NANO-MULTILAYERS WITH HIGH PERPENDICULAR ANISOTROPY FOR MAGNETIC RECORDING

(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106 J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25m3, showing the promising of being the recording medium for future high density perpendicular recording.     

Application of tight-binding electronic theory to phase stability and mechanical properties of intermetallic compounds

The phase stability and mechanical properties of ordered intermetallic compounds are investigated using the tight-binding (TB) electronic theory. The authors use the semiempirical TB method (for the lattice-relaxation calculations), as well as the first principles TB-LMTO approach based on the density-functional theory. The authors focus their attention on the strength anomaly in IVa-VIII intermetallic compounds with B2 structure. It has been shown experimentally that CoTi, CoZr, and CoHf display the positive temperature dependence of yield stress at intermediate temperatures while FeTi does not have their characteristics, depending on the position of the alloying elements in the periodic table. The observed strength anomaly operating at intermediate temperatures is discussed in conjunction with the relative phase stability of B2 structure with respect to B_f or B₁₉ phase and dislocation core structures.     

Synthesis and characterization of mechanical-alloyed Ti–xMg alloys

The synthesis and characterization of Ti–xMg (x=4, 9, 12, 15, 21, 24 at%) alloys using mechanical alloying was investigated. A nanometer-sized Ti–24Mg alloy was produced. During mechanical alloying, the height of the XRD peaks of the Mg in the Ti–9Mg alloy decreased, and then disappeared, whereas the Ti XRD peaks broadened, and the grain size decreased with increasing milling time. The Mg firstly dissolved in the grain boundaries of the Ti, and then diffused into the Ti grain interiors. The grain boundaries played an important role in enhancing the solid solubility of Mg in Ti. With increasing Mg content the volume fraction of grain boundaries increased, and a decrease in grain size occurred after mechanical alloying for 48 h.     

Assessment of Manufacturing Operational Complexity

The manufacturing system must balance human characteristics, needs, skills and capabilities within the technical and business environment, in order to be effective and successful. A Systems Analysis and Design approach was utilized to integrate manufacturing technologies with the capabilities of human workers, in order to augment the performance of both. A framework was created on which to build systems analysis tools that focus on realistic factors within the manufacturing environment, such as information quantity, diversity and content; complexity (product, process and operational); task effort, and so forth. A matrix methodology and an objective measure of complexity have been developed that assess the three levels of manufacturing complexity: product complexity, process complexity and operational complexity. The focus of this paper is the ‘operational complexity’ and it provides insight into the system performance and sensitivities when considering human characteristics.     

Macrosegregation in ESR and VAR Processes

The method of heat generation, heat transfer characteristics, and ingot structure are very different in the VAR and ESR processes, which result in different tendencies and mechanisms for macrosegregation formation in forged IN-718. Freckles are niobium rich and can be generated in both ESR and VAR, with higher incidence in ESR than VAR. White spots are niobium lean and can only be found in VAR-processed materials. Freckles are indige-nous in nature, and result from the flow of solute-rich interdendritic liquid in the mushy zone during solidification. The most plausible cause for white spots is exogenous material, which remains unmelted, falling into the molten pool. The best way to minimize the formation of freckles is to improve the ingot heat transfer rate, a more difficult task in ESR than in VAR.     

Diffusion in gold and Au-Ag alloys

The self-diffusion coefficients of gold in pure gold and alloys of gold and silver have been measured over a range of temperatures. Chemical interdiffusion coefficients have been measured on pure metal and incremental couples, but are of lower accuracy because of the development of porosity. The results are compared with earlier work and internally on the basis of Darken’s equations.     

Corrosion and wear properties of multipurpose coatings deposited by ion-beam-assisted deposition

Electrochemical measurements and wear tests were performed on aluminium and aluminium alloy coatings containing magnesium for uniform and local pitting corrosion protection of low carbon steel substrates. Final hard chromium nitride and aluminium nitride layers were deposited at the surface of the protective films in order to lower friction and wear. The results show that wear and corrosion protection can be improved by use of bifunctional multilayers. The coatings for multipurpose application were generated by ion-beam-assisted deposition. The defined intrinsic film stress controlled by the ion-to-atom arrival ratio influences the corrosion properties. Increasing the ion-to-atom ratios usually improves the corrosion resistance.     

