Generating Web Traffic Based on User Behavioral Model

Generating web traffic is of great importance to analyze performance of new designed network, test new equipment, and verify new protocols, etc.. However, most existing traffic generation systems tend to simulate the overall characteristics of network traffic, while neglecting of the behavior of the individual users. Nevertheless, in principle, the emerged characteristics of overall traffic originate from the aggregation of individual users＇ access behavior. In this paper, we propose an innovative web traffic generating method based on user browsing behavior. Our method simulates the real users＇ accessing behavior, and visits the real web servers. Then, we design and develop a web traffic generating system. Because our system accesses the real websites, it can produce almost the real network traffic. The test results show that the traffic generated by our system has characteristics of burstiness and self-similarity, which are widely found and characterized in many real networks. In addition, our system can better reflect real user＇s web browsing behavior.     

Effect of incipient removal of hydrogen through palladium membrane on the conversion of methane steam reforming: Experimental and modeling

This paper presents a mathematical model based on the reaction rate expressions to describe the displacement of methane conversion in the steam reforming. The effect of several parameters including weight hourly space velocity (WHSV), load-to-surface ratio, reaction pressure, hydrogen partial pressure in permeate side and reaction temperature were investigated. Simulation and experimental results showed that a conversion higher than 80% could be achieved in a palladium membrane reactor at reaction temperature of 500 °C relative to 850 °C in a conventional fixed bed reactor (FBR). Besides, the yield of CO (<2%) in membrane reactor was much lower than that (>50%) in the FBR, which indicated the significant depression of CO production in use of membrane reactor.     

LIQUID PHASE TRANSPORT PROPERTIES IN A HIGH PRESSURE PACKED COLUMN

A mathematical model of fluid flow and mass transfer in a packed bed was derived and used to evaluate the liquid phase axial dispersion and mass transfer coefficients under high pressure conditions. The least-squares method was used to evaluate the rate parameters from experimental breakthrough curves, and the agreement between the concentration curves predicted from rate parameters and those measured experimentally was good. Experiments were performed at 20 and 200°C with water as a solvent and nonporous soda-lime glass beads as packing. Although the axial dispersion coefficient was independent of temperature and pressure, the mass transport parameters were found to be pressure dependent.     

The viscoelastic properties of rubber–resin blends. III. The effect of resin concentration

The viscoelastic properties of a rubber–resin blend, which influences performance of the blend as a pressure-sensitive adhesive, depend upon the structure of the resin as well as its molecular weight. The effect of the concentration of a compatible resin in the blend was examined using a mechanical spectrometer. Four types of resins were used. These are the rosin esters, polyterpenes, pure monomer resins such as polystyrene and poly(vinyl cyclohexane), and petroleum stream resins. Each was examined in blends with both natural rubber and styrene–butadiene rubber over a range of concentrations. It is shown that the temperature of the tan δ peak for compatible systems can be predicted by the Fox equation, T = W₁T + W₂T, where W₁ and W₂ are the weight fractions of the resin and rubber, respectively, and the T_g's are the tan δ peak temperatures in K. The plateau modulus G for a blend can be identified as the G′ value in the rubbery plateau at the point where tan δ is at a minimum. The relationship between G and G, the plateau modulus for the undiluted elastomer, is shown to be proportional to the volume fraction of the elastomer raised to the 2.3–2.4 power for natural rubber with six different compatible resins. The exponent for styrene–butadiene rubber is 2.5–2.6 with four different resins. Using these relationships, both the tan δ peak temperature and plateau modulus can be predicted for a rubber–resin system from data on the unmodified elastomer and on one typical rubber–resin blend.     

