 511 keV. Spatial resolution studies were conducted using a focused (∼30 μm beam spot diameter) pulsed 635 nm diode laser. Scintillator array imaging studies were conducted at 511 keV using a 6×6 LYSO array, having 500 μm pixels (530 μm pitch) and 5 mm tall.     

Crack Tip Opening Displacement in atomistic modeling of fracture of silicon

We analyze the fracture of single crystal silicon simulated by atomistic modeling with ReaxFF first principles based reactive force field. The simulations are performed at three temperatures: 500 K, 800 K and 1200 K, capturing both brittle and ductile behavior for the selected crystallographic orientation with (1 0 0) as the fracture plane. Three failure mechanisms are observed: bond breaking, amorphization and emission of dislocations. We demonstrate that the Crack Tip Opening Displacement (CTOD) gives a realistic estimate of the fracture toughness of brittle fracture, linking continuum mechanics fracture theory with the direct crack tip atomistic approach. We discuss the physics based mechanisms of failure in silicon in view of the CTOD measurements.