Comparison of technetium-99m-ECD to Xenon-133 SPECT in normal controls and in patients with mild to moderate regional cerebral blood flow abnormalities

Technetium-99m-1,1-ethyl cysteinate dimer (ECD) has been proposed as a "chemical microsphere" for SPECT measurement of regional cerebral blood flow (rCBF). However, its distribution has not yet been compared in humans to an established rCBF measure. Therefore, we compared the uptake and distribution of ECD with rCBF measured by 133Xe SPECT in subjects with mild to moderate flow abnormalities and in normal volunteers. Blood and urine chemistries and vital signs were unchanged from pre-ECD values up to seven days postinjection. Profile plots demonstrated pattern agreement between rCBF ratios (133Xe) and ECD count density ratios. A significant correlation of rCBF ratios to ECD count density ratios was observed (r = 0.77), with a slope of 0.64 and intercept of 0.36. To explore whether or not the relationship between rCBF and ECD was dependent on absolute flow, ECD region of interest data were expressed in units of ml/min/100 g by equating global CBF (133Xe) and ECD global count density. A closer correlation (r = 0.88) was found for these data than for the count ratio data. The slope was closer to one (m = 0.83) and the intercept was closer to zero (b = 8.2). Also, a significant correlation was observed between ECD-derived rCBF and 133Xe rCBF in the lesion area (r = 0.92) for patients with well-demarcated rCBF lesions. The slope (0.80) suggested a slight underestimation of lesion flow by ECD. Finally, ECD clearance from cortical gray matter ROIs derived from high-resolution scans from 1 to 4 hr postinjection was slow (2.4%/hr). In summary, ECD is a safe and effective marker of regional cerebral perfusion. The distribution of ECD is linearly related to rCBF measured by 133Xe SPECT, although our data suggest a mild underestimation of flow at the high end of the normal range.     

Thermal properties of highly birefringent optical fibers and preforms

Temperature cycling of highly birefringent optical fibers and preforms has been used to investigate the thermal properties of bow-tie and elliptically clad structures. The thermal hysteresis of the birefringence is shown to be a direct consequence of the thermal history of the fiber or preform and has been related to volume changes in the stress-producing borosilicate sections. Annealing increases the axial stress as well as the stress anisotropy and hence the birefringence. Increases of up to a factor of 2 in the birefringence on suitable thermal treatment indicate a new method for further improvement of high birefringence fibers. The implications of the results in the design, fabrication, and use of such fibers are discussed.     

Modeling and simulation of hard-particle interaction in head/disk interfaces

A hard particle interacting with a slider and a disk in the head/disk interface of hard-disk drives can produce a scratch on the disk and result in data loss. Our work emphasizes modeling and simulation of slider, particle, and disk interactions, scratch generating mechanisms, and linking of scratch to interface design parameters. Two models are presented. The Monte Carlo method was used to calculate scratch probabilities and parametric studies were performed to determine the effect on scratch probability of various parameters, such as friction coefficients, particle mean size, slider wall angles, the ion-milling (IM) etch depth from the air-bearing surface (ABS) of the slider, and the efficacy of additional ABS structures acting as particle shields. Simulation results show that the friction coefficient is a dominant parameter. If the disk friction coefficient is smaller than the slider friction coefficient, scratches are not produced. Using shallow IM depths is an effective and practical way to reduce the scratch probability. Experimental results are very close to the simulation predictions.     

Servers in SCADA applications

Data acquisition and supervisory control and data acquisition (SCADA) systems have evolved from mainframe-based systems to multilevel tiered systems to flat client-server architecture. This paper examines the necessity for this evolution and the technology that spurred it on. A rod mill is discussed as a case study     

On the Computational Complexity of Consumer Decision Rules

A consumer entering a new bookstore can face more than 250,000alternatives. The efficiency of compensatory and noncompensatory decisionrulesfor finding a preferred item depends on the efficiency of their associatedinformation operators. At best, item-by-item information operators lead tolinear computational complexity; set information operators, on the other hand,can lead to constant complexity. We perform an experiment demonstrating thatsubjects are approximately rational in selecting between sublinear and linearrules. Many markets are organized by attributes that enable consumers toemploya set-selection-by-aspect rule using set information operations. In cyberspacedecision rules are encoded as decision aids.     

Observability problem for bearings-only tracking

The state-observability problem for bearings-only tracking of a constant velocity target by a moving observer in two spatial dimensions is analysed. Specifically, we establish general necessary and sufficient conditions for observability and characterize the class of observer motions for which the state remains unobservable. In the course of the analysis, previously developed observability criteria are identified as special cases of our results.     