Relay selection with feedback beamforming information through designed sector sweep report frame for mmWave WPANs

This paper proposes a novel relay selection strategy based on the feedback beamforming （BF） information through designed sector sweep （SSW） report frame for millimeter-wave （mmWave） wireless personal networks （WPANs）. First, an SSW report frame compatible with IEEE 802.11ad standard is designed. Second, an approach collecting instantaneous channel state information （CSI） overheard during BF is devised. Third, with the aim of minimizing the outage probability and maximizing the overall network throughput capacity, the optimal relay selection issue for non-line-of-sight （NLoS） links is formulated as a bipartite graph, and Kuhn Munkres （KM） algorithm is provided to resolve it. Both theoretical analysis and simulation results show, with CSI considering NLoS conditions and selected relays according to the overall network throughput capacity maximization principle, the improvements achieved over opportunistic relay selection strategy in terms of overall network throughput capacity and outage probability with minimal modifications to IEEE 802.1lad.     

4G通信技术的FPGA远程更新系统设计

为了解决在恶劣环境、偏远地区等特殊场合的FPGA远程更新问题,提出了一种基于4G无线通信技术的FPGA远程更新系统设计方法。应用4G无线通信模块实现了更新控制器的通信组网,远程控制器通过4G网络与更新控制器建立通信连接,下发控制命令实现FPGA的远程更新。通过实际测试验证了新方法的可行性、正确性,有效弥补了传统更新方法布线复杂、效率低、距离短等不足,提高了设备维护效率、降低了维护成本,对工程应用具有重大意义。     

Design of a broadband dielectric resonator antenna and its application in low sensitivity frequency beam‐scanning array with wide scanning angle and suppressed sidelobes

In this paper, a broadband dielectric resonator antenna (DRA) with a simple H‐slot feeding structure is proposed. The broad bandwidth (~45%) and uni‐directional radiation enable this DRA suitable to work as a radiation element in the construction of a beam‐scanning array with not only low frequency sensitivity which is important for accurate angle estimation of in‐coming targets, but also a wide scanning range. Moreover, stable coupling coefficients are established around all the above three resonances with respect to its corresponding feeding line, ensuring a low sidelobe level (SLL) across the whole operating frequency range. In order to realize such a DRA, a latticed rectangular structure is utilized to generate the lower two resonances, while the upper resonance is generated by its H‐shaped feeding slot. The shape of the latticed dielectric resonator is also modified according to a 3‐D printed fixing structure for an accurate installation. A 20‐element beam‐scanning prototype is demonstrated and manufactured. The range of scanning angle is from ?36° to +13° within the bandwidth of 10 to 16 GHz, corresponding to a frequency sensitivity of only 122.5 MHz/^o. The achieved SLL are smaller than 19 dB for all scanning beams. The above performance indicates that, this array is very suitable for near‐range radar systems requiring an accurate angle estimation.     

Satellite-Based Water Quality Mapping from Sequential Simulation with Parameter Outlier Removal

The satellite-based regression model provides the data model that identifies water quality for inland and coastal waters. However, the satellite regression usually depends on the selection of observation, satellite data, and model type. A resampling simulation technique, such as sequential simulation using geographically weighted regression (GWR simulation), can be applied in generating multiple realizations for water quality estimation to reduce the sampling effect and consider spatial heterogeneity. Traditional models often result in considerable underestimation in extreme observations. The GWR simulation provides the best goodness of fit and spatial varying relationship between observed water quality and remote sensing considering parameter outlier and noise removal for parameter stability. This simulation model can increase the sampling diversity from various observations and reduce the neighboring effects of observations using outlier and noise removal. The model that handles spatial uncertainty and heterogeneity is a novel tool for inferring the characteristics of water quality from a series of sample subsets.

     

Influence of static pre-loading on the dynamic bending strength of concrete with particle element modeling

Experimental tests show that static pre-loading has a significant effect on the dynamic strength of concrete.Based on meso-scale particle element model,numerical simulations of dynamic bending tests with pre-loading are performed.Complete stress–strain relationships are then obtained.Significant increase in dynamic strength is found when the pre-loadings are imposed within the elastic limit of concrete.However,when the imposition of pre-loadings reaches the plastic or softening range,dynamic strengths may gradually decrease along with the increase in pre-loadings.The distribution of energy components and the failure modes are discussed to explain the mechanisms of the phenomena.