Dispersion and thermal conductivity of carbon nanotube composites

A mechanical method was used to shorten carbon nanotubes (CNTs) for improving dispersion without reducing their thermal conductivity. Single walled carbon nanotubes (SWCNTs) were mechanically cut to produce short and open-ended fullerene pipes. These shortened SWCNTs were then used in polymer composites. Both atomic force microscopy and scanning electron microscopy characterizations suggested that nanotube shortening significantly improved CNT dispersion. Thermal conductivity of composites containing short CNTs were found to be much better than those containing pristine CNTs.     

Modeling and analysis of thickness gradient and variations in vacuum‐assisted resin transfer molding process

As vacuum‐assisted resin transfer molding (VARTM) is being increasingly used in aerospace applications, the thickness gradient and variation issues are gaining more attention. Typically, thickness gradient and variations result from the infusion pressure gradient during the process and material variations. Pressure gradient is the driving force for resin flow and the main source of thickness variation. After infusion, an amount of pressure gradient is frozen into the preform, which primarily contributes to the thickness variation. This study investigates the mechanism of the thickness variation dynamic change during the infusion and relaxing/curing processes. A numerical model was developed to track the thickness change of the bagging film free surface. A time‐dependent permeability model as a function of compaction pressure was incorporated into an existing resin transfer molding (RTM) code for obtaining the initial conditions for relaxing/curing process. Control volume (CV) and volume of fluid (VOF) methods were combined to solve the free surface problem. Experiments were conducted to verify the simulation results. The proposed model was illustrated with a relatively complex part. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Studying protein–ligand interactions using protein crystallography

Protein X-ray crystallography is now a relatively high-throughput technique that plays a major role in structure-based drug design programs where the method of soaking small organic ligands into protein crystals is used to confirm or identify binding modes. In this review, we discuss some experimental approaches for ‘soaking-in’ ligands into protein crystals where the major problem is poor solubility of the ligand. We also provide examples showing how crystal soaking can be used as a technique for establishing ligand binding strength: K _c (the apparent ligand–protein dissociation constant in the crystal), which for some proteins at least, is found to be very similar to the solution K _d. Kinetic effects are also found to be important and the rate at which ligands soak into crystals is shown to vary by orders of magnitude from 10^?1 to 10⁷?s depending on the system.     

The Resistance of Electrodeposits to Corrosion,with Special Reference to Cadmium and Zinc

This paper describes measurements which have been made of the diffusion of hydrogen through mild steel and through steel to composition DTD4A during cathodic treatment in various sulphuric acid and sodium hydroxide electrolytes. The apparent hydrogen diffusion varies over wide limits between various electrolytes. For mild steel, the effect of cold work on diffusion rate differs between acid and alkaline electrolytes. The variations in diffusion rate are ascribed to the formation of cathodic films which affect the rate of transfer of hydrogen atoms into the metal lattice.

The quantity of hydrogen required to cause embrittlement of steel is very much less than that required to saturate the steel.     

Viscosity measurements and empirical predictions for fluxed Australian bituminous coal ashes

Recent interest in the suitability of Australian bituminous coals for use in integrated gasification-combined cycle (IGCC) technologies has provided the opportunity to determine viscosity data for a range of coal ashes slags fluxed with limestone at the tapping temperatures of entrained flow gasifiers. Experimental viscosity measurements have been made over a range of slag compositions covering the anorthite region at the 0–2.5, 2.5–5, 5–7.5 and 7.5–10 wt% FeO levels of the quaternary SiO₂–Al₂O₃–CaO–FeO system. Contour plots of viscosities at 1450°C for the four FeO ranges are presented as an example for predicting slag behaviour in entrained flow gasifiers. The viscosity measurements have also been fitted empirically using a modified Urbain treatment to give separate models for the four FeO levels. Polynomial expressions are given for the evaluation of viscosities covering the temperature range 1400–1550°C for slags within the compositional range used in the derivation.     

Serum levels of polybrominated diphenyl ethers (PBDEs) in foam recyclers and carpet installers working in the United States

Increased exposure to the flame retardants known as polybrominated diphenyl ethers (PBDEs) may be expected to occur during the recycling of polyurethane foam containing these chemicals. To date, no studies in the United States have investigated occupational exposure to these flame retardants during recycling processes. The objective of the present study was to determine if individuals working in foam recycling facilities, and/or carpet installers who may install carpet padding manufactured from recycled foam, possess significantly higher PBDE serum levels relative to that of the general U.S. population. As a control group, serum was collected from four spouses and one clerical worker. In addition, levels in workers were also compared to the recently published national health and nutrition examination survey (NHANES) data set on PBDEs in the general U.S. population. Serum samples were collected in duplicate and analyzed by two different laboratories as quality control. Total PBDE levels were found to be significantly higher (p < 0.05) in the individuals recycling foam and installing carpet (n = 15) relative to the control group (n = 5). Median sigmaPBDE levels in the foam recyclers, carpet layers, and control group were 160, 178, and 19 ng/g lipid, respectively. In contrast, concentrations of a polybrominated biphenyl (BB-153) and a polychlorinated biphenyl (CB-153) were equivalent among all groups tested. The PBDE congeners BDE-47, 99, 100, and 153 contributed 90% of the sigmaPBDE concentration in serum and no differences in congener patterns were apparent among the different groups. Relative to concentrations measured in the NHANES, foam recyclers and carpet layers have body burdens that are an order of magnitude higher. These data suggest individuals recycling foam-containing products, and/ or using products manufactured from recycled foam (i.e., carpet padding), have higher body burdens of PBDEs, and thus may be at higher risk from adverse health effects associated with brominated flame retardant exposure.     

