Optical tweezers for synchrotron radiation probing of trapped biological and soft matter objects in aqueous environments

Investigations of single fragile objects manipulated by optical forces with high brilliance X-ray beams may initiate the development of new research fields such as protein crystallography in an aqueous environment. We have developed a dedicated optical tweezers setup with a compact, portable, and versatile geometry for the customary manipulation of objects for synchrotron radiation applications. Objects of a few micrometers up to a few tens of micrometers size can be trapped for extended periods of time. The selection and positioning of single objects out of a batch of many can be performed semi-automatically by software routines. The performance of the setup has been tested by wide-angle and small-angle X-ray scattering experiments on single optically trapped starch granules, using a synchrotron radiation microbeam. We demonstrate here for the first time the feasibility of microdiffraction on optically trapped protein crystals. Starch granules and insulin crystals were repeatedly raster-scanned at about 50 ms exposure/raster-point up to the complete loss of the structural order. Radiation damage in starch granules results in the appearance of low-angle scattering due to the breakdown of the polysaccharide matrix. For insulin crystals, order along the densely packed [110] direction is preferentially maintained until complete loss of long-range order.     

Targeted luminescent near-infrared polymer-nanoprobes for in vivo imaging of tumor hypoxia

Polystyrene nanoparticles (PS-NPs) were doped with an oxygen-sensitive near-infrared (NIR)-emissive palladium meso-tetraphenylporphyrin and an inert reference dye which are both excitable at 635 nm. The nanosensors were characterized with special emphasis on fundamental parameters such as absolute photoluminescence quantum yield and fluorescence lifetime. The PS-NPs were employed for ratiometric dual-wavelength and lifetime-based photoluminescent oxygen sensing. They were efficiently taken up by cultured murine alveolar macrophages, yielding a characteristic and reversible change in ratiometric response with decreasing oxygen concentration. This correlated with the cellular hypoxic status verified by analysis of hypoxia inducible factor-1α (HIF-1α) accumulation. In addition, the surface of PS-NPs was functionalized with polyethylene glycol (PEG) and the monoclonal antibody herceptin, and their binding to HER2/neu-overexpressing tumor cells was confirmed in vitro. First experiments with tumor-bearing mouse revealed a distinctive ratiometric response within the tumor upon hypoxic condition induced by animal sacrifice. These results demonstrate the potential of these referenced NIR nanosensors for in vitro and in vivo imaging that present a new generation of optical probes for oncology.     

In situ analysis of three-dimensional electrolyte convection evolving during the electrodeposition of copper in magnetic gradient fields

A novel three-dimensional particle tracking velocimetry technique was used to examine the flow during electrodeposition of Cu. For the first time electrode-normal, circumferential, and radial velocities were spatially resolved during deposition in superimposed low and high magnetic gradient fields. In this way the complex interaction of magnetic field gradient force and Lorentz force induced convective effects could be measured and analyzed. Magnetic field gradient force induced electrolyte flow was detected only in high gradient magnetic fields, and it was found to be directed toward regions of gradient maxima. Since this electrode-normal flow causes enhanced transport of Cu(2+) ions from the bulk electrolyte to those regions of the working electrode where maxima of magnetic gradients are present, a structured deposit is formed during diffusion-limited electrodeposition. Lorentz force driven convection was observed during deposition in the low and the high magnetic gradient experiments. The overall fluid motion and the convection near the working electrode were determined experimentally and discussed with regard to the acting magnetic forces and numerical simulations.     

Rapid, online quantification of H2S in JP-8 fuel reformate using near-infrared cavity-enhanced laser absorption spectroscopy

One of the key challenges in reforming military fuels for use with fuel cells is their high sulfur content, which can poison the fuel cell anodes. Sulfur-tolerant fuel reformers can convert this sulfur into H(2)S and then use a desulfurizing bed to remove it prior to the fuel cell. In order to optimize and verify this desulfurization process, a gas-phase sulfur analyzer is required to measure H(2)S at low concentrations (<1 ppm(v)) in the presence of other reforming gases (e.g., 25-30% H(2), 10-15% H(2)O, 15% CO, 5% CO(2), 35-40% N(2), and trace amounts of light hydrocarbons). In this work, we utilize near-infrared cavity-enhanced optical absorption spectroscopy (off-axis ICOS) to quantify H(2)S in a JP-8 fuel reformer product stream. The sensor provides rapid (2 s), highly precise (±0.1 ppm(v)) measurements of H(2)S in reformate gases over a wide dynamic range (0-1000 ppm(v)) with a low detection limit (3σ = ±0.09 ppm(v) in 1 s) and minimal cross-interferences from other present species. It simultaneously quantifies CO(2) (±0.2%), CH(4) (±150 ppm(v)), C(2)H(4) (±30 ppm(v)), and H(2)O (±300 ppm(v)) in the reformed gas for a better characterization of the fuel reforming process. Other potential applications of this technology include measurement of coal syngas and H(2)S in natural gas. By including additional near-infrared, distributive feedback diode lasers, the instrument can also be extended to other reformate species, including CO and H(2).     

Internal reflection ellipsometry for real-time monitoring of polyelectrolyte multilayer growth onto tantalum pentoxide

Internal reflection ellipsometry was used for detection of the consecutive coating of two polyelectrolytes, poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA), onto a tantalum pentoxide (Ta₂O₅) substrate until the 10th bilayer. The UV patterned PAH-PAA-multilayer was characterized in air via ellipsometry and atomic force microscopy. Suited optical models enabled the determination of the layer thicknesses in wet and dry states. Linear multilayer formation could be proved by Attenuated Total Reflection — Fourier Transformed Infrared Spectroscopy measurements following the increase of the ν(C=O) band depending on the adsorption of the PAA. Streaming potential measurements after each layer deposition step indicated a change in surface charge after each layer deposition due to the consecutive coating of PAH and PAA. In this article the internal reflection ellipsometry is shown to be a convenient possibility to analyze the modification of a thin transparent Ta₂O₅ substrate.