Probabilistic calculation for the bed under an individual foundation in accordance with the second group of limiting states

Conclusions 1. The method proposed for the probabilistic design of beds makes it possible to obtain a well-founded design solution corresponding to a given reliability level, which, in many cases, is more economic than the solution recommended in the Construction Rules and Regulations. 2. The design solution adopted as a result of the calculation set forth in the Construction Rules and Regulations possesses a reliability level, which, for some unknown reason, is on the high side. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 2, pp. 18–20, March–April 1991.     

Elastoplastic finite-element analysis of the bearing capacity of beds of reconstructed entities

A method is presented for determination of the coefficients that take into account the increase in angle of internal friction and specific cohesion of silty-clayey soils in predicting variation in the bearing capacity of beds after the long-term effect of the consolidating service-induced loads. __________ Translated From Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 2, Pp. 18–21, March–April, 2007.     

Microbial activity and distribution during enhanced contaminant dissolution from a NAPL source zone

Laboratory experiments were conducted to assess microbial reductive dechlorination in one-dimensional sand columns containing a 10 cm long source zone of uniformly distributed residual tetrachloroethene (PCE) nonaqueous phase liquid (NAPL), a 10 cm long transition zone directly down-gradient of the source zone containing some nonuniformly distributed NAPL ganglia, and a 40 cm long plume region down-gradient of the transition zone. The activity and distribution of Sulfurospirillum multivorans, a PCE-to-1,2-cis-dichloroethene (cis-DCE) dechlorinating bacterium, was evaluated in columns containing either a mixed-NAPL (0.25 mol/mol PCE in hexadecane) or pure PCE-NAPL. Significant dechlorination of PCE to cis-DCE was observed in the mixed-NAPL column, resulting in 53% PCE-NAPL mass recovery in the effluent with PCE-NAPL dissolution enhanced by up to 13.6-fold (maximum) and 4.6-fold (cumulative) relative to abiotic dissolution. Quantitative real-time PCR targeting pceA, the PCE reductive dehalogenase gene of S. multivorans, revealed that S. multivorans cells were present in the NAPL source zone, and increased in numbers (i.e., grew) throughout the source and transition zones. In contrast, minimal reductive dechlorination and microbial growth were observed in the column containing pure PCE-NAPL, where aqueous-phase PCE concentrations reached saturation. These results demonstrate that microbial growth within NAPL source zones is possible, provided that contaminant concentrations remain below levels toxic to the dechlorinating organisms, and that microbial growth can result in significant bioenhanced NAPL dissolution.     

The characterisation of friction stir welding process effects on stiffened panel buckling performance

The introduction of advanced welding methods as an alternative joining process to riveting in the manufacture of primary aircraft structure has the potential to realise reductions in both manufacturing costs and structural weight. However, welding processes can introduce undesirable residual stresses and distortions in the final fabricated components, as well as localised loss of mechanical properties at the weld joints. The aim of this research is to determine and characterise the key process effects of friction stir welding assembly methods on stiffened panel static strength performance. Utilising experimentally validated finite element modelling methods, it is demonstrated that welding induced residual stresses have a significant influence, and that collapse behaviour is less sensitive to advanced process effects and process effect magnitudes than panel initial buckling behaviour.     

Radionuclide contamination of foods imported into Iraq following the Chernobyl nuclear reactor accident

Since early 1986, a monitoring program for radionuclides in imported foods has been carried out by the Iraqi Atomic Energy Commission. After the Chernobyl nuclear reactor accident in the Soviet Union, the program was expanded; our laboratory was officially designated by the Iraqi Government to measure radionuclide activity concentrations in foodstuff imported from countries known to be severely contaminated by Chernobyl radioactive fallout. Gamma-spectrometric analysis was used. Food items such as powdered milk, lamb meat, poultry, cereals and grains imported into Iraq before the Chernobyl accident did not contain any detectable fission products. However, all lamb meat, 81% of the lentil, 44% of the powdered milk and chick-pea, and 17% of the roast beef samples were contaminated with 137Cs or 134Cs and 137Cs. The highest 137Cs contamination levels found were 82, 147, 420, 6 and 4 Bq kg-1, respectively. Contamination by 134Cs was approximately 50% of the values given above.     

