NUMERICAL INVESTIGATION ON MUD BED-GENERATION AND IMPACTING A WALL ALONG A SLOPE

In this paper mud was treated as the Bingham fluid. In staggered grids, two-dimensional incompressible Navier-Stokes equations for non-Newtonian fluid was solved by the MAC method. Numerical simulations were conducted on mud bed-generating phenomenon and mud impacting a wall along a slope. The distributions of free surface, pressure and velocity of mud and water were obtained. The results indicate that the computed layer thickness of mud bed almost equals the theoretically predicted value. Because of the differences in constitutive relationship, the distributions of free surface are different for water and mud. The distortion of water free surface is much more complicated.     

Deformation evolution during initiation of transgranular stress corrosion cracking

Face centered cubic metals and alloys have multiple slip systems and are characterized by high dislocation velocities. Nevertheless, these materials suffer from transgranular stress corrosion cracking (T-SCC), that occurs by environmentally-induced cleavage. Since plasticity precedes fracture in all T-SCC phenomena, the evolution of deformation patterning during T-SCC is an important element of the local microfracture mode. Experimental observations show that the presence of the SCC-causing environment during straining is promoting localized plastic deformation at the near-surface region and producing an entirely different deformation pattern compared with that developing in laboratory air. The deformation evolving in the presence of the SCC electrolyte is highly localized, exhibiting closely spaced, coarse slip bands. The amount of localized strain developing at the near-surface region prior to nucleation of stress corrosion cracks is equivalent to the strain required for ductile fracture of the material in air, suggesting the existence of a fundamental fracture criterion. The above phenomenology of the deformation evolution is considered in relation to T-SCC initiation and propagation. The T-SCC is suggested to be a macroscopically brittle but microscopically ductile fracture occurring by localized plastic flow. An environment-induced deformation localization mechanism is described where the role of the environment involves generation of vacancies and subsequent dislocation nucleation from the near-surface region at loads well below those required for normal yielding. The evolution of the localized deformation pattern during T-SCC is suggested to be an outcome of nonuniformity and periodicity in the dissolution process.Presented at Fourth Greek National Congress on Mechanics, 26–29 June 1995, held at Xanthi, Greece.     

a-Si/poly-Si叠层太阳能电池的空间电荷效应和稳定性分析

基于pin结构的a-Si∶H太阳能电池中的空间电荷效应,讨论了a-Si/poly-Si叠层太阳能电池的稳定性.结果表明,在光照射下,光生空穴俘获造成了a-Si∶H中正空间电荷密度的增加,从而改变了电池内部的电场分布,提高了a-Si∶H薄膜中的电场强度.空间电荷效应不会给a-Si/poly-Si叠层结构中的a-Si∶H薄膜带来准中性区(低场"死层"),也没有发生a-Si/poly-Si叠层太阳能电池的光诱导性能衰退,因而a-Si/poly-Si叠层结构太阳能电池具有较高的稳定性.     

湿硫化氢环境下的球罐腐蚀状况分析

在湿硫化氢环境下 ,尤其储存介质中的硫化氢含量超标时 ,很容易对储存容器壳体 (含焊缝和母材 )造成硫化氢应力腐蚀或氢鼓包。作者较仔细分析了 1 0 0 0m3 丙烯球罐产生硫化氢应力腐蚀开裂和40 0m3 LPG球罐产生氢鼓包的原因。提出了此类设备在设计选材、设备制造、施工安装和使用维护等环节应注意的问题。     

一种用于SOC设计中的智能I/O处理器的实现

文章介绍了SOC设计流程，智能I／O处理器组成，在开发该处理器对VHDL源代码的优化问题。     

水溶性丙烯酸涂料的环氧树脂改性

本实验论述了水溶性丙烯酸钢铁底漆涂料制备、性能以及用环氧树脂对其进行改性。原水溶性丙烯酸钢铁底漆涂料在进行耐盐雾测定试验时仅为 72h ,未通过国家规定标准。本实验的目的在于 ,以丙烯酸树脂为主要成膜物质 ,加入其他的辅助成膜物质 ,如环氧树脂来改善其抗盐雾、抗腐蚀、耐候等性能。结果表明 ,一定温度下在水溶性丙烯酸钢铁底漆涂料中加入 1/ 7的环氧树脂后 ,经测定其耐盐雾性可达 10 6h ,达到了国家的规定标准     

钻井液用BDY-1便携式堵漏仪

在堵漏过程中，对堵漏材料和堵漏浆配方的优选是决定堵漏成功的关键。为了能在现场对堵漏进行评价，研制出BDY－1便携式堵漏仪，该堵漏仪主要由不锈钢钢柱圈钢，压力表等加工而成，该堵漏仪体积小，重量轻，价格低，仅为国产堵漏仪的1／20。试验结果表明BDY－1便携式堵漏仪操作简便，可快速对堵漏材料进行评价并筛选出堵漏配方；数据重复性好，准确可靠，能达到进口或国产堵漏仪的水平；在模拟漏层选定后，可采用多套压力梯度，对堵漏浆封堵效果进行评价，在压力梯度选定后，可评价堵漏浆对不同类型漏层的封堵效果；如果扩大压力范围，可对封堵后的漏层进行破裂试验，从而确定合理的钻井施工参数；适用现场操作和应用。     

CMS/TiO2杂化材料电流变液的制备及其性能

利用特殊的溶胶凝胶方法原位制备了改性淀粉与无机钛氧化物杂化型电流变材料。实验表明,在强电场下其电流变效应比相同组份的淀粉、二氧化钛混合型电流变液有显著提高,直流电场4 kV/mm,剪切速率5 s-1时,静态剪切屈服强度可达4000 Pa以上。同时,抗沉降性明显改善,静置100 h几乎不沉淀。此外,温度效应也获得一定的优化,在10 ℃~90 ℃的工作温度范围内力学性能保持良好,70 ℃时剪切强度达到最大值。     

���������ز��׹��ƻ�������Ԫ����

文中建立了套管、水泥环和地层互作用的弹塑性的有限元力学模型，用MSC.Marc软件的高度非线性功能对本文的复杂力学系统进行了一系列的计算机仿真模拟研究，为复杂地层套管破坏机理研究提供了简便，可行的方法。本方法可以反推地层载荷，为复杂地层套管破坏的预防措施提供了理论依据。     

RBF网络及其在卫星姿态控制中的应用

提出了一种基于RBF网络扰动力矩补偿的控制技术，通过在传统PID控制的基础上，引入RBF网络补偿环节，进一步抑制了扰动力矩的影响，提高了卫星姿态控制精度，首先给出了RBF网络的学习算法，然后根据全补偿原则设计了神经网络补偿姿态控制方案，最后结合某型卫星的姿态控制系统设计实例，进行了数学仿真，结果表明：有RBF网络补偿的系统，姿态的稳态精度得到了明显的改善。