The feature-based posterior crown design in a dental CAD/CAM system

This paper presents a newly developed CAD approach for a quick and accurate design of a dental posterior prosthesis. The approach arises from the basic idea that every human tooth has its own specific features. Based upon the features of the standard posterior tooth, the initial data containing the defined feature points are firstly acquired from the scanned points of the standard tooth. The standard prosthetic profile is thereby formulated using the bicubic Nurbs surface fitting technique. This profile has the two functions of possessing the same features with the patient’s missing posterior tooth, and the adjustability with the feature points and the defined B-spline profile feature curves. For the purpose of the adjustment of the established model, the global and occlusal feature curves are proposed considering the individual patient’s original information. According to these curves, the corresponding standard prosthetic profile is locally adjusted to meet the fit of the global size and occlusal surface. Finally, a close and continuous profile of a posterior crown is generated. Using this design, a posterior prosthesis is successfully manufactured in the computer-aided machining process.     

岩溶地区设计洪水计算的探讨

岩溶地区溶洞形状千姿百态，对洪水的影响程度各不相同，如何考虑其影响，在目前的水利水电工程设计规范中没有明确规定。贵州省是世界上典型的岩溶地貌地区之一，根据在贵州省水利水电工程设计的实践，总结摸索出针对不同溶洞状况、集水状况和水文站布设情况的设计洪水计算方法。在可确定岩溶集水面积条件下的方法有调洪演算法、溶洞削减法、叠加合成法和统一处理法；不能确定岩溶集水面积条件下的方法有流量法、地区综合法、统一处理法等。     

Network traffic prediction based on a new time series model

Fast and accurate methods for predicting traffic properties and trend are essential for dynamic network resource management and congestion control. With the aim of performing online and feasible prediction of network traffic, this paper proposes a novel time series model, named adaptive autoregressive (AAR). This model is built upon an adaptive memory‐shortening technique and an adaptive‐order selection method originally developed by this study. Compared to the conventional one‐step ahead prediction using traditional Box–Jenkins time series models (e.g. AR, MA, ARMA, ARIMA and ARFIMA), performance results obtained from actual Internet traffic traces have demonstrated that the proposed AAR model is able to support online prediction of dynamic network traffic with reasonable accuracy and relatively low computation complexity. Copyright © 2005 John Wiley & Sons, Ltd.     

液态混合有机标准物质研究

本研究采用重量法配制有机液态混合标样 ,并对配制方法、混合标样的均匀性、稳定性及影响不确定度的因素进行了研究 ,并用气相色谱法进行了比对分析。经稳定性监测 ,稳定度大于等于一年 ,不确定度小于± 2 %。     

无线局域网技术及应用

无线局域网技术是目前发展迅速的技术，相对于有线局域网有许多优点。随着无线网络产品性能的提高和价格的不断下降，无线局域网技术有着广泛的应用前景。据此对无线局域网的基本概念、特点及其技术作了简单的介绍，提出了无线局域网面向应用的几种解决方案，并对发展前景作了预测。     

La doping effects on intergrowth Bi2WO6–Bi3TiNbO9 ferroelectrics

La doping effects on intergrowth Bi₂WO₆–Bi₃TiNbO₉ ferroelectric ceramics were studied by X-ray diffraction, electron probe microanalysis and dielectric spectroscopy. It was found that the La³⁺ distribution, ferroelectric phase transition and dielectric relaxation behavior are apparently affected by La doping. With increasing La³⁺ content, the site of dopant ion varies, the grain growth of Bi₅TiNbWO₁₅ is restrained, the Curie temperature is reduced and broadened. Furthermore, two dielectric relaxation loss peaks were observed both in temperature and frequency spectra. The calculated relaxation parameters revealed the oxygen vacancy related to the relaxation process.     

The thermal behavior of mechanically activated galena by thermogravimetry analysis

The thermal decompositions of mechanically activated and nonactivated galenas were studied by thermogravimetry analysis (TGA) at the heating rate of 10 K min⁻¹ in argon. Results indicate that the initial temperature of thermal decomposition (abbreviated as T _di) in the TGA curves for different galenas decreases gradually with increased grinding time. The specific granulometric surface area (S _G), the structural disorder, and the content of elemental sulfur of mechanically activated galenas were analyzed by an X-ray diffraction (XRD) laser particle-size analyzer, XRD analysis, and the gravimetric method, respectively, which shows that the specific granulometric surface area of mechanically activated galenas remains almost constant after a certain grinding time, but the lattice distortions (ε) rise, the crystallite sizes (D) decrease, and the elemental sulfur contents of mechanically activated galenas increase with increased grinding time. The results imply that the decrease of the initial temperature of thermal decomposition in the TGA curves for mechanically activated galenas is mainly caused by the increase of lattice distortions, and the formation of new dangling bonds resulted from the production of elemental sulfur of mechanically activated galenas with increased grinding time. Finally, the differences in the thermal-decomposition reactivity between nonactivated and mechanically activated galenas were also discussed.     

拉伸试验测量不确定度的研究

分析了拉伸试验中抗拉强度Rm的影响因素，对测量不确定度的主要分量进行量化，评定了Rm的相对测量不确定度，作为生产检验中评定测量不确定度的尝试，以便为用户提供钢材性能测量结果的不确定度。     

自蔓延高温合成TiNi多孔体合金

为了开发新型的生体材料，本文对自蔓延高温合成TiNi多孔体合金——人造骨材料进行了研究。以单质钛粉和镍粉作原料，在氩气保护条件下，采用预热点燃模式和热爆模式制得了不同形态的多孔TiNi形状记忆合金。采用SEM和XRD分析了样品的孔洞特征和相组成，测试了其力学性能，并研究了合成条件参数与样品表面形貌和孔隙状态之间的关系。结果表明，用SHS法制备TiNi多孔体合金是可行的。     

唐钢ER70S-6焊丝钢的生产工艺研究及质量分析

介绍了唐钢ER70S-6焊丝钢的特点，对盘条质量进行了分析。对该钢化学成分、冶炼和轧制工艺进行了优化研究，使其综合性能明显改善。