浙江省能源效率的测度及影响因子分析

该文以浙江省11个地级市为研究对象,利用数据包络方法测度了其在1995-2008年间的能源效率值,并结合各产业能源消耗量对能源效率变化的影响做出经济解释;随后运用灰色关联分析方法对省内能源效率的影响因子进行排序,结果表明产业结构和市场化水平是主要影响因子;最后提出相关政策建议。     

部分信息下的最优投资选择模型研究

在部分信息下研究了均值方差投资选择模型.投资者只能观察到风险资产的价格,漂移过程用一个高斯过程来刻画.本文的目的是使最终财富期望最大化,而使得最终财富的方差最小.本文模型中有一个债券及股票资产,在部分信息下推导出了最优策略及均值方差有效前沿.     

Preparation,characterization and salt-resistance of a coal based super absorbent composite

Potassium humate was extracted from brown coal.A novel super absorbent composite,poly (acrylic acid-co-acrylamide)/potassium humate (PAA-AM/KHA),was prepared by graft polymerization of acrylic acid,acrylamide and coal based potassium humate using N,N'-methylenebisacrylamide as a crosslinker and potassium peroxydisulfate as an initiator.The effects of reaction temperature,degree of neutralization of the poly (acrylic acid) and the amounts of crosslinker,initiator and potassium humate were investigated.Salt resistance tests were also carried out.The composite prepared under optimal conditions had a potassium humate content of 10% and exhibited a water absorption of 770 g/g in distilled water,and 349,286 and 41 g/g in 0.5 mol/L KC1,MgCl2 and AlCl3 solutions respectively.The results indicate that the salt resistance of PAA-AM/KHA was superior to that of poly (acrylic acid-co-acrylamide) because of the collaborative effect of functional groups of the coal based potassium humate.The PAA-AM/KHA micro powder was characterized by IR spectroscopy and the micrographic surface was characterized by scanning electron microscopy.Introduction of potassium humate into the poly (acrylic acid-co-acrylamide) structure creates a composite more suitable for use as a water-managing material in the renewal of arid and desert environments.The salt resisting property of the composite is improved,production costs are reduced and the growth stimulant effect is still present.     

汽车磁流变减振器多项式模型的研究

将优化后的磁流变减振器放在MTS849减振器试验台上进行试验,在不同的减振器活塞运动速度下,改变通电电流,测试磁流变减振器的示功图和速度特性。利用试验数据,进行多项式拟合,精确的建立了该减振器的阻尼力模型,便于对其半主动悬架实施实时控制。     

Robust parametric approach for tracking control of an air-breathing hypersonic cruise vehicle

To realize the stabilization and the tracking of flight control for an air-breathing hypersonic cruise vehicle, the linearization of the longitudinal model under trimmed cruise condition is processed firstly. Furthermore, the flight control problem is formulated as a robust model tracking control problem. And then, based on the robust parametric approach, eigenstructure assignment and reference model tracking theory, a parametric optimization method for robust controller design is presented. The simulation results show the effectiveness of the proposed approach.     

Numerical simulation on bolted rock joint shearing performance

A Double Shear Model(DSM)was used in a numerical simulation on bolted rock joint shearing performance.An entire bolt deformed as the letter"U"under a shear load between two joints.Near the bolt-joint intersection,the bolt partly deformed as the letter"Z".There were two critical points along the bolt: one was at the bolt-joint intersection with zero bending moment and the other at the maximum bending moment(plastic hinge)with zero shear stress.The blocks on two sides slid along the bolt as it deformed.A separation area was found between the two joint contact surfaces of the middle rock block and sided block.This area of separation was related to bolt diameter and external forces.We assume that this area is related to the work of external forces.Further research is needed.     

电弧喷涂马氏体不锈钢涂层耐磨性

为了系统地研究电弧喷涂马氏体不锈钢涂层的耐磨粒磨损性能,选用几种不同含碳量的马氏体不锈钢作为喷涂材料,制备了不同喷涂工艺参数的试件;采用喷砂吹蚀和湿砂橡胶轮磨损试验研究了涂层试件的耐磨粒磨损性能.试验结果表明,随着喷涂材料w（C）的增加,获得的涂层硬度增加,涂层耐磨粒磨损性能也随之增强.涂层制备的工艺参数对涂层的耐磨性影响很大,增加喷涂电流,涂层耐磨粒磨损性能提高;增加喷涂电压或加大喷涂距离,涂层耐磨粒磨损性能下降.     

胶印机色墨转换实验及数据库开发

在胶印机色彩检测与控制系统中,色墨转换实验数据对色墨转换算法的研究及色彩控制的准确度具有重要的作用.开放式色墨转换工艺数据库便于用户根据自己的需要添加新的色墨转换数据,提高色彩检测与控制系统的通用性及控制精度.在确定色墨转换实验方案的基础上,在北人集团的对开四色胶印机上进行了色墨转换实验;综合考虑影响色墨转换实验的各因素,设计了色墨转换工艺数据库;并采用Visual C++及MySQL开发了开放式色墨转换工艺数据库管理系统,用户可以方便地进行数据的查询、添加、删除及修改等操作.     

四叔丁基萘酞菁氧钒非线性及光限幅特性

为提高酞菁化合物的非线性光学性能,以1,8-二氮杂双环[5.4.0]十一碳烯-7(DBU)为催化剂,采用液相法合成了四叔丁基萘酞菁氧钒((t-Bu)4NcVO)化合物.利用元素分析、红外光谱、核磁共振氢谱方法,验证了化合物的分子结构.应用调Q倍频ns/ps Nd∶YAG脉冲激光系统,在波长为532nm下,研究了化合物的非线性和光限幅特性.测得化合物的非线性折射率n2和三阶非线性极化率χ(3)分别为2.51×10-11esu和8.54×10-12esu,通过计算得到分子极化率γ’为3.7×10-29esu.在透过率69%时限幅阈值为1608mJ/cm2,箝位值为585mJ/cm2,有效激发态与基态吸收截面比为3.66.     

Simulation and optimization of SOFC-BCHP system

As the prime motor of dispersed energy system, the high-temperature solid oxide fuel cells (SOFC) are high efficient with large heat recovery. This study presents a simulation of SOFC building-based cooling, heat and power (BCHP) system, which can meet basic requirements in power and heating (cooling) of the designated customers. The peak power load can be met by power grid, while the peak heating (cooling) load requirement can be met by backup equipments. In order to solve the economic dispatch problem of the energy system, a restricted nonlinear optimization model has been developed. The production costs can be minimized via both the equality constraints of customer’s heat and power demands, and other inequality constrains of equipments’ capacities. The sequential quadratic programming method has been used to search the solution. The study indicates that the model can be used to optimize the system’s capacities and run strategy. An office building case has been computed, and it is indicated that the model can be served in design and optimization of SOFC-BCHP system.