Study of 18-cm long single-sided AC-coupled silicon microstripdetectors

The SSC GEM silicon Central Tracker design incorporated 18-cm long single-sided AC-coupled silicon microstrip ladders. Compared to the 12-cm long ladders considered in the preliminary stages of the tracker design, the 18-cm long ladders have the advantage of reduced cost, channel count and overall power consumption, and led to a simplified tracker assembly. However, such long ships also present the challenge of maintaining satisfactory performance. The increased capacitance and series resistance contribute to lower signal-to-noise ratios, longer time walk, higher power consumption per channel and increased probability of crosstalk to neighboring channels. In this paper, an accurate method to calculate the geometric capacitance of the AC-coupled microstrips is presented and the calculated results are compared with measurements, SPICE simulations are performed to predict the noise, the extent of interstrip capacitive coupling and the dispersion of the detector signal due to the finite series resistance of the metal strips and the long length of the detector. The influence of the preamplifier current and the shaping time on the signal and noise levels is also presented. The study concludes that the 18-cm long ladders can successfully satisfy the performance goals of the GEM silicon Central Tracker     

The liberal ophthalmologists of the northern France and management of children with vision deficiencies

PURPOSE: The purpose of this analysis was to appreciate the management of visually handicaped children outside specialized structures. We also assessed relays between primary physicians, hospitals and specialized structures. METHOD: A 12-question survey was sent to 144 liberal ophthalmologists of the North of France. The questionnary included 12 questions. We compared the results to litterature. RESULTS: The response-rate was 59.6%. This study indicated that the observed children by the liberal ophtalmologists had more simple diseases than in specialized structures. In hospitals, it seemed that the ophtalmologists diagnosed more severe diseases. These practitioners diagnosed some of these diseases. However some of diagnosis were to late. This study showed that specialized structures were not enough known by the practitioners who detected this handicap and that the families prefered the taking in charge near their home. CONCLUSION: We demonstrated the necessary organisation of precocious and systematic detection, and the necessary information to all practitioners on specialized structures.     

COPD: using nutrition to prevent respiratory function decline

Close to three-fourths of patients with chronic obstructive pulmonary disease (COPD) suffer from weight loss. Identifying a single cause for this is difficult, as several factors-including chronic mouth breathing, dyspnea, aerophagia, certain medications, and depression-often act in concert. Malnutrition can exacerbate symptoms of COPD by decreasing ventilatory muscle strength, exercise tolerance, and immunocompetence, and by increasing the risk of depression and anxiety. Goals of nutrition intervention are to prevent or reverse malnutrition without worsening the disease process and to improve respiratory function, thereby reducing morbidity and delaying mortality. Recommendations for intake of fats, carbohydrates, protein, and water must be individualized.     

Slag of the production of aluminum alloys from secondary resources as a raw material for the refractory industry

Results of chemical, x-ray phase, and petrographic investigations of slag are presented. It is established that slag from the production of aluminum alloys from secondary raw materials can be classified as a high-alumina refractory material (85–95% Al₂O₃ + SiO₂, refractoriness 1670–1770°C). The refractory properties of the slag can be retained by magnetic separation. There is a practical possibility of using this slag in the production of refractories. Semidry pressing of a charge based on the slag can give a refractory of grade ShA in accordance with GOST 390-83.Translated from Ogneupory, No. 2, pp. 24 – 26, February, 1996.     

Exchange and oxidation of CO on O-predosed Rh---Al2O3 and Rh---CeO2 catalysts

Exchange and oxidation of C¹⁶O were investigated at 450°C on ¹⁸O-predosed Rh and Pt catalysts supported on A1₂O₃, CeO₂ and CeO₂-Al₂O₃. In all cases, a rapid exchange of C¹⁶O with the surface can be observed. CO oxidation leads to C¹⁶O₂, C¹⁶O¹⁸O and C¹⁸O₂. Significant formation of C¹⁶O₂ is due to the relatively high ¹⁶O coverage in reaction resulting from the C¹⁶O exchange and from an exchange between O surface species and ¹⁶O internal atoms. Hydrogen is also formed via a water-gas shift reaction (CO + surface OH) in higher proportion on CeO₂-containing catalysts than on A1₂O₃. Chlorine inhibits all the reactions (exchange, oxidation and WGS) and particularly the internal exchange.     

Multiterminal light-emitting logic device electricallyreprogrammable between OR and NAND functions

A monolithic multiterminal logic device that functions both optically and electrically as an ORNAND gate, is demonstrated for the first time. The device, based on the real-space transfer of hot electrons into a complementary collector layer, has been implemented in an InGaAs/InAlAs/InGaAs heterostructure grown by molecular beam epitaxy. Excellent performance is obtained at room temperature. The collector current and the optical output power both exhibit the OR and the NAND functions of any two of the three input terminals, these functions being interchangeable by the voltage on the third terminal     

Crystal structure of tRNA-guanine transglycosylase: RNA modification by base exchange

tRNA-guanine transglycosylases (TGT) are enzymes involved in the modification of the anticodon of tRNAs specific for Asn, Asp, His and Tyr, leading to the replacement of guanine-34 at the wobble position by the hypermodified base queuine. In prokaryotes TGT catalyzes the exchange of guanine-34 with the queuine (.)precursor 7-aminomethyl-7-deazaguanine (preQ1). The crystal structure of TGT from Zymomonas mobilis was solved by multiple isomorphous replacement and refined to a crystallographic R-factor of 19% at 1.85 angstrom resolution. The structure consists of an irregular (beta/alpha)8-barrel with a tightly attached C-terminal zinc-containing subdomain. The packing of the subdomain against the barrel is mediated by an alpha-helix, located close to the C-terminus, which displaces the eighth helix of the barrel. The structure of TGT in complex with preQ1 suggests a binding mode for tRNA where the phosphate backbone interacts with the zinc subdomain and the U33G34U35 sequence is recognized by the barrel. This model for tRNA binding is consistent with a base exchange mechanism involving a covalent tRNA-enzyme intermediate. This structure is the first example of a (beta/alpha)-barrel protein interacting specifically with a nucleic acid.     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Important lessons derived from X.500 case studies

X.500 is a new and complex electronic directory technology that is still unproven in many organizations. The author presents case studies of 15 pioneering pilot and operational X.500 based directory services, and provides valuable insights into how organizations are coming to understand this new technology and derive benefits from it. The case studies presented cover a reasonably broad spectrum of organizations, including computer suppliers, government organizations, universities, and research institutes, as well as the UK and US defense community. Some of the factors that were critical to the success of the X.500 projects studied are identified