Enzymatic Writing to Soft Films: Potential to Filter,Store, and Analyze Biologically Relevant Chemical Information

Sensor‐based chemical analyses commonly enlist either the molecular recognition capabilities of biology (e.g., enzyme biosensors) or advanced information processing algorithms (e.g., the electronic nose). Here, a hybrid approach is proposed in which an enzyme is used to “filter” chemical information and write this information to a film which then serves as a permanent storage medium that can be ‘read’ repeatedly, interactively, and by multiple sensor modalities. This approach is demonstrated by analyzing common dietary phenols that are reported to offer health benefits. Specifically, the enzyme tyrosinase is used to convert these phenols into reactive quinones that graft (i.e., write) to a chitosan film. Grafting can be detected by optical, mechanical, and electrochemical sensors. Importantly, grafting confers redox activity to the films and this redox activity can be probed interactively by advanced electrochemical methods that allow the intrinsic redox reactivities to be compared, redox interactions to be identified, and biologically relevant redox activities to be examined. The transfer of chemical and biological information to a film is envisioned to provide broader access to the extensive capabilities offered by sensor technologies and signal processing methodologies.     

Complex and dynamic population structures: synthesis, open questions, and future directions

The population structure of an evolutionary algorithm influences the dissemination and mixing of advantageous alleles, and therefore affects search performance. Much recent attention has focused on the analysis of complex population structures, characterized by heterogeneous connectivity distributions, non-trivial clustering properties, and degree–degree correlations. Here, we synthesize the results of these recent studies, discuss their limitations, and highlight several open questions regarding (1) unsolved theoretical issues and (2) the practical utility of complex population structures for evolutionary search. In addition, we will discuss an alternative complex population structure that is known to significantly influence dynamical processes, but has yet to be explored for evolutionary optimization. We then shift our attention toward dynamic population structures, which have received markedly less attention than their static counterparts. We will discuss the strengths and limitations of extant techniques and present open theoretical and experimental questions and directions for future research. In particular, we will focus on the prospects of “active linking,” wherein edges are dynamically rewired according to the genotypic or phenotypic properties of individuals, or according to the success of prior inter-individual interactions.     

Modular and Versatile Spatial Functionalization of Tissue Engineering Scaffolds through Fiber‐Initiated Controlled Radical Polymerization

Native tissues are typically heterogeneous and hierarchically organized, and generating scaffolds that can mimic these properties is critical for tissue engineering applications. By uniquely combining controlled radical polymerization (CRP), end‐functionalization of polymers, and advanced electrospinning techniques, a modular and versatile approach is introduced to generate scaffolds with spatially organized functionality. Poly‐ε‐caprolactone is end functionalized with either a polymerization‐initiating group or a cell‐binding peptide motif cyclic Arg‐Gly‐Asp‐Ser (cRGDS), and are each sequentially electrospun to produce zonally discrete bilayers within a continuous fiber scaffold. The polymerization‐initiating group is then used to graft an antifouling polymer bottlebrush based on poly(ethylene glycol) from the fiber surface using CRP exclusively within one bilayer of the scaffold. The ability to include additional multifunctionality during CRP is showcased by integrating a biotinylated monomer unit into the polymerization step allowing postmodification of the scaffold with streptavidin‐coupled moieties. These combined processing techniques result in an effective bilayered and dual‐functionality scaffold with a cell‐adhesive surface and an opposing antifouling non‐cell‐adhesive surface in zonally specific regions across the thickness of the scaffold, demonstrated through fluorescent labelling and cell adhesion studies. This modular and versatile approach combines strategies to produce scaffolds with tailorable properties for many applications in tissue engineering and regenerative medicine.     

Diporphyrin tweezer for multichannel spectroscopic analysis of enantiomeric excess

Chiral 1,1’-binaphthyl-linked diporphyrin ‘tweezers’ (R)-1/(S)-1 and the corresponding zinc(II) complexes (R)-2/(S)-2 were prepared as chiral host molecules, and their utility for chiral analyses (especially enantiomeric excess (ee) determinations) were evaluated. Tris(1-n-dodecyl)porphyrins were used for the first time as the interacting units. Host capabilities of the diporphyrin tweezers were investigated by titrations with (R,R)- and (S,S)-cyclohexane-1,2-diamine (CHDA). The host molecules could be used as multichannel probes of ee by using UV-vis, circular dichroism (CD), fluorescence emission and ¹H nuclear magnetic resonance (¹H-NMR) methods. Chiral configurations could also be differentiated using CD or ¹H-NMR spectroscopy. All three optical techniques give good resolution of ee with reasonable sensitivity considering the low concentrations used (ca. 10⁻⁶ mol·L⁻¹). The ee determination of CHDA enantiomers using NMR spectroscopy is also possible because of the reasonably well separated resonances in the case of (R,R)- and (S,S)-CHDA. Non-metallated (R)-1/(S)-1 hosts could not be used to detect chiral information in a strongly acidic chiral guest. This work demonstrates the utility of 1,1’-binapthyl-linked chiral hosts for chiral analysis of ditopically interacting enantiomers.