Mechanical Properties and Microstructure of a Metakaolin-Based Inorganic Polymer Mortar Reinforced with Quartz Sand

Silicon - The synthesis, mechanical behaviour, and microstructure of metakaolin-based geopolymer mortar reinforced with quartz sand are presented in this investigation. Fine sand (quartz sand)...     

Comparative analysis of the outdoor performance of a dye solar cell mini‐panel for building integrated photovoltaics applications

New generation photovoltaic (PV) devices such as polymer and dye sensitized solar cells (DSC) have now reached a more mature stage of development, and among their various applications, building integrated PVs seems to have the most promising future, especially for DSC devices. This new generation technology has attracted an increasing interest because of its low cost due to the use of cheap printable materials and simple manufacturing techniques, easy production, and relatively high efficiency. As for the more consolidated PV technologies, DSCs need to be tested in real operating conditions and their performance compared with other PV technologies to put into evidence the real potential. This work presents the results of a 3 months outdoor monitoring activity performed on a DSC mini‐panel made by the Dyepower Consortium, positioned on a south oriented vertical plane together with a double junction amorphous silicon (a‐Si) device and a multi‐crystalline silicon (m‐Si) device at the ESTER station of the University of Rome Tor Vergata. Good performance of the DSC mini‐panel has been observed for this particular configuration, where the DSC energy production compares favorably with that of a‐Si and m‐Si especially at high solar angles of incidence confirming the suitability of this technology for the integration into building facades. This assumption is confirmed by the energy produced per nominal watt‐peak for the duration of the measurement campaign by the DSC that is 12% higher than that by a‐Si and only 3% lower than that by m‐Si for these operating conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Pectins from Aloe Vera: Extraction and production of gels for regenerative medicine

Extraction, purification, and gel preparation of Aloe Vera pectin and the evaluation of the biocompatibility of the pectin gels were studied, considering as end use as implantable materials for regenerative medicine. A. Vera was chosen as source of pectin, as this pectin was described to possess high molecular weight and a low degree of esterification. As the properties of pectins are strictly dependent upon the extraction methods in combination with the natural source, the extraction method was modified in order to optimize the yield of the final product, its purity, the duration of the process and the selection of non‐toxic chemical reagents. Changing the experimental conditions resulted in four different extraction processes and products with different physical and chemical characteristics. The optimal extraction resulted to be the process: with enzimatic deactivation by microwave and the use of sodium citrate as chelating agent the molecular weight of the pectin extracted was estimated to be 118 kDa and the 2.93% esterification degree. Cytocompatibility of pectin gels, prepared by ionotropic gelation, showing an improved cell adhesion if compared to commercial pectin. The results suggest that the extracted A. Vera pectins possess interesting properties to be exploited for the production of mechanically stable gels by ionotropic gelation and high rhamnose content matrices for application in regenerative medicine. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39760.     

Isothermal crystallization kinetics of poly(lactic acid)/synthetic mica nanocomposites

The isothermal crystallization kinetics of PLA/fluoromica nanocomposites was studied. Three types of synthetic mica at three concentrations (2.5, 5.0, and 7.5 wt % mica) were used and the effect of these micas on the crystallization and thermal properties of PLA was investigated by differential scanning calorimetry (DSC). The Avrami and Hoffman‐Weeks equations were used to describe the isothermal crystallization kinetics and melting behavior. Addition of these micas to the PLA matrix increased the crystallization rate, and this effect depended on the mica type and concentration. While the nonmodified Somasif ME‐100 exerted the smallest effect, the effect observed for the organically modified Somasif MPE was the most pronounced. The lower half‐time of crystallization t_1/2 was around 3 min for the PLA/Somasif MPE nanocomposites containing 7.5 wt % of filler at 90°C, which is about 16 min below that found for neat PLA. The equilibrium melting temperature ( ) of PLA were estimated for these systems, showing an increase in the composites and an increase with increasing loading, except for PLA/Somasif MPE, in which the increase of the mica content decreased about 5°C. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40322.     

Synthesis,structural and morphological characteristics,magnetic and optical properties of Co doped ZnO nanoparticles

Zn_1−xCo_xO (x==0.05, 0.10, 0.15) nanoparticles have been synthesized by an alternative wet-chemical synthesis route using the SimAdd technique. The as-obtained powders were investigated by FT-IR spectroscopy, X-ray diffraction and thermal analysis correlated with evolved gas analysis (TG–DTA–FT-IR) in order to determine their chemical nature, crystalline structure and to establish the decomposition sequences. The precipitates are generally amorphous, but low-intensity reflection peaks assigned both to the zinc oxalate dihydrate, and zinc hydroxide can be observed in the recorded patterns, indicating that hydroxy-oxalate precipitates were obtained. The structure, morphology and magnetic properties of the thermally treated samples have been investigated by X-ray diffraction, FT-IR, HRTEM, SAED, UV–vis and EPR. XRD studies reveal a hexagonal wurtzite-type structure for all Zn_1−xCo_xO samples. TEM investigations show particle size between 28 and 37 nm, with spherical and polyhedral shapes and with tendency to form aggregates. The presence of a Co₃O₄ secondary phase was evidenced by XRD, UV–vis and EPR for the Zn_0.85Co_0.15O sample. The ferromagnetic behavior of the samples was revealed. The paper highlights that by varying the cobalt concentration it is possible to modulate the structural, morphological, optical and magnetic properties.     

