Optimization and Validation of a UV–HPLC Method for Vitamin C Determination in Strawberries (<Emphasis Type="Italic">Fragaria ananassa</Emphasis> Duch.), Using Experimental Designs

Vitamin C or total ascorbic acid (TAA) in fruits can be assumed as ascorbic acid (AA) plus dehydroascorbic acid (DHA) content. The aim of this work was to optimize and validate, using experimental designs, a new high-performance liquid chromatographic method for vitamin C determination in strawberries. The mobile phase (MP) consisted of a 0.03 M sodium acetate/acetic acid buffer, 5% methanol. For optimization, a Box–Behnken design was used (three factors at three levels: (a) pH of MP, 3.8–5.8; (b) wavelength, 240–270 nm; and (c) flow rate, 0.5–1.2 ml min⁻¹). Responses were: AA and TAA areas, peak widths, and retention times. A global optimization was performed using the Derringer desirability function, and a value of 0.84 was reached for the combination of design factors: A = 5.8, B = 251 nm, and C = 1.15 ml min⁻¹. Method validation, using AA standard solutions, included: linearity study, limits of detection and quantification, and calibration and analytical sensitivity quantifications. Precision and accuracy were studied in strawberry extracts. The coefficients of variation (percent) were: AA, 1.5%; TAA, 1.8%, and DHA, 4.9%. Accuracy was evaluated with AA standard spiked in 30–150% range of the expected amount of analyte in real samples. The joint confidence elliptical region test and t test were employed for the study of the difference between recoveries (percent) and the ideal 100%. The robustness was analyzed using a fractional factorial design (3⁴⁻²), and an AA recovery study after slight changes in operative variables was performed. The results indicate that the optimized method was linear, sensible, precise, accurate, and robust.     

Varietal Differentiation of Grape Juice Based on the Analysis of Near- and Mid-infrared Spectral Data

The aim of this study was to evaluate the usefulness of visible (VIS), near-infrared reflectance (NIR) and mid-infrared (MIR) spectroscopy combined with pattern recognition methods as tools to differentiate grape juice samples from commercial Australian Chardonnay (n = 121) and Riesling (n = 91) varieties. Principal component analysis (PCA), partial least squares discriminant analysis and linear discriminant analysis (LDA) were applied to classified grape juice samples according to variety based on both NIR and MIR spectra using full cross-validation (leave-one-out) as a validation method. Overall, LDA models correctly classify 86% and 80% of the grape juice samples according to variety using MIR and VIS-NIR, respectively. The results from this study demonstrated that spectral differences exist between the juice samples from different varietal origins and confirmed that the infrared (IR) spectrum contains information able to discriminate among samples. Furthermore, analysis and interpretation of the eigenvectors from the PCA models developed verified that the IR spectrum of the grape juice has enough information to allow the prediction of the variety. These results also suggested that IR spectroscopy coupled with pattern recognition methods holds the necessary information for a successful classification of juice samples of different varieties.     

Use of Protein Hydrolysate from Yellow Stripe Trevally (<Emphasis Type="Italic">Selaroides leptolepis</Emphasis>) as Microbial Media

The objective of this study was to investigate the potential use of protein hydrolysate from yellow stripe trevally as a nitrogen source for the growth of different microorganisms. Protein hydrolysates from yellow stripe trevally with different degrees of hydrolysis (5, 15 and 25%) prepared using Alcalase (HA) or Flavourzyme (HF) were determined in comparison with commercial Bacto Peptone. For bacteria, Staphylococcus aureus and Escherichia coli, HF with 25% DH (HF₂₅) yielded the highest cell density and specific growth rate (μ _max) and the lowest generation time (t _d) (p?Saccharomyces cerevisiae and Candida albicans, Bacto Peptone yielded the higher growth rate than did HA and HF (p?μ _max and t _d were observed for fungus, Aspergillus oryzae (p?>?0.05). The pH of culture broth containing HF₂₅ decreased markedly during the first 8 hours of cultivation of S. aureus and E. coli (p?S. aureus (p?25 rendered the similar growth and colony size of S. aureus (p?>?0.05), compared with that containing Bacto Peptone. Scanning electron microscopic study revealed no differences in size and shape of microorganisms cultured in HF₂₅ and Bacto Peptone (p?>?0.05).     

Co-production of Lactic Acid and <Emphasis Type="Italic">Lactobacillus rhamnosus</Emphasis> Cells from Whey Permeate with Nutrient Supplements

Lactic acid and cell production from whey permeate by Lactobacillus rhamnosus with different nutrient supplements were investigated in this study. Yeast extract was identified as the most effective nutrient affecting lactic acid production. Increase in inoculum size from 0.05% to 1% (v/v) resulted in a substantial increase in lactic acid productivity from 0.66 to 0.83 g L⁻¹ h⁻¹ (P < 0.001). The optimal temperature for lactic acid production was 37 °C, while the highest cell production was obtained at 42 °C. When whey permeate and yeast extract concentrations were 6.8% (w/v) and 3 g L⁻¹, respectively, lactic acid productivity reached 0.85 g L⁻¹ h⁻¹ after 48-h cultivation, which is 3.40 times of those without nutrient supplements.     

Investigation of modified water glass as adhesive for wood and particleboard: mechanical,thermal and flame retardant properties

Water glass (WG) is an inorganic binder with excellent fire resistance in porous materials but has limited application to wood bonding. In this work, modified WG adhesive was developed and the effect of modification on the properties of adhesive and particleboard bonded with it was investigated. The bonding strength of WG adhesives increased by the modification with boric acid and aminofunctional silane. Stable siloxane linkage can lead to enhanced bonding. Particleboards with modified WG were manufactured with a target density of 750 kg m^?3. The silane was selected as the best modifier; it was the only one to meet the requirements of EN 312 (Type 2). The reaction of amino groups onto the surface of wood was confirmed by Fourier-transform infrared spectrum. All particleboards produced with WG adhesives showed resistance to fire comparable to those with urea formaldehyde in the combustion test for 30 min. As a result of this investigation, WG modified with silane could be a desirable alternative to current synthetic adhesives for wood composites and fire resistance application.     

An optical method for rapid examination of check development in decorative plywood panels

Common methods for assessment of surface checking in decorative plywood panels rely on manual handling and visual inspection of specimens, a laborious procedure practically limiting the number of materials and variables that may be considered within one project. In this study, a new automated optical method for detection and measurement of checks has been developed. This method was based on the digital image correlation principle, which allowed identification of checks as small as 0.2 mm wide and 1 mm long. Continuous measurement allowed reliable check counts, and measurement of check dimensions as they develop during exposure to drying conditions. A check severity index has been proposed. The method has been validated in exposure tests conducted in harsh but realistic conditions, to increase the likelihood of checking and reduce the test duration to 4 h. In addition, an innovative test setup allowed near simultaneous monitoring of check development in up to 48 panel specimens sized 30?×?30 cm. The efficiency of the method allows studies to examine an unprecedented number of treatments and replicates.     

Kinematic characterization of the pressure-dependent PCM impregnation process for radiata pine wood samples

This paper reports on the properties of Pinus radiata wood impregnated with an organic phase change material (O-PCM). The tests are aimed at characterizing the kinetics of impregnation (rates, flows, and fronts) and the thermophysical properties (thermal conductivity and specific heat). In particular, a paraffin type O-PCM (octadecane) is used to impregnate dry radiata pine wood in the tangential flow direction at four manometric pressures (0, 1, 2, and 3 bar) and constant temperature of 50 °C. The wood is sapwood from 12-year old P. radiata growing in the Bío-Bío region and dimensioned according to Chilean standard for treated wood sample extraction. The results show that it is viable to impregnate P. radiata wood with O-PCM to improve its thermophysical properties with the purpose of passive conditioning.     

Jumbo squid (<Emphasis Type="Italic">Dosidicus gigas</Emphasis>) quality enhancement using complex bio-preservative during cold storage

Effects of chitosan combined with nisin on quality enhancement in jumbo squid (Dosidicus gigas) were investigated during cold storage (4?±?1 °C). 1% chitosan combined with different concentrations of nisin (0, 2 and 6 g/L) were utilized as preservatives. Changes in human sensory evaluation, GC–MS, total variable counts, and physiochemical indexes, including weight loss, colour, total volatile basic nitrogen and K value, were synchronously measured. Results demonstrated that 1% chitosan combined with 6 g/L nisin maintained high sensory scores, low moisture loss and volatile spoilage products. The optimized method also inhibited microbial propagation, nutrient (protein, nucleotides, etc) degradation, etc. This method is promising in aquatic products quality preservation.     

Screening of the phenolic profile and their antioxidative activities of methanol extracts of <Emphasis Type="Italic">Myrica rubra</Emphasis> fruits,leaves and bark

The phenolic composition in dried Myrica rubra fruits, leaves and bark were investigated for evaluation of its contribution to the antioxidant activity. The fruits, leaves and bark have the abundant phenolic compounds with the total phenolic content of 0.673, 0.276 and 0.136 mg/g (GA equivalents/FW), respectively. Ten phenolic compounds were isolated and identified in methanol extracts of Myrica rubra fruits by GC–MS analysis. Less phenolic compounds were found in leaves and bark than in fruits. However, the leaves and bark contain much higher concentrations of the trans-resveratrol over 100 μg/g than in fruits. The total antioxidant activities against the ·DPPH radical of those three samples were 0.438, 0.184 and 0.092 mg/g (Trolox equivalents/FW), respectively. The quantitative results indicated that a good correlation between the total antioxidant activity, total phenolic contents, and abundance of individual phenolic compound in Myrica rubra plants.     

Antiproliferative and antioxidative activities of cuttlefish (<Emphasis Type="Italic">Sepia pharaonis</Emphasis>) protein hydrolysates as affected by degree of hydrolysis

Bioactivities (including antioxidative and antiproliferative properties) of cuttlefish mantle protein hydrolysates (CPH) with the degree of hydrolysis (DH) of 20.9, 25.5, 30.6, 35.3 and 40.6% (shortened as 20, 25, 30, 35 and 40%, respectively) prepared using alcalase were evaluated. The results indicated that the CPH with 20, 30 and 40% DH showed the greatest activity against DPPH radical scavenging [5.2 µmol TE (torolox equivalent)/g sample], reducing power (0.4 absorbance at 700 nm) and total antioxidant capacity (0.6 mg ascorbic acid equivalent/g sample), which were 2.5, 6.5 and 13.8 times higher than the cuttlefish mantle protein isolate (CPI), respectively. The CPH with the DH of 20% had the highest effect against MDA-231 and T47D cancer cell lines with growth inhibition of 78.2 and 66.2%, which were 6.5 and 6 times higher activities compared to the CPI, respectively. The amino acid profile of CPH indicated that glutamine (15.7%) and asparagine (10.9%) were predominant.