Rotating Heat Exchangers and the Optimization of a Heat Pump

Flow and heat transfer conditions are investigated on rotating flat plates and on blades of tangential blowers. The solution of the three dimensional boundary layer equations for rotating flat plates show that 3-D effects are of influence only in the neighborhood of the axis of rotation. The conditions outside this region can be treated as flow in a 2-D system. The measurements indicate that turbulent flow exists already at Re-values much smaller than Reclit for stationary flat plates. As a result of this, high heat transfer rates can be achieved at lower average velocities. All data taken on rotating flat plates and on the blades of a tangential blower can be correlated by a single dimensionless relationship. The results obtained by theory and measurements are used to derive design curves for the construction of a heat pump. A device built in accordance to these curves performed as predicted. Discussed are also rotating furnaces, radiators and condensers for vapor driven engines.     

Mass transfer at the gas evolving inner electrode of a concentric cylindrical reactor

Mass transfer coefficients for an oxygen evolving vertical PbO₂ coated cylinder electrode were measured for the anodic oxidation of acidified ferrous sulphate above the limiting current. Variables studied included the ferrous sulphate concentration, the anode height, the oxygen discharge rate and the anode surface roughness. The mass transfer coefficient was found to increase with increasing O₂ discharge rate,V, and electrode height,h, according to the proportionality expressionK V ^0.34 h ^0.2. Surface roughness with a peak to valley height up to 2.6 mm was found to increase the rate of mass transfer by a modest amount which ranged from 33.3 to 50.8% depending on the degree of roughness and oxygen discharge rate. The present data, as well as previous data at vertical oxygen evolving electrodes where bubble coalescence is negligible, were correlated by the equationJ=7.63 (Re. Fr)^–0.12, whereJ is the mass transferJ factor (St. Sc ^0.66).Notation a ₁,a ₂ constants - A electrode area (cm²) - C concentration of Fe²⁺ (M) - d bubble diameter (cm) - D diffusivity (cm² s^–1) - e electrochemical equivalent (g C^–1) - F Faraday's constant - g acceleration due to gravity (cm s^–2) - h electrode height (cm) - I _Fe ²⁺ current consumed in Fe²⁺ oxidation A - I _{o 2} current consumed in O₂ evolution, A - K mass transfer coefficient (cm s^–1) - m amount of Fe²⁺ oxidized (g) - P gas pressure (atm) - p pitch of the threaded surface (cm) - Q volume of oxygen gas passing any point at the electrode surface (cm³ s^–1) - R gas constant (atm cm³ mol^–1 K^–1) - r peak-to-valley height of the threaded surface (cm) - t time of electrolysis (s) - T temperature (K) - solution viscosity (g cm^–1 s^–1) - V oxygen discharge velocity as defined by Equation 3 (cm s^–1) - Z number of electrons involved in the reaction - Sh Sherwood number (Kd/D) - Re Reynolds number (Vd/) - Sc Schmidt number (v/D) - J mass transferJ factor (St. Sc ^0.66) - St Stanton number (K/V) - Fr Froude number (V ²/dg) - Solution density, g cm^–3 - v Kinematic viscosity (cm² s^–1) - bubble geometrical parameter defined in [31] - fractional surface coverage - diffusion layer thickness (cm)     

Mass-Balance Model of Pulmonary Oxygen Transport

A dynamic lumped-parameter model for pulmonary gas transport has been developed to characterize the lung and predict the effect of various parameter changes. The gas side of the lung is modeled as a series and parallel arrangement of five perfectly mixed, variable-volume compartments that correspond roughly to airway and alveolar regions. The blood side of the lung is modeled as a series of perfectly mixed, constant-volume compartments that represent the pulmonary capillary bed. From nonsteady mass balances, equations are derived which yield the time course of concentration for each compartment. Model simulations indicate that the oxygen-hemoglobin reaction does not reach equilibrium in the pulmonary capillaries, an assumption commonly made in analyses of pulmonary oxygen transport. Simulations also show the extent to which breathing amplitude and rate can affect the oxygen level in the blood leaving the lung. A comparison of simulations for a normal state and chronic obstructive lung disease (COLD) with identical input conditions demonstrates that the oxygen level in the blood leaving the lung is much lower in COLD. Also, the simulations are compared with experimental findings.