An evaluation of the policy and techno-economic factors affecting the potential for biogas upgrading for transport fuel use in the UK

Gaseous biofuels including biomethane, which has been shown to be more environmentally beneficial than liquid biofuels, should contribute to meeting the challenging UK targets set for the supplying of biofuels to the road transport fuel market. Under the Renewable Transport Fuel Obligations the financial incentives for the supply of biofuels have been volatile, e.g. 2008/2009 saw Renewable Transport Fuel Certificate values fall to zero. Any shortfall from the maximum value has significant implications for all biofuels. It is demonstrated that biomethane can be produced at a cost which is competitive with liquid biofuels and fossil fuels within the UK. Technologies such as water scrubbing, pressure swing adsorption and physical and chemical absorption are available to upgrade biogas generated by anaerobic digestion of organic wastes to transport fuel quality, and technologies such as membrane separation and cryogenic distillation are being modified for such an application. The manufacture and sale of biomethane as a transport fuel is also financially competitive with Combined Heat and Power. One limiting factor may be the additional cost of purchasing and maintaining biomethane fuelled vehicles. Support in this area could lead to the rapid expansion of biomethane transport fuel infrastructure and bring significant long term environmental and economic advantages.     

Brominated flame retardants in serum from U.S. blood donors

Serum samples collected in 1988 from U.S. blood donors were analyzed for polybrominated diphenyl ethers (PBDEs) and polychlorinated and polybrominated biphenyls (PCBs and PBBs). The levels of the PBDEs are reported for the first time in serum from the U.S. population. The median concentrations and range of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47); 2,2',4,4',5,5'-hexabromodiphenyl ether (BDE-153); 2,2',3,4,4',5',6-heptabromodiphenyl ether (BDE-183); and decabromodiphenyl ether (BDE-209) were 1.3 (<0.8-49); 0.54 (0.13-3.1); 0.24 (0.12-1.8); and <1 (<1-35) pmol/g lipid weight (l.w.), respectively. In addition we also measured detectable levels of nine additional PBDE congeners in many of the serum samples. The median concentrations and ranges of 2,2',4,4',5,5'-hexachloro- and hexabromobiphenyl (CB-153 and BB-153) were 190 (21-2600) and 19 (4.2-84) pmol/g l.w. The levels of PBDEs and CB-153 found in the U.S. samples were similar to background levels reported in the serum of Swedish hospital cleaners collected 10 years later, i.e., 1997. The BB-153 congener measured in the U.S. samples was not found in the Swedish samples. The difference in exposure to this congener could not be assessed in this study, although might be related to the 1973 BB-153 (FireMaster BP-6) animal and human contamination incident in the State of Michigan.     

Managing rivers under changing environmental and societal boundary conditions,Part 1: National trends and U.S. Army Corps of Engineers reservoirs

Most major rivers in the United States are managed by a system of reservoirs; many of which were built more than a half century ago. These reservoirs were designed based on environmental, societal, and regulatory assumptions at the time of construction. Since then, we have learned that climate is not stationary, population growth is being decoupled from energy needs and water demand, and new regulations (such as the Clean Water Act and Endangered Species Act) affect how river systems are managed. This study explores changing environmental, societal, and regulatory conditions relevant to the design and operation of U.S. Army Corps of Engineers reservoirs across the conterminous United States. Results demonstrate large geographic variability in how these conditions have changed over time. In the south‐western United States, there is an amplified trend towards drier conditions and less reservoir flexibility with warmer temperatures, less precipitation, high sedimentation rates, and large population growth. In the north‐eastern United States, the impacts of increased temperature on reservoirs may be masked by greater precipitation and lower water demand. Environmental, societal, and regulatory changes can reduce the flexibility of reservoir operations and, in some instances, make it challenging for the reservoir to meet its intended purpose as designed decades ago. This study is the first step towards formalizing a process for monitoring broad trends relevant to water resources management for the purpose of moving towards adaptation of infrastructure. An interactive tool was developed for each condition: https://nicholasinstitute.duke.edu/reservoir‐national‐trends/ .     

The fate of Listeria monocytogenes during the manufacture of Camembert-type cheese: A comparison between raw milk and milk treated with high hydrostatic pressure

Camembert-type cheese was produced from: raw bovine milk; raw milk inoculated with 2 or 4 log CFU/ml Listeria monocytogenes; raw milk inoculated with L. monocytogenes and subsequently pressure-treated at 500 MPa for 10 min at 20 °C; or uninoculated raw milk pressure-treated under these conditions. Cheeses produced from both pressure-treated milk and untreated milk had the typical composition, appearance and aroma of Camembert. Curd and cheese made from inoculated, untreated milk contained large numbers of L. monocytogenes throughout production. An initial inoculum of 1.95 log CFU/ml in milk increased to 4.52 log CFU/g in the curd and remained at a high level during ripening, with 3.85 log CFU/g in the final cheese. Pressure treatment inactivated L. monocytogenes in the raw milk at both inoculum levels and the pathogen was not detected in any of the final cheeses produced from pressure-treated milk. Therefore high pressure may be useful to inactivate L. monocytogenes in raw milk that is to be used for the production of soft, mould-ripened cheese.

Industrial relevance

This paper demonstrates the potential of high pressure (HP) for treatment of raw milk to be used in the manufacture of soft cheeses. HP treatment significantly reduced the level of Listeria monocytogenes in the raw milk and so allowed the production of safer non-thermally processed camembert-like soft cheese.