Congratulations to Valerii Viktorovich Mikheev

Anniversaries and Memorable Dates

Congratulations to Valerii Viktorovich Mikheev Candidate of Technical Sciences, honorable builder of the Russian Federation, and recipient of the prize awarded by the Council of Ministers of the USSR     

Comparative study of dark patinas on granitic outcrops and buildings

Formation of dark patinas on rocky surfaces is mainly related to the deposition of gases and particles and to sulphation mechanisms. In the present study, samples of dark patinas taken from granitic outcrops and from granitic buildings were examined in an attempt to understand the mechanisms of their formation. The outcrops are located in non-polluted areas and are characterized by the absence of any extraneous material that provides calcium, such as e.g. mortar. The buildings are located in areas with low levels of pollution. The climate in the study area favours proliferation of microorganisms. Important differences between the patinas sampled from outcrops and from buildings were observed, as the former are of biological origin and the latter of anthropogenic origin. Although the levels of pollution are low in the sampling area, sulphur was present in all of the samples from urban buildings. Sulphur was not present in patinas from outcrops or in patinas from monuments that are assumed to behave as outcrops (dolmens), although the latter are also of anthropogenic origin. Finally, the patinas were found to be formed by elements accumulated on the surface and not from elements contained within the rock itself.     

Review of toxicity test results submitted in support of pesticide tolerance petitions.

A long term-low level exposure (LLE) experiment was conducted on rats to determine the metabolic patterns for realistic environmental dietary levels of cadmium. Male rats fed with 61 ppb of cadmium ad libitum, 50 labelled with ¹⁰⁹Cd radiotracer as cadmium chloride via drinking mineral water and 11 unlabelled via food for 2 years. The diet was characterized in its metal content by neutron activation analysis to obtain the total dietary intake of different elements.The kidney was found to be the tissue with the major concentration of cadmium which accumulated continuously during the experiment.The variation of the accumulation pattern of Cd concentration in the liver and intestine indicated an initial rapid increase of Cd during the first 100 days. After this period an apparent equilibrium was attained in both these tissues until the end of the study.The intracellular distribution of cadmium in kidneys, liver, intestine and pancreas were similar, the cytosol fractions containing about 80% of the cellular cadmium. Dialysis experiments indicated that significant amounts of cadmium were able to be associated with cellular organelles, the mitochondria representing the most important organelle capable of binding cadmium.The cytoplasmatic Cd-profiles obtained at various stages of the experiment showed that the metal was only bound to a low-molecular-weight component, cadmium-binding protein (CdBP), which represents the specific cellular-binding component for cadmium under the long term-low level exposure (LLE) conditions.No significant variations in the concentrations of the elements in different organs were observed in animals supplemented with ¹⁰⁹Cd in respect to ¹⁰⁹Cd untreated controls.     

Shifting balances in U.S. metropolitan and nonmetropolitan area growth

"This paper assesses some of the recent attempts to explain the perceived growth reversal between metropolitan and nonmetropolitan areas in the United States during the 1970s. The paper argues that the reversal in population trends was not a one-time, radical shift in settlement trends, but rather the result of more continuous underlying industrial trends. Indeed, since 1979, population growth has again become faster in metropolitan than nonmetropolitan areas." The paper includes three sections. Regional and area population and industrial earnings growth patterns are first summarized for the 1960s, 1970s, and 1980s. Theories of polarization and polar reversal are then evaluated and found to be inadequate. Finally, a reconstruction of the neoclassical model is proposed.     

Reaction processes effecting the analysis of chloroform by direct aqueous injection gas chromatography

Several important reaction processes which influence the analysis of chloroform by direct aqueous injection (DAI) gas chromatography have been identified through an investigation of the chlorination reactions of humic acid and a series of simple polyhydroxyaromatic and diketone model compounds in dilute solution. The reaction of chlorine with each substrate system was studied over the pH range 2–12. Gas chromatographic analysis by the DAI and organic solvent liquid-liquid extraction (LLE) procedures gave different measurements for the yield of CHCl₃ depending on the pH of the reaction solution and the chemical structure of the substrate. Under acidic and neutral conditions, a variety of trichloromethyl-substituted intermediates were identified at high concentrations in addition to chloroform by GC/MS. Chloral hydrate, trichloroacetic acid, pentachloroacetone and hexachloroacetone undergo hydrolysis and/or decarboxylation to form CHCl₃ at the high injection port temperatures employed in aqueous injection GC analysis. The results obtained in the current study indicate that the decomposition of these and structurally-related species accounts for differences previously observed upon application of the DAI and either the LLE or purge-and-trap techniques for the determination of CHCl₃ in chlorinated natural waters.