注硼中子寿命测井注硼工艺优化设计

注硼中子寿命测井是一项水淹层测井新技术 ,对老油田的产层分析评价、剩余油含量估算等方面发挥了重要的作用。但测井施工时 ,往往由于注硼工艺不当导致硼酸的渗吸量难以准确反映地层可动水的含量 ,从而产生解释上的困难和误区。在渗流与扩散理论相结合的基础上 ,结合华北油田的施工实践 ,介绍了确定注硼管柱、硼酸用量、注硼压力以及硼酸扩散时间的基本原则和实际经验 ,为工艺的优化设计提供了一些方法与思路     

微重力落塔电磁悬吊、释放技术研究

论述了微重力落塔电磁悬吊、释放、提升机构的关键技术,电磁释放过程的特性分析以及微重力落塔实际试验的情况。分析说明:悬吊、释放性能的好坏决定了试验落舱的微重力水平,也是微重力落塔试验能否成功的关键技术。     

罐装食品用电镀锡板的耐蚀性及其试验方法

综述了影响罐装食品用电镀锡板耐蚀性能的因素及其试验方法。     

钢纤维混凝土轴拉应力-应变特性的试验研究

本文采用环氧粘接法对4种纤维混凝土材料进行了轴向拉伸试验，成功地获得了材料的应力-应变全曲线。根据其试验曲线是否出现第二峰值，把纤维分为增强与增韧两大类。通过分析表明：不同的纤维形式对混凝土材料的作用机理有较大的差异。在工程应用中，应根据纤维混凝土材料的用途来选择纤维类型。     

北京谱仪端盖簇射计数器工作气体的研究

为使北京谱仪端盖族射计数器更好地工作在自猝灭流光ＳＱＳ模式下，提高其能量分辨以及线性等指标，用Ａｒ，ＣＯ２，Ｌｓｏｂｕｔａｎｅ三元工作气体对探测器的工作性能进行了仔细研究，找出了一适合于主雇地数器的工作气体，此外，还研究了异丁的纯度对探测器性能的影响。     

Dissolution of phase-separated domains after a jump to a temperature in the single-phase region

Phase-separated domains prepared in the two-phase region were dissolved at a temperature in the single-phase region, and their dissolution dynamics was studied by using the time-resolved light scattering (TRLS) technique and a scanning electron microscope (SEM). The time t_ps of preparation of domains was chosen to be long enough for phase separation to proceed into the late stage. The scattered light intensity at small wavenumbers increased before it attenuated. As t_ps increased, the increase at smaller wavenumbers became more significant and the peak intensity decreased only slightly with dissolution time. The characteristic wavenumber q_m evaluated from TRLS and SEM followed the power-law relation q_mt^−0.3.     

Non-destructive evaluation of residual stresses in thin films via x-ray diffraction topography methods

Quantitative x-ray diffraction topography techniques have been used to measure the residual strain magnitude and uniformity of deposition for Mo and W sputtered films on Si(100) substrates. High sensitivity rocking curve measurements were able to determine differential strains for films as thin as 2.5 nm; while Bragg angle contour mapping had similar sensitivity and was also able to assess coating uniformity and stress distribution over areas covering a whole wafer. Measurements of strain versus film thickness over a range of 2.5 nm to 80 nm showed that a critical thickness exists for maximum residual strain. Growth beyond this range produces stress relaxation. This non-destructive type of analysis could be employed on a wide range of film-substrate combinations.     

宁远变电站345开关瓷瓶断裂事故分析

通过检查事故现场发现35 kV宁远变电站#345开关在运行中瓷瓶突然断裂的事故原因为操作机构材料缺陷导致定件轴折断,为此制定了相应的管理措施。     

基于FX2N的三相交流异步电动机综合保护设计

利用负序电流法和零序电流法监测三相异步电动机的运行状态,并设计电动机保护电路和PLC的控制梯形图,提出用FX系列PLC进行故障类型判别和报警处理,设计方案原理简单、工作可靠。     

辐射制备缓释抗癌药阿糖胞苷的研究

报告了甲基丙烯酸酯类在室温下进行辐射聚合制备缓释抗癌药阿糖胞苷（Ａｒａ－Ｃ）的研究结果。结果表明，不仅亲水性单体，而且疏水性单体（包括ＭＭＡ、ＥＭＡ和ＢＭＡ等）都可用于辐射固化。加入到亲水性基质中的疏水性单体可以延缓药物的离体释放，其顺序是ＭＭＡ＜ＥＭＡ＜ＢＭＡ，央ＭＭＡ－ＨＥＭＡ共聚物中，Ａｒａ－Ｃ释放率随着基质中的ＭＭＡ含量增加而降低。药物的离体释放还受许多困素的控制，结果显示：药物释放量随着