On the preparation of porous crosslinked poly(ethylene dimethacrylate esters): Polymers and copolymers

Macroreticular polymers and copolymers based on poly(ethylene glycol dimethacrylate esters) possessing a permanent porosity (white opaque beads, 40–60% porosity, 354 m²/g, the apparent density less than 1.060 g/mL, etc.) were prepared. The influence of the porogen thermodynamic quality and its weight fraction used in the polymerization mixture on the bead structure was also studied. The porous structure of the matrices was investigated and proved by SEM analyses, the N₂ adsorption (BET) method, etc. The thermal degradation mechanism of the macroreticular beads based on dimethacrylate esters shows that the thermal stability of samples depends on the monomer structure, i.e., the chain length between the two vinyl groups. © 1996 John Wiley & Sons, Inc.     

Post mortemRelease of Fish White Muscle α-Actinin as a Marker of Disorganisation

α-Actinin release and its degradation from myofibrils Z-line were studied in post mortem white dorsal muscle from bass and sea trout stored at 4°C and 10°C. Using α-actinin specific antibodies, we show that this protein is rapidly released within the first 24 h for the two species, and reaches a plateau within 4 days. Proteolysis take place very rapidly in bass muscle yielding 80 and 40 kDa fragments from α-actinin as major bands of proteolysis. Sea trout muscle is more resistant, and muscle stored at 4°C is not significantly α-actinin degraded even 10 days after death. In the case of sea trout muscle stored at 10°C, an increasing quantity of 80 and 40 kDa fragment can be observed after the third day. These results show that release and proteolysis of α-actinin are time- and temperature-dependent processes that take place at the early stages of fish storage. Furthermore, we observed that proteolysis of α-actinin seems to be dependent on fish species. In both species studied, the early release of α-actinin comes before the degradation of released molecules, and appears as a biphasic process throughout the disorganisation of post mortem muscle in fish cold-stored above 0°C.     

Determination of Amylose in Cereal and Non-Cereal Starches by a Colorimetric Assay: Collaborative Study

An improved colorimetric method, based on the well-known reaction between amylose and iodine, is described. Native starch is dissolved in ureadimethylsulfoxide and the resulting solution defatted with ethanol. An aliquot of the lipid-free solution is then reacted with iodine and the absorbance of the blue-coloured amylose-iodine complex measured, thus determining the iodine-binding capacity of starch (Blue Value). A collaborative study was conducted, according to official guidelines, to determine the method's repeatability and reproducibility: 8 participants were each sent 8 starch samples from different botanic origin for duplicate analysis. Statistical evaluation of the results gave good precision results, with an average repeatability relative standard deviation of 2.1% and an average reproducibility relative standard deviation of 5.6%. The method is, therefore, suitable to determine precisely the amylose content of native starch.     

SI-ATRP Decoration of Magnetic Nanoparticles with PHEMA and Post-Polymerization Modification with Folic Acid for Tumor Cells’ Specific Targeting

Targeted nanocarriers could reach new levels of drug delivery, bringing new tools for personalized medicine. It is known that cancer cells overexpress folate receptors on the cell surface compared to healthy cells, which could be used to create new nanocarriers with specific targeting moiety. In addition, magnetic nanoparticles can be guided under the influence of an external magnetic field in different areas of the body, allowing their precise localization. The main purpose of this paper was to decorate the surface of magnetic nanoparticles with poly(2-hydroxyethyl methacrylate) (PHEMA) by surface-initiated atomic transfer radical polymerization (SI-ATRP) followed by covalent bonding of folic acid to side groups of the polymer to create a high specificity magnetic nanocarrier with increased internalization capacity in tumor cells. The biocompatibility of the nanocarriers was demonstrated by testing them on the NHDF cell line and folate-dependent internalization capacity was tested on three tumor cell lines: MCF-7, HeLa and HepG2. It has also been shown that a higher concentration of folic acid covalently bound to the polymer leads to a higher internalization in tumor cells compared to healthy cells. Last but not least, magnetic resonance imaging was used to highlight the magnetic properties of the functionalized nanoparticles obtained.     

From Molecules to Behavior in Long-Term Inorganic Mercury Intoxication: Unraveling Proteomic Features in Cerebellar Neurodegeneration of Rats

Mercury is a severe environmental pollutant with neurotoxic effects, especially when exposed for long periods. Although there are several evidences regarding mercury toxicity, little is known about inorganic mercury (IHg) species and cerebellum, one of the main targets of mercury associated with the neurological symptomatology of mercurial poisoning. Besides that, the global proteomic profile assessment is a valuable tool to screen possible biomarkers and elucidate molecular targets of mercury neurotoxicity; however, the literature is still scarce. Thus, this study aimed to investigate the effects of long-term exposure to IHg in adult rats’ cerebellum and explore the modulation of the cerebellar proteome associated with biochemical and functional outcomes, providing evidence, in a translational perspective, of new mercury toxicity targets and possible biomarkers. Fifty-four adult rats were exposed to 0.375 mg/kg of HgCl₂ or distilled water for 45 days using intragastric gavage. Then, the motor functions were evaluated by rotarod and inclined plane. The cerebellum was collected to quantify mercury levels, to assess the antioxidant activity against peroxyl radicals (ACAPs), the lipid peroxidation (LPO), the proteomic profile, the cell death nature by cytotoxicity and apoptosis, and the Purkinje cells density. The IHg exposure increased mercury levels in the cerebellum, reducing ACAP and increasing LPO. The proteomic approach revealed a total 419 proteins with different statuses of regulation, associated with different biological processes, such as synaptic signaling, energy metabolism and nervous system development, e.g., all these molecular changes are associated with increased cytotoxicity and apoptosis, with a neurodegenerative pattern on Purkinje cells layer and poor motor coordination and balance. In conclusion, all these findings feature a neurodegenerative process triggered by IHg in the cerebellum that culminated into motor functions deficits, which are associated with several molecular features and may be related to the clinical outcomes of people exposed to the toxicant.