Interferon-gamma inhibits 35S incorporation in heparan sulfate synthesized by human skin fibroblasts

Glycosaminoglycans synthesized by human skin fibroblasts were simultaneously radiolabelled with D-[1-(3H)]glucosamine and Na2(35)SO4. Considering 3H incorporation, we found that IFNgamma increased the production of glycosaminoglycan synthesis, including hyaluronic acid, heparan and chondroitin/dermatan sulfate. In contrast, the production of heparan and chondroitin/dermatan sulfate was slightly decreased on the basis of the 35S signal. Furthermore, when heparan sulfate was treated with nitrous acid, the release of free 35S was greater in control than in treated cells, although the 3H patterns of depolymerization with this agent were similar. These data demonstrate that IFNgamma inhibits the incorporation of sulfate from extracellular medium into heparan sulfate.     

Experimental studies of mechanically-induced articular cartilage defects following implantation of allogeneic embryonal chondrocytes in a collagen-fibrin gel in chickens

Full thickness defects (diameter 1,7 mm; depth 2,5 mm) were created mechanically in articular cartilage and subchondral bone of the condyles of tibiotarsal joints of 9-month old chickens. This full-thickness defects were repaired with cultured allogenic embryonic chick epiphyseal chondrocytes from the tibiae and femura of 10-days-old chicken embryos. The cells were embedded in a collagen-fibrinogen-matrix. Controls were similarly operated, but received either no treatment or implants the delivery substance only. Healing of the defects was observed macroscopically, histologically, histochemically and histomorphometrically after 3, 12 and 24 weeks. This graft was successfully transplanted in mechanically induced defects in 80%. The resulting hyaline cartilage was structurally reorganized according to the host pattern and under the influence of environmental conditions. The articular zone preserved it's cartilaginous phenotype, whereas the subchondral regions were transformed into bone. 12 weeks after the operation the defects in the experimental group were completely filled. In all instances in this group, there was an initial extreme increase of mitotic rate and cell number. After 24 weeks normal and subnormal values were founded. The defects in the control groups healed with fibrocartilage. Our results showed, that only the defects in the experimental group were completely filled with reparative hyaline cartilage tissue. In the present study the mixture of cultured allogenic embryonic chondrocytes and a collagen-fibrinogen-matrix was used successfully as a transplant for repairing defects in articular cartilage of chickens. Thus allogenic transplantation of cultured embryonal chondrocytes appears to be one of the most promising methods for the restoration of articular cartilage.     

Damage of polymers studied by micro-Fourier Transform Raman spectroscopy

Summary The potential of the micro-Fourier Transform Raman tool in examining specific localized regions in polymeric materials with some degree of fluorescence when analyzed by conventional Raman spectroscopy is examined. Analysis of characteristic bands of the vibrational spectra obtained in a small area damaged by a visible and NIR laser beam in commercial Polyethylene Terephthalate (PET) shows a different conformer ratio than that observed in a non irradiated zone.     

The effect of bandwidth allocation policies on delay inunidirectional bus networks

We consider the problem of allocating bandwidth fairly to each node in a shared, unidirectional bus network. We focus on the p_i persistent protocol, since these are open loop policies designed to operate well in high speed networks, which have a very large bandwidth-delay product and feedback in the upstream direction is not available in a timely manner. First, we introduce an improvement to the basic p_i persistent protocol, in which we replace random coin tosses with a deterministic counting algorithm, and thereby reduce the delays for all nodes for any given choice of {p_i}. We then describe an exact method for calculating average packet delays and queue lengths in both the p_i persistent and our new deterministic n out of m protocols, based on the regenerative approach of Georgiades et al. (1987). These delay results, together with simulation measurements, show that both of these protocols still waste some bandwidth. After presenting a lower bounding argument to show that some wasted bandwidth is inevitable in all such distributed access control schemes, assuming a passive bus without feedback in the upstream direction, we show that changing the bus to unidirectional point-to-point links between (very simple) active interfaces at each node allows us to construct distributed access schemes that require no upstream feedback and are both work conserving and fair. To illustrate how this can be done, we introduce the p_i preemptive protocol, in which each node randomly inserts its own packets into the traffic arriving from upstream. We derive a simple and effective heuristic for calculating the preemption probability for each node, and use simulation to show how well it equalizes the delays at each node     

Transient and dynamic average-value modeling of synchronous machinefed load-commutated converters

A new average-value model of a synchronous machine fed load-commutated converter is set forth in which the stator dynamics are combined with the DC link dynamics. This model is shown to he extremely accurate in predicting system transients and in predicting frequency-domain characteristics such as the impedance looking into the synchronous machine fed load-commutated converter. The model is verified against a detailed computer simulation and against a hardware test system, thus providing a three-way comparison. The proposed model is shown to be much more accurate than models in which the stator dynamics are neglected     

Structural studies of TiN/ZrN multilayer coating deposited by physical vapour deposition

Multilayer coatings have been produced using unbalanced magnetron physical vapour deposition in which discrete layers of TiN and ZrN were co-deposited. It has been shown that the multilayers exhibited two-fold periodicity having values of 13 and 2.8 nm. This periodicity, measured both by cross-sectional transmission electron microscopy and low-angle X-ray diffraction, has been precisely related to the process parameters used. Analysis has shown that a third, previously unreported, phase existed within the coating having a lattice parameter comparable to that of TiN and a well-defined orientation relationship with the primary phases. The existence of this phase has been explained in terms of variations in the stoichometry of the coating due to non-uniform metal to nitrogen deposition rates within the chamber. Textural studies revealed that preferred orientation existed in the coating; the degree of which was greater in the ZrN layers than the TiN layers.     

Growth of Fe on Si (100) at room temperature and formation of iron silicide

Low-energy electron diffraction (LEED), Auger electron spectroscopy and X-ray photoelectron spectroscopy (XPS) investigations of both the growth of an iron film on silicon (100) at room temperature and the subsequent formation of iron silicide are the subjects of this paper. An in-situ cleaned silicon (100) wafer without carbon or oxygen contamination exhibiting the known 2 × 1 reconstruction in the LEED pattern served as the substrate. Iron was deposited on this reconstructed surface at 300 K. The comparison of theoretical calculations based on three growth mechanisms with XPS data obtained with take-off angles of 0° and 50° clearly demonstrates a layer-by-layer growth of the iron film on silicon (100). At 300 K no formation of iron silicide was observed, although an interaction between iron and silicon could be detected at the interface. The formation of iron silicide was observed at annealing temperatures of 630–730 K. Quantitative XPS analysis yields the presence of FeSi₂, when the thickness is large enough. Neither the iron film on silicon nor the silicide shows any LEED pattern.     

On the J-integral in periodically layered composites

When a heterogeneous elastic material is represented by an effective homogeneous elastic solid, average stress and strain fields are used. The meaning of the J-integral in the effective homogeneous solid is investigated. A periodically layered medium is considered. The relation between the J-integrals in the original layered medium and the effective medium is derived.     

New substrates of papain, based on the conserved sequence of natural inhibitors of the cystatin family

A discontinuous borate/formate buffer system is presented for horizontal polyacrylamide gel electrophoresis of DNA fragments. The resolution potential of the system could be altered by changing the total monomer concentration (5-9%T), the concentration of the crosslinker piperazine diacrylamide (2-5%CPDA), as well as the concentration of formate in the gel (40-120 mM), the leading ion of the buffer system. The separation of DNA fragments would be improved by increasing the migration distance from 22 to 28 cm. This discontinuous polyacrylamide gel electrophoresis system proved highly reproducible.