浅析硫磺回收装置中的自动控制设计

大规模高含硫原油的炼制工艺必须配套设置脱硫和硫磺回收装置。笔者针对硫磺回收装置的特点,为确保装置的安全平稳运行,提出了该装置自动控制设计中需要严格监控的工艺参数及重点部位,叙述了仪表选型原则和精确测量与控制的原理和方法。     

用MAXScript脚本语言生成分形图形

介绍了分形生成技术的原理与性质、MAXScript脚本语言的特点及功能，详细叙述了用MAXScript脚本语言生成分形图形的设计思想和实现方法。针对分形几何的特点，以具有严格自相似性的分形树为例，通过解释源代码、描述程序运行过程和结果，以及对生成的图片用3DSMAX进行再处理，分析了在3DSMAX环境中用MAXScript脚本语言生成分形图形这一新方法的优点和不足。     

Can Robots Manifest Personality?: An Empirical Test of Personality Recognition,Social Responses,and Social Presence in Human–Robot Interaction

Personality is an essential feature for creating socially interactive robots. Studies on this dimension will facilitate enhanced human–robot interaction (HRI). Using AIBO, a social robotic pet developed by Sony, we examined the issue of personality in HRI. In this gender-balanced 2 (AIBO personality: introvert vs. extrovert) by 2 (participant personality: introvert vs. extrovert) between-subject experiment (N = 48), we found that participants could accurately recognize a robot's personality based on its verbal and nonverbal behaviors. In addition, various complementarity attraction effects were found in HRI. Participants enjoyed interacting with a robot more when the robot's personality was complementary to their own personalities than when the robot's personality was similar to their own personalities. The same complementarity attraction effect was found in participants' evaluation of the robot's intelligence and social attraction. Participants' feelings of social presence during the interaction were a significant mediator for the complementarity attraction effects observed. Practical and theoretical implications of the current study for the design of social robots and the study of HRI were discussed.     

缝洞型碳酸盐岩油藏流动单元概念和研究方法探讨

流动单元对于提高油田采收率具有很大的实际意义,该项研究在砂岩油藏研究中已取得较大进展。对于缝洞型碳酸盐岩油藏,由于岩石结构构造、成岩后生作用、构造断裂作用、溶蚀作用等多因素对储集空间的影响,已有的流动单元概念及研究技术方法难于应用。以塔河油田为例,针对缝洞型碳酸盐岩地质特征,论证了碳酸盐岩储层渗流屏障的存在及其类型,探索性提出区别于砂岩油藏的缝洞型碳酸盐岩储层流动单元的概念。提出的研究思路和方法包括;油藏压力趋势分析法、井间生产干扰分析法、流体性质差异分析法、井间干扰试井法。结合储层发育特征,初步建立了缝洞型碳酸盐岩流动单元的划分标准。     

Master sintering curve concepts as applied to the sintering of molybdenum

Sintering experiments with various molybdenum powders are rationalized using a master sintering curve concept that collapses density, grain size, or other parameters onto a single curve. In this case, the integral work of sintering is developed and customized for different green densities. Construction of the master sintering curve is described to show how the curve can be normalized with respect to green density effects. Various grades of molybdenum for metal injection molding and die compaction are included in the analysis, processed over a range of heating cycles. Die-compacted samples of varying green densities are used to illustrate the efficacy of the new, normalized master sintering curve concept. Sintering cycle optimization is one possible outcome from this analysis.     

覆膜滤料的滤尘性能测试方法研究

由于覆膜滤料的结构和性能有别于普通滤料，因而普通滤料的滤尘性能测试方法不完全适用于覆滤料。本文作者在总结实践经验的基础上，提出了在覆膜滤料的滤尘性能测试中应注意的一些问题和应增加的测试项目。     

控制W9Cr3Mo4V低倍碳化物剥落的工艺改进

针对W9Cr3M04V轧制成品材低倍碳化物剥落的形成原因分析，得出一次碳化物颗粒粗大、在1／4D至中心区域聚集是导致低倍热酸浸试验碳化物剥落的主因；由此进行冶炼过程中注速（锭形）、浇注温度选择对比工艺试验，得出在原有冶炼＋轧制的工艺基础上选用2．2t锭、降低浇注温度（1489℃）能有效改善一次碳化物颗粒大小和聚集程度，进而有效降低低倍碳化物剥落倾向。     

Measurement-based TFRC: improving TFRC in heterogeneous mobile networks

As a well-known multimedia stream transport protocol, TFRC provides smooth transfer rate under stable network conditions, and achieves good fairness to TCP. However, it is not flexible in heterogeneous mobile networks because the available bandwidth varies rapidly. This paper proposes a measurement based TFRC (MBTFRC) protocol, which uses passive bandwidth measurements at the receiver to improve the flexibility of TFRC. In addition, a window-based EWMA filter with two weights is used to achieve stability and fairness simultaneously. Simulation results verify the flexibility, stability and fairness of MBTFRC.     

Restraining the associations of anthracene fluorophore by chemically linking to poly(methyl methacrylate)

Associations (dimer or aggregate) of anthracene (An) fluorophores tend to interrupt the monomer emission and reduce the quantum yield (Φ_PL); therefore, poly(methyl methacrylate) (PMMA) chain was used in this study to chemically link to anthracene and to block the mutual associations among the anthracene fluorophores. With this aim, the target polymers were prepared by anionic polymerizations with 9,10‐dibromoanthracene/s‐butyllithium as initiating system to proceed polymerizations of methyl methacrylate (MMA) directly or in the presence of 1,1‐diphenylethylene (DPE). Use of DPE before addition of MMA produces stable initiating anionic species and avoids potential side reactions during polymerization; however, it also introduces four β‐phenylene rings around the central anthracene ring, which interfere with the corresponding emission pattern and reduce the Φ_PL (32%) value due to potential interactions between phenylene rings and anthracene. On the contrast, polymerization without participation of DPE results in polymer with central anthracene ring directly connected to two PMMA chains, which gives clean vibronic emission pattern with limited association emissions and enhanced Φ_PL (52%) value. Physical blending of anthracene by PMMA is less efficient to restrain the associations and results in a film of lower Φ_PL (20%). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008