Colour and rotation invariant textural features based on Markov random fields

A visual appearance of natural materials significantly depends on acquisition circumstances, particularly illumination conditions and viewpoint position, whose variations cause difficulties in the analysis of real scenes. We address this issue with novel texture features, based on fast estimates of Markovian statistics, that are simultaneously rotation and illumination invariant. The proposed features are invariant to in-plane material rotation and illumination spectrum (colour invariance), they are robust to local intensity changes (cast shadows) and illumination direction. No knowledge of illumination conditions is required and recognition is possible from a single training image per material. The material recognition is tested on the currently most realistic visual representation - Bidirectional Texture Function (BTF), using CUReT and ALOT texture datasets with more than 250 natural materials. Our proposed features significantly outperform leading alternatives including Local Binary Patterns (LBP, LBP-HF) and texton MR8 methods.     

Robust measurement of ocular torsion using iterative Lucas-Kanade

We present a new method to measure ocular torsion using Lucas-Kanade method. After pixels of iris annulus around a pupil have been converted into Cartesian coordinates, 30 features on the iris was selected then the features were tracked using the iterative Lucas-Kanade algorithm to calculate torsional shift. The results show that a precision of the method is higher than those measured by a conventional cross-correlation and by a template matching method. The suggested method showed 0.03 degrees mean error with 0.15 degrees maximum error. Particularly, the method was robust to change of pupil size and misalignment of pupil location. Processing time was also fast enough to be implemented in a real-time system.     

有机混合物渗透汽化分离膜材料及成膜技术的研究进展

本文综述了近年来国内外有机溶剂混合物渗透汽化分离膜材料及成膜技术的最新研究进展。指出了制备超薄而致密的复合型渗透汽化膜是提高膜性能的重要途径。     

Run-to-run control of inductively coupled C2F6 plasma etching of SiO2: Construction of a numerical process with a computational fluid dynamics code

A numerical process to simulate SiO₂ dry etching with inductively coupled C₂F₆ plasmas has been constructed using a commercial CFD code as a first step to design a run-to-run control system. The simulator was found to reasonably predict the reactive ion etching behavior of C₂F₆ plasmas and used to investigate the effects of plasma operating variables on the etch rate and uniformity. The relationship between the operating variables and the etching characteristics was mathematically modeled through linear regression for future run-to-run control system design.     

Cost benefits from standardization of the packaging glass bottles

This study deals with a recycling system with two competing brewers. It is assumed that they coordinate their manufacturing operations through standardization of their glass bottles for easy implementation of extended producer responsibility (EPR). Immediate benefits from the standardization are three folds. Firstly, the sorting and exchange processes of the bottles collected for reuse by each brewer become no longer necessary. Secondly, cost reduction is achieved through streamlining of collection and reuse processes. Finally, under the stochastic demand of glass bottles their inventory holding costs and lost sales cost are reduced via inventory pooling. Through the development of the mathematical models we determine an optimal operation policy of the two brewers that maximizes the sum of benefits obtained from standardization. Numerical examples are solved to show the validity of the model. Sensitivity tests are also performed to examine the effects of system parameters on the objective function value and decision variables.     

Sensitivity enhancement for H2 gas detection using a SnO2–Ag2O–PdOx nanocrystalline system

Thick film H₂ sensors were fabricated using SnO₂ loaded with Ag₂O and PdO_x. The composition that gave highest sensitivity for H₂ was in the wt.% ratio of SnO₂:Ag₂O:PdO_x as 93:5:2. The nano-crystalline powders of SnO₂–Ag₂O–PdO_x composites synthesized by sol–gel method were screen printed on alumina substrates. Fabricated sensors were tested against gases like H₂, CH₄, C₃H₈, C₂H₅OH and SO₂. The composite material was found sensitive against H₂ at the working temperature 125 °C, with minor interference of other gases. H₂ gas as low as 100 ppm can be detected by the present fabricated sensors. It was found that the sensors based on SnO₂–Ag₂O–PdO_x nanocrystalline system exhibited high performance, high selectivity and very short response time to H₂ at ppm level. These characteristics make the sensor to be a promising candidate for detecting low concentrations of H₂.     

A method for evaluating fault coverage using simulated fault injection for digitalized systems in nuclear power plants

The fault coverage for digital system in nuclear power plants is evaluated using a simulated fault injection method. Digital systems have numerous advantages, such as hardware elements share and hardware replication of the needed number of independent channels. However, the application of digital systems to safety-critical systems in nuclear power plants has been limited due to reliability concerns. In the reliability issues, fault coverage is one of the most important factors. In this study, we propose an evaluation method of the fault coverage for safety-critical digital systems in nuclear power plants. The system under assessment is a local coincidence logic processor for a digital plant protection system at Ulchin nuclear power plant units 5 and 6. The assessed system is simplified and then a simulated fault injection method is applied to evaluate the fault coverage of two fault detection mechanisms. From the simulated fault injection experiment, the fault detection coverage of the watchdog timer is 44.2% and that of the read only memory (ROM) checksum is 50.5%. Our experiments show that the fault coverage of a safety-critical digital system is effectively quantified using the simulated fault injection method.     

Parallel optical transmitter module using angled fibers and a V-grooved silicon optical bench for VCSEL array

We propose an advanced structure of optical subassembly (OSA) for packaging of the vertical-cavity surface-emitting laser (VCSEL) array, using (111) facet mirror of the V-groove ends formed in a silicon optical bench (SiOB) and angled fiber apertures. The feature of our OSA can provide a low optical crosstalk between neighboring channels, a low feedback reflection, and a large misalignment tolerance along the V-groove. We describe the optimized design of fiber angle, VCSEL position, and fiber position. The fabricated OSA structure consists of 12 channels of angled fiber array, 54.7/spl deg/ V-grooves, Au-coated mirrors on (111) end facet of the V-grooves, and flip-chip-bonded VCSEL array on a SiOB. In this structure, the beam emitted from the VCSEL is deflected at the 54.7/spl deg/ mirror of (111) end facet and propagated into the angled fiber. The angled fiber array was polished by 57/spl deg/. Fabricated OSAs showed a coupling efficiency of 30%-50% that is 25 times larger than that obtained from an OSA with a vertically flat fiber array. Our OSA showed large misalignment tolerance of about 90 /spl mu/m along the longitudinal direction in the V-groove. We fabricated a parallel optical transmitter module using the OSA and demonstrated 12 channels /spl times/2.5 Gb/s data transmission with a clear eye diagram.     

惯性圆锥破碎机的非线性振动分析

通过对惯性圆锥破碎机工作时的滞回力特性和主振动的分析,建立了破碎机动力学模型,并利用非线性振动理论中的解析方法对其进行了求解和分析,从而得出了物料、弹簧等对振动系统的影响.     

Phase evolution and dielectric properties of MgTi2O5 ceramic sintered with lithium borosilicate glass

Phase evolution, densification, and dielectric properties of MgTi₂O₅ dielectric ceramic, sintered with lithium borosilicate (LBS) glass, were studied. Reaction between LBS glass and MgTi₂O₅ was significant in forming secondary phases such as TiO₂ and (Mg,Ti)₂(BO₃)O. The glass addition was not necessarily deleterious to the dielectric properties due to the formation of TiO₂: permittivity increased and temperature coefficient of resonance frequency could be tuned to zero with the addition of LBS glass, although the inevitable glass-induced decrease of quality factor was not retarded by the formation of TiO₂. The sintered specimen with 10 wt% LBS fired at 950 °C for 2 h showed permittivity of 19.3, quality factor of 6800 GHz, and τ_f of −16 ppm/°C.