Laser welding of Al55-Zn coated steel sheet

A study has been made of the procedures used for the lap and butt welding of 0.62 and 1.16 mm thickness steel sheets coated with Al55-Zn alloy, using laser-beam technology. The main problems arise in lap welding as a result of zinc evaporation from the coating. The vapour pressures of this element lead to cratering and blistering of the welds which are visible from the external surface and imply severe weld defects. An efficient solution to this problem consists in leaving a gap between the internal faces, thus allowing the zinc vapours to escape. Excessive gaps, however, lead to the molten metal collapse and to lack of penetration. In the present work, acceptable results were obtained with a maximum interface separation of 0.1 mm. This allows excellent continuity of the joints, without cracks, pores or non-metallic inclusions and with moderate hardnesses, thus demonstrating the good laser weldability of the coated material. A difficulty arises, however, in relation to the coating in zones close to the weld. In these high-temperature zones the coating is lost, and in the immediately adjacent areas the coating microstructure and phases are altered, as was shown by scanning electron microscope analyses.     

对我国催化重整工艺专利市场的思考

根据我国专利法的原则，在对我国催化重整和芳烃生产专利检索过程和结果进行分析的基础上，阐述了对目前我国催化重整工艺专利市场的几点看法并提出对策。     

基于行为经济的预期回报与创业决策关联分析

预期回报对决策具有决定性的影响。基于行为经济模型,认为创业决策依赖于预期回报和欲望水平之间的相互作用,并通过计量分析验证了预期回报对创业决策的影响。     

Requirement of cysteine-rich repeats of the Fas receptor for binding by the Fas ligand

The Fas receptor is a member of a family of cell death receptors, including tumor necrosis factor receptor I (TNFR I), death receptor 3 and 4 (DR3 and DR4), and cytopathic avian receptor 1 (CAR1). The Fas receptor is composed of several discrete domains, including three cysteine-rich domains (CRDs), a transmembrane domain, and an intracellular domain responsible for transmitting an apoptotic signal. While the mechanism of Fas-mediated cell death has become elucidated, the requirements for Fas ligand binding to the receptor have not been fully defined. Using a series of chimeric Fc-receptor fusion proteins between the human Fas receptor and TNFR I, each cysteine-rich domain of Fas was found to be required for interaction with the Fas ligand. Interestingly, TNFR I CRD1 could partially substitute for the Fas CRD1. The importance of this domain was underscored by the analysis of a Fas extracellular mutation (C66R), which resulted in a complete loss of ligand binding. This mutation was cloned from a human patient suffering from Canale-Smith syndrome, which is characterized by autoimmunity resembling that observed in the lpr and lprcg mice. The localization of essential ligand binding domains in the Fas receptor correlated exactly with the ability of the Fas receptor fusion proteins to prevent cell death mediated by the Fas ligand.     

An extraction method to determine interconnect parasitic parameters

Interconnect parasitic parameters in integrated circuits have significant impact on circuit speed. An accurate monitoring of these parameters can help to improve interconnect performance during process development, provide information for circuit design, or give useful reference for circuit failure analysis. Existing extraction methods either are destructive (such as SEM measurement) or can determine only partial parasitic parameters (such as large capacitor measurement). In this paper, we present a new method for extracting interconnect parasitic parameters, which can simultaneously determine the interlayer and intralayer capacitances, line resistance, and effective line width. The method is based on two test patterns of the same structure with different dimensions. The structure consumes less wafer area than existing methods. The method shows good agreement with SEM measurement of dielectric thickness in both nonglobal planarized and chemical-mechanical polished processes, and gives accurate prediction of the process spread of a ring oscillator speed over a wafer     

CTS-26型超声探伤仪典型故障的分析与排除

在简要介绍CTS-26型超声探伤仪工作原理及组成的基础上。对其几种典型故障作了具体的分析和处理。     

气囊内模制作桥面板在华丰湾防洪工程中的应用

采用气囊作内模进行浇筑桥面板混凝土 ,加快了预制桥面板施工进度 ,确保工程施工质量 ,并降低了工程施工成本     

铝带材冷轧机机前展平辊重叠量的探讨

目前国内大多数铝加工厂对铝带材冷轧机机前展平辊的作用缺乏足够的认识，甚至弃而不用。本文主要论述展平辊的作用及展平辊重叠量的计算方法。     

军械调运方案优化算法的设计与仿真

军械调运问题的数学模型和手工算法过去已有研究,但是当问题较为复杂时,手工算法就要花费大量时间而且准确性也难以保证。针对这一缺陷,本文在已有的数学模型和手工算法的基础上,设计了一种可以用计算机实现的基于递归的算法来寻求军械紧急调运问题的最优方案,并使用面向对象的java语言将